Uncategorized

Home/Uncategorized
  • SUPMX-72550 25-50 Drum Sander with Closed Stand, w/ built in casters, 110V, 1-3/4HP The 25-50 Drum Sander is the newest member of SuperMax Tools drum sander family which was designed with new features to improve productivity. Patented Quick Adjustment Lever: reduces set-up time. Turbo Vented dust port: increases airflow to your dust collector by 15%. Rear placement of the Gear Motor: improve conveyor belt tracking. These new features complement the same great features SuperMax Tools have provided for years. Patented Fast Lever: allows quick adjustments for wide and narrow stock INTELLISAND Technology: prevents gouging, damaging, or burning material. The SuperMax 25-50 Drum Sander is the largest open-ended drum sander on the market. Sand 25″ in a single pass, and up to 50” in a double pass. Features:
    • Simple alignment feature Just one nut will adjust the conveyor to parallel the sanding head, making aligning the conveyor to the sanding head fast and easy.
    • Indexed alignment setting Has an indexed alignment setting for narrow and wide stock. When sanding stock wider than 25”, the index lever will properly adjust the conveyor for flawless wide sanding.
    • Easy height adjustments A thrust bearing below the handle and a nut positioned above prevents the drum from moving out of the set position while sanding. No backlash or slop in the height adjustment mechanism allowing easier and smoother height adjustments.
    • Drum will never go “out of alignment” The drum carriage is bolted to the base, preventing any movement or alignment issues.
    • INTELLISAND™ Technology: Automatically adjusts conveyor speed based on load
      • Prevents gouging, damaging or burning stock
      • Provides consistent finish even with varying grain pattern and density
      • Greatly increases abrasive planing and dimensioning speed
    • Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor, guaranteeing flatness to less than .010″ across the width of the sander
    • Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner
    • Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap
    • Easiest access to abrasive fastening system of any drum sander! Extra wide space to access fasteners to eliminate need for special tools.
    • Self-cooling drum prevents overheating and extends abrasive life
    • Tension rollers are adjustable in height and hold down pressure, eliminating snipe
    • Excellent dust extraction as dust cover is formed to shape of drum
      • Metal, not plastic, is formed to maximize air flow and dust extraction
    • Heavy-duty cast iron construction for strength, rigidity and reduced vibration
    • Mobile Base allows for stand and machine to be to moved easily
    • Optional Accessory Available: DRO (digital read out): maintain material thicknesses to increase accuracy and quality.
      Specifications:
    Sanding Capacity: Maximum Width (in): 50 (two passes) Minimum Length (in): 2-1/4 Maximum Thickness (in): 4 Minimum Thickness (in): 1/32
    Dimensions (in): 27D x 46W x 53H (on stand)
    Drum: 5 x 25 extruded aluminum
    Drum Speed: 1740 RPM
    Dust Hood: 1- 4″ vacuum port, min. 600 CFM recommended
    Conveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPM
    Drive Motor (TEFC): 1-3/4 HP
    Power Requirements 110 V 20 amp
    Shipping Weight (lbs): 369 (3 boxes incl. stand)
  • Sale!
    We took our new G1023RL table saw with riving knife and made it even better by including a built-in router table that doubles as a table extension wing. The router table includes support legs and universal T-track router clamping system, and the Shop Fox® Classic Fence included for the table saw doubles as a router table fence. You'll find that using this system is actually much nicer and more convenient than using a typical router table or hand held router for those cuts where the fence is not required to be offset, especially if the table saw is set up with large outfeed tables. Another great advantage is being able to make laser straight dadoes without having to change table saw blades. Please note: this router table does not work with small trim routers. CSA certified meeting CSA C22.2 #71.2-08 and UL 987 standards! SPECIFICATIONS:
    • Motor: 3 HP, 240V, single-phase, 14A
    • Rip capacity: 8" left, 32" right of blade
    • Maximum depth of cut @ 90°: 3"
    • Maximum depth of cut @ 45°: 2-1/8"
    • Assembled table size: 48" W x 27" D
    • Distance from front of table to center of blade: 17"
    • Floor-to-table height: 34"
    • Arbor diameter: 5/8"
    • Arbor speed: 4200 RPM
    • Max. width of dado: 13/16"
    • Overall dimensions: 66" W x 47" D x 39-3/4" H
    • Footprint: 20-1/2" x 20-1/2"
    • Approximate shipping weight: 550 lbs.
    FEATURES:
    • Built-in cast-iron router table extension with adjustable legs
    • Precision-ground cast-iron table
    • 4" Dust port
    • Extra large handwheels ease arbor movement
    • Quickly changes between riving knife and blade guard
    • Magnetic safety switch is standard
    • One-piece steel cabinet type stand
    • All sealed ball-bearing construction
    • Poly-V serpentine belt transfers power more efficiently and with less noise than standard V-belts
    • Underside of blade encapsulated for superior dust collection
    • Certified to UL & CSA standards
    • Includes 10" x 40T blade!
  • Out of stock
    18” Bandsaw #10-342 is an entry level machine to this larger capacity category. Ample 2 HP motor provides plenty of power behind the single 3,200 ft/min blade speed of the machine. Cast iron table includes a single
    ‘T’ slot for use with miter gauges (available separately) or other cutting jigs. Includes 120V electrical outlet on rear of machine. Machine requires 4-wire electrical plug.
  • Sale!

    Need to sand wide panels or that live edge slab on your project list?

    The open frame design of the G0920 22" Open-Ended Drum Sander allows you to sand workpieces up to 44" wide. Simply sand one half, turn the piece around and sand the other half. The 2 HP motor supplies plenty of power to rotate the 5" computer-balanced aluminum sanding drum. The variable-speed conveyor can be adjusted between 0–20 feet per minute. The digital depth gauge offers a precise reading of the distance between the table and the sanding drum. The spring-tensioned sandpaper fasteners make changing belts quick and simple. You’ll get precision results and long-lasting durability thanks to the drum height handwheel, industrial-duty rubber conveyor belt, heavy-duty enclosed stand, and easy conveyor belt tracking. Like all Grizzly drum sanders, the G0920 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0920 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your sander. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the sander are available online and shipped from the Grizzly parts warehouse in Springfield, MO.

    SPECIFICATIONS:

    • Drum motor: 2 HP, 230V, single-phase, 7.5A
    • Feed motor: 50W, 1A
    • Maximum stock thickness: 5"
    • Minimum stock thickness: 1/4"
    • Maximum sanding width: 44"
    • Minimum sanding width: 2"
    • Minimum board length: 9"
    • Sandpaper type: 3" width roll, plain backed
    • Sandpaper speed: 2300 FPM
    • Conveyor feed rate: Variable, 0–20 FPM
    • Drum size: 5"
    • Dust port size: 4"
    • Footprint 23-1/2" x 32-1/2"
    • Overall dimensions 42-1/2" W x 43-1/2" D x 61" H
    • Approximate shipping weight: 341 lbs.

    FEATURES:

    • Variable-speed conveyor
    • Digital thickness readout
    • Spring-loaded sanding belt tension/sandpaper
    • 4" Dust port with hose hook
    • Industrial-duty rubber conveyor belt
    • Push button circuit breaker for easy reset
  • Grizzly Industrial, Inc. has grown into one of the largest machinery companies in the United States. Their products can be found in all sizes of shops from the large industrial production users to the smaller cabinet and machine shops. They have the widest product selection under one brand in the world.
  • Cut both woods and metals with this 2 HP 17" Combination Bandsaw.

    We've taken all the best features from our vertical wood cutting bandsaws and added variable-speed blade control with two speed ranges to allow this Combination 17" Bandsaw to double up as a wood-cutting and metal-cutting bandsaw with the power and cutting capacity to tackle just about anything! You will find many other features that have made Grizzly chainsaws so popular with our customers such as an included cast iron fence with extruded-aluminum rail and resaw fence attachment, rack-and-pinon upper guide adjustment, cast iron trunnion, cast iron wheels and rack-and-pinion table tilt control. This bandsaw has everything you could wish for, including variable speed! The Grizzly G0640X Metal/Wood Bandsaw is covered by a one-year warranty that covers replacement parts and guards against factory defects. The G0640X is supported by a US-based product support team and replacement parts are available on-line and ship from our massive Parts Department in Springfield Missouri. This bandsaw is produced in a ISO 9001 factory to assure quality. Features:
    • Variable speed control
    • Requires single-phase power
    • Left and right table tilting control
    • Upper and lower ball-bearing blade guides
    • Rack-and-pinion adjustment on upper blade guide support
    • Precision-ground cast iron table
    • Fully balanced cast iron wheels with rubber tires
    • Quick release blade tension
    • Two 4" dust ports
    • Includes rip fence and miter gauge
    • Rip fence comes with: magnified cursor, dead lift quick release, solid lever lock and extruded aluminum resaw fence that also transforms for cutting thin stock
    Specifications:
    • Motor: 2 HP, 220V, 3-phase, 1725 RPM, 8 Amps (Actually runs on single-phase, 220V)
    • Maximum cutting height: 12"
    • Throat capacity: 16-1/4"
    • Blade length: 131-1/2"
    • Blade size range: 1/8"-1"
    • Included blade size: 131-1/2" x 1/2" x 6 TPI (similar to Grizzly model H4807 wood cutting blade)
    • Blade speed: Variable, 100-3600 FPM
    • Table tilt: 45° right, 5° left
    • Floor to table height: 37-1/2"
    • Table size: 23-5/8" x 17-1/4"
    • Overall size: 32" W x 73" H x 32" D
    • Approximate shipping weight: 416 lbs.
  • Out of stock
    The Rikon 10-353 14" Professional Bandsaw is equipped with a large work table measuring 21-1/2" x 15-3/4" and a 13-5/8" throat which will allow the user to cut thicker material on a compact saw. The 3 HP motor with a blade speed of 4300 ft/min provides ample power for re-sawing and cutting other materials, such as, plastic composite and foam materials.
  •  
    From Oneida, the Supercell High-Pressure Dust Collector, 14 Gallon, may be the solution to your dust collection problems. Named for one of the world's most powerful cyclonic storm systems, the Supercell is the first and only dust collector on the market with enough static pressure and air movement to effectively capture and contain dust from every tool in the shop with a dust port size of 1" to 5". From the smallest handheld sanders, table saws and miter saws, to jointers, planers and even CNC Routers this unit is a workhorse that can handle some of the largest jobs.

    The Supercell is especially useful for problematic 2" diameter ports where standard collectors don't provide adequate suction and wet/dry vacuums can't move enough air to effectively collect dust and debris. With an adaptable design, it mounts conveniently to the wall and can be installed virtually anywhere in the shop. With easy tool connections, connect as far away as 100' and up to 4" hose and ductwork. Packed with innovative features, including HEPA filtration with internal pulse filter cleaner and dust bin level sensor, the Supercell is the perfect dust collection system for the big or small shop. Patent Pending

    Features

    • 10x higher suction power than standard dust collectors
    • Accommodates simultaneous use of up to 3 tools with 1" to 2.5" dust ports
    • 3 - 1300W modular motors (combined 5HP equivalent) operates at 230V with magnetic starter and overload protector
    • Wireless remote control operates at radio frequency
    • Ultra-high efficiency cyclone separator removes 99% of dust from incoming airstream
    • Premium HEPA filtration rated at 99.97% efficient at 0.3 microns with non-stick, PTFE membrane
    • Internal pulse filter cleaner removes clogs in seconds
    • Lightweight 14-gallon mobile dust bin with liner bag holder and fill level viewing window
    • Dust Sentry automatically alerts When the dust drum/dust bin is full
    • Mounts to walls with standard 16" stud spacing. Inlet rotates to match your shop layout.
    • Includes 25' of reinforced, 4" diameter vacuum-pressured rated flex hose

    Specifications

    • Maximum Suction Rating: 97.8" WC
    • Motor Type: 3x 1300W Modular Motors
    • Horsepower: 5HP Total
    • Motor Speed: 48,800RPM
    • Phase: 1PH/Single Phase
    • Amperage: 17A
    • Voltage: 208-230V
    • Cycle: 60HZ
    • Listed FLA: 18A
    • On/Off Switch: Magnetic Starter with on-off Switch preset for Included Remote
    • Power Cord Length: 10'
    • Power Connector: NEMA 6-20
    • Recommended Circuit Size: 20 A
    • Recommended Circuit Type: HACR
    • Sound Emission: 80 dBA at 10'
    • Filter Media Type: HEPA Certified
    • Filter Efficiency: 99.97% at 0.3 microns
    • Filter Surface Area: 40 sq. ft.
    • CFM Rating: 465 CFM
    • Merv Rating: 16+
    • Waste Capacity: 14 Gallons
    • Primary Build Materials: Cold rolled steel, SD Polyethylene, seam welded
    • Static Resistance Rating: Conductive (metal)
    • Inlet Size: 4" O.D.
    • Discharge Size: 5"O.D.
    • Measurements: 20"w x 21" d x 61" h
    • Weight: 76lbs

    Includes

    • Fan Motor Assembly
    • Magnetic Starter
    • Remote Control
    • Cartridge Filter
    • Pulse Filter Cleaner
    • Cyclone Separator
    • Wall Bracket
    • Blast Gate
    • Turn Key Clamp - 2 each
    • Mobile Dust Bin
    • Dust Sentry Bin level indicator
    • Bag Retainer System
    • 25' x 4" Vacuum Pressure rated Hose
    • 5 Liner Bags
    • Viewing Window
    • Hardware
    1 year warranty
  • G0453Z 15" 3 HP Planer with Spiral Cutterhead

    Upgrade to a spiral cutterhead with power to spare.

    The G0453Z 15" 3 HP Planer with Spiral Cutterhead recognized ahead of the rest of the 15" planers tested by WOOD Magazine for its combination of clean cuts and the ability to control snipe. The 4-row spiral cutterhead with 74 German-made indexable carbide inserts cut some of the finest surface finishes money can buy. Each insert can be rotated up to three times to expose a new sharp edge for superior finish. Reducing the cut to the size of a single insert makes for a cleaner cut and reduces noise compared to the traditional straight knife cut. The 3 HP motor spins the cutterhead at 4800 RPM to plane your stock up to 15" wide by 8" thick, cutting as deep as 1/8" per pass. Additionally, the G0453Z features a built-in mobile base, adjustable bed rollers, two-speed automatic board feed, and solid cast-iron extension wings. Like all Grizzly planers, the G0453Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0453Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your planer. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. CSA certified Note on replacement inserts:
    • Models manufactured April 2015 and later use H7319 (74) 14mm x 14mm x 2.0mm replacement inserts.
    • Models manufactured March 2015 and earlier use T21348 (74) 14.17mm x 14.17mm x 2.0mm replacement inserts.
    SPECIFICATIONS:
    • Motor: 3 HP, 240V, single-phase, 15A
    • Maximum stock width: 15"
    • Maximum stock thickness: 8"
    • Minimum stock thickness: 3/16"
    • Minimum stock length: 8"
    • Maximum cutting depth: 1/8"
    • Cutterhead diameter: 3"
    • Cutterhead type: 4-row spiral, 74 inserts
    • Cutterhead speed: 4800 RPM
    • Feed rate: 16 & 30 FPM
    • Table size with extensions: 15" x 42"
    • Dust port size: 4"
    • Footprint: 22" x 22-1/2"
    • Overall dimensions: 32-1/2" W x 42" D x 45-7/8" H
    • Approx. shipping weight: 672 lbs.
    FEATURES:
    • Board return rollers
    • Pedestal-mounted control panel
    • Built-in mobile base
    • Adjustable bed rollers
    • Rubber-coated outfeed roller
    • Built-in lifting rods
    • Angled dust port hood
    • Magnetic switch with thermal overload protection
    • Four-column support with table locks
    • Precision-ground, cast-iron table and extension wings
    • Heavy-duty cast-iron construction
  • Cut panels and wide stock all day long with this 10" Heavy-Duty Cabinet Table Saw. A 52" rip capacity and extended side and rear tables will support a full sheet of plywood, making ripping and cross cutting operations safe and simple. A guard with splitter or interchangeable riving knife helps prevent binding and kickback, and a rail mounted magnetic switch with thermal overload protection provides additional safety features. Bevel cutting is also safe and precise with the left tilting blade and digital angle display. Includes a miter gauge and 10" blade. CSA certified meeting CSA C22.2 #71.2-08 and UL 987 standards! SPECIFICATIONS:
    • Motor: 3 HP, 220V, single-phase, 13A
    • Rip capacity: 52" right, 18" left of blade
    • Max. depth of cut @ 90°: 3-3/16"
    • Max. depth of cut @ 45°: 2-3/16"
    • Table size with extensions: 75-3/4" W x 27" D
    • Distance from front of table to center of blade: 14-7/8"
    • Floor-to-table height: 34-7/8"
    • Arbor diameter: 5/8"
    • Arbor speed: 4000 RPM
    • Max. width of dado: 3/4"
    • Overall dimensions: 91-1/2" W x 75" D x 40-5/8" H
    • Footprint: 22-7/8" L x 21" W
    • Approximate shipping weight: 716 lbs.
    FEATURES:
    • Digital readout for bevel angle
    • Precision-ground cast-iron table
    • Cast-iron trunnions
    • 3/8" x 3/4" T-slots & miter gauge
    • 4" Dust port
    • Poly-V serpentine drive belt
    • Steel cabinet with hinged motor cover
    • Right hand and rear extension tables
    • Magnetic switch with thermal overload protection and lock-out padlock
    • Quickly changes between riving knife and blade guard/spreader assembly
    • Certified to UL & CSA standards
    • Includes 10" x 40T blade & push stick