Uncategorized

/Uncategorized
  • Out of stock
    The Bessey F-Style clutch bar clamps come with cast heads with powder-coated finish to resist corrosion and chipping. Bessey provides a zinc finished rail with a two piece clutch plate system for opening and closing the lower movable jaw. The Bessey clutch clamps are also provided with protective pads on both the top and bottom jaws and come with a comfortable wooden handle. Clutch style, bar clamp, medium duty clamp, suitable for a wide range of woodworking & DIY projects, durable powder coated cast iron fixed & sliding jaws, nickel plated, drawn & serrated Rail, 2 piece Clutch plates for easy positioning, non-marring protective pads, ergonomically Shaped wood handle, 24" clamping capacity, 2-1/2" throat depth, 600 lb clamping force.  
    • ANCHORSEAL 2 is a hybrid of plant-based polymers and wax that protects the ends of green logs and lumber from end checking and splitting. AS2 controls the rate of moisture loss during air drying for hardwood, exotic hardwood decking and softwood. It is a high-performance, economical choice for sealing green wood and fresh cut lumber. ANCHORSEAL 2 is best-in-class for the protection of deck end cuts for exotic hardwood species. When carefully applied to the freshly cut ends of tropical hardwoods, such as ipe, Brazilian cherry, mahogany, teak, cumaru & tigerwood, AS2 prevents up to 90% of end checking, protecting your investment and extending the life of the deck. It is also a preferred end grain sealer of the woodworking industry for wood bowls, turning blanks, cookies & live-edge wood slabs. Features: Prevents up to 90% of end checks and drying splits on logs and freshly cut lumber • Hybrid formula combines wax with natural plant-based polymers • Can be applied to all species of hardwood or softwood • Helps prevent blue stain and sapstain caused by damaging fungi • Water based, non-toxic formula, soap & water clean-up • Available in clear or more than 35 colors • Winterized formulas available Coverage: 100 sq. ft./gallon, depending on application method and wood species. Surface Preparation
      • All areas to be coated should be clear of dirt and debris
      Application
      • Apply ANCHORSEAL 2 using a brush, roller or sprayer until it begins to drip slightly
      • For optimal coverage, use a gas engine, electric, air operated or backpack sprayer from U·C Coatings
      • If using spray equipment other than those sold by U·C Coatings, use 0.21”/0.55 mm tip or larger
      • Logs larger than 24”/60 cm in diameter will require a heavier coating, or two coats must be applied within a 15 minute period
      • If applying to the cut ends of deck boards: apply ANCHORSEAL 2 carefully with a thin brush or sponge applicator. To avoid potential staining, do not allow ANCHORSEAL 2 to get on the face of the boards.
      • If you need a deck end cut sealer that penetrates below the surface of wood that can be painted or stained over, we recommend SEAL ENDS ONCE (also made by U-C Coatings)
      Cleanup & Storage
      • Clean application equipment using hot soapy water
      • Store unused ANCHORSEAL 2 above 50°F/10°C to prevent freezing. Winterized formulas will protect against freeze damage
  • Magswitch Universal Mounting Base – 8110112 The centerpiece of the Magswitch Workholding System. Additional tool attachments shown are designed to fit the Universal Mounting Base and are sold separately. Features
    • Low profile design enables use on small surfaces including fences and small table tops.
    • Requires (2) MagJigs to secure the Universal Base to a steel or cast iron surface.
    • Accepts both MagJig 150 (150 lbs of hold force) and MagJig 95 (95 lbs of hold force).
    • Simply add the desired tool attachment, place anywhere on any steel or cast-Iron tabletop, and you’re ready to go.
    • Add more Universal Mounting Bases and MagJigs to use more multiple tools at the same time.
  • The DELTA 31-423 12-inch 120 Grit Sanding Disc feature an aluminum oxide abrasive for effective, long lasting sanding. This disc fits the DELTA 31-120, 31-280, and 31-730 sanders, as well as others that require 12-inch adhesive-backed discs. This pack includes two discs.
  • Outer Pleated Filter (5 micron) for 62-400
    • For use with 62-400
    • Filter size: 9-1/2″ x 16-1/2″ x 1″
    • 5 Microns
    • Cardboard frame
  • Positive locking brake pedal not only stops the wheel from rotating, but it also locks the swivel in place. These hooded casters have a ball bearing swivel that allows effortless direction changes. These 6-1/4" black rubber swivel lock casters have a M16-2.0 x 40mm stud and 320 lbs. capacity.
  • Out of stock
    Rikon C10-108 Guide Bearings for 10-300, 10-305, 10-308 (6 Pack)
  • M1 Oil

    Starrett M1® industrial lubricant produces a micro-thin, airtight coating that simultaneously dries as it protects, avoiding dirt, grime, etc. It dries and will not attract dirt, dust or other contaminants as other leading lubricants do. Features: • Silicone free • Stands up to extreme temperatures • Penetrates quickly to free frozen nuts, bolts and metal parts • Removes grease, tar and grime from metal parts and painted surfaces • Cleans and polishes for lasting protection • Protects metal against rust and corrosion damage • Instant lubrication properties that spread into hard-to-reach areas to stop squeaking and sticking • Gets under moisture to lift it away from the surface • Prevents short circuits in high moisture environments. You are purchasing one can.
  • Out of stock
  • Out of stock
    • Paint and Wood Scraping
    • Stucco, Glue, and Wax Removal
    • Lead Abatement and Drywall Shaping
    • Boat Scraping
    • Flooring and Wall Scraping
  • Out of stock
    Details
    • Advance silicone material for increased comfort and greater durability
    • Proprietary 3M™ CoolFlow™ valve helps makes breathing easier
    • Dual-mode head harness adjusts easily for either standard or drop-down mode
    • Exhalation valve cover directs exhaled breath and moisture downward to reduce fogging
    • Color coded to indicate size (small, medium or large) for easy identificatio

    This half facepiece reusable respirator 7500 Series uses advanced silicone material to help provide comfortable and durable respiratory protection. The 3M™ Cool Flow™ Valve helps make breathing easier and can reduces heat and moisture build-up for cool, dry comfort.

    The 3M™ Half Facepiece Reusable Respirator 7500 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved 3M cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator (commonly referred to as a “mask”) helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). This respirator uses an advanced silicone material that provides a softer feel on the face. A unique adjustment design helps reduce pressure points on the face for even more comfort. The 3M™ Cool Flow™ Valve helps make breathing easier and can offer cooler and drier comfort for the wearer. Head harness may be adjusted to drop down when not in active use (allows respirator to be removed without taking off hard hat). The exhalation valve cover directs exhaled breath and moisture downward while helping protect the valve area from debris while also making for easier cleaning. Recommended applications include abatement, painting, welding, chemical handling, construction, utilities, mining, pharmaceutical, and smelting. NIOSH, a Federal government regulatory agency, has tested and approved the 7500 Series with 3M™ cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. This half facepiece respirator may be used with 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™ Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ half Facepiece Reusable Respirator 7500 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.

  • Out of stock
    Details
    • Advance silicone material for increased comfort and greater durability
    • Proprietary 3M™ CoolFlow™ valve helps makes breathing easier
    • Dual-mode head harness adjusts easily for either standard or drop-down mode
    • Exhalation valve cover directs exhaled breath and moisture downward to reduce fogging
    • Color coded to indicate size (small, medium or large) for easy identificatio

    This half facepiece reusable respirator 7500 Series uses advanced silicone material to help provide comfortable and durable respiratory protection. The 3M™ Cool Flow™ Valve helps make breathing easier and can reduces heat and moisture build-up for cool, dry comfort.

    The 3M™ Half Facepiece Reusable Respirator 7500 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved 3M cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator (commonly referred to as a “mask”) helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). This respirator uses an advanced silicone material that provides a softer feel on the face. A unique adjustment design helps reduce pressure points on the face for even more comfort. The 3M™ Cool Flow™ Valve helps make breathing easier and can offer cooler and drier comfort for the wearer. Head harness may be adjusted to drop down when not in active use (allows respirator to be removed without taking off hard hat). The exhalation valve cover directs exhaled breath and moisture downward while helping protect the valve area from debris while also making for easier cleaning. Recommended applications include abatement, painting, welding, chemical handling, construction, utilities, mining, pharmaceutical, and smelting. NIOSH, a Federal government regulatory agency, has tested and approved the 7500 Series with 3M™ cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. This half facepiece respirator may be used with 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™ Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ half Facepiece Reusable Respirator 7500 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.

This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.