-
Out of stock
Engineered for top performance, the SIMPSON pressure washer trailer 3800 PSI at 3. 5 GPM is a self contained cleaning machine. Designed to utilize the power and performance from top of the line SIMPSON pressure washers matched with the portability of a utility trailer, it lets you bring a cleaning solution into the field, where water supply is an issue. The 95001 is run by a Honda engine and comes with a 100’ hose, an ergonomic spray gun and 5 Quick-Connect nozzles. This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning. Warranty Details: Engine - 3 Year Limited Commercial Warranty | Pump - 5 Year Limited Warranty | Frame - 1 Year Limited Warranty -
Out of stock
This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning. The SIMPSON mobile pressure washer 4200 PSI at 4. 0 GPM is a self-contained cleaning machine. Engineered to utilize the power and performance from top of the line SIMPSON pressure washers, it’s matched with the portability of a utility trailer. The 95002 is run by a Honda engine and comes with a 100’ hose, an ergonomic spray gun and 5 Quick-Connect nozzles. This mobile system brings a cleaning solution into the field where water supply is an issue. This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning.Warranty Details: Engine - 3 Year Limited Commercial Warranty | Pump - 5 Year Limited Warranty | Frame - 1 Year Limited Warranty -
Out of stock
The SIMPSON trailer pressure washer 3200 PSI at 2.8 GPM is a self-contained cleaning machine. Engineered to utilize the power and performance from top of the line SIMPSON pressure washers matched with the portability of a utility trailer. The 95000 is run by a Honda engine and comes with a 50’ hose, an ergonomic spray gun and 5 Quick-Connect nozzles. This mobile system brings a cleaning solution into the field where water supply is an issue. This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning. Warranty Details: Engine - 3 Year Limited Commercial Warranty | Pump - 5 Year Limited Warranty | Frame - 1 Year Limited Warranty -
Sale!
Out of stock
- Motor: 2 HP
- Cutting capacity - rectangular: 9-1/2 in.
- Cutting capacity - round: 10 in.
- Blade speeds: 98 - 394 FPM
- Blade length: 132 in.
- Head type: Swivel
- Footprint: 28-1/2 in. x 45 in.
- Overall height: 58 in.
- Shipping weight: 967 lbs.
-
Out of stock
This T1242 30-Ton Electric/Hydraulic Shop Press features a 3 HP, 220V, single-phase hydraulic pump motor, horizontally adjustable sliding piston head, easy-access push-button controls, 10" stroke, and table-to-piston distance of 7-3/4" to 39". Includes carriage/table lifting chain, two table plates, and a full-size rear guard plate. -
Out of stock
Grizzly G0901 28" Portable Sawmill
Buy now to lock in the sale price! Orders won’t ship until Spring 2021
Mill your own lumber right off your property!
The all-new Grizzly G0901 28" Portable Sawmill is designed for quick setup with a rock-solid, 12-foot steel track with adjustable feet capable of leveling on just about any surface. The track is modular, allowing you to easily attach and level additional 6-foot-long sections in order to mill practically any length of lumber you need. The cut thickness is set in 1/16" intervals with the locking hand crank and the sturdy 4-column saw carriage moves smoothly along the track on ball-bearing rollers. Two adjustable work stops hold the log in place, while a manually adjusted workpiece clamp prevents movement during cuts. Our engineers worked hard to create the ultimate sawmill with the capacity and solid performance needed to get the job done right in the field! The G0901 28" Portable Sawmill comes with a one-year warranty which covers replacement parts. The product is supported by a US-based support team and parts are available online and shipped from our massive parts department in Springfield, MO. FEATURES:- Modular track system for varying length requirements
- Hand throttle allows easy blade speed control during the cut
- Locking hand crank with detents for quickly setting cut thickness in 1/16" increments
- Ball-bearing rollers provide smooth movement of saw carriage along track
- Leveling feet for stabilizing saw mill on uneven ground surface
- Adjustable work stops and clamp for holding log in place during cut
- Onboard water reservoir with drip nozzle for blade lubrication
- Gas engine: 13-1/2 HP Briggs and Stratton®
- Included track length: 144"
- Maximum log diameter: 28"
- Maximum cut width: 22"
- Maximum cut thickness: 6"
- Blade size: 1" x 144"
- Wheel diameter: 19"
- Footprint: 35" x 144"
- Overall dimensions: 75" W x 144" L x 56" H
-
Out of stock
Sand stock up to 36-1/2" wide and 4" thick with variable speed feed control and the economy of spiral-wrapped 6" wide sandpaper rolls. Built for production environments, these Drum Sanders feature industrial-quality conveyor belts and dual 6" sanding drums. Includes a 4-port dust scoop to maximize dust collection, easy access to sanding drums, emergency stop for safety, solid steel construction, independent motor control, amp load meter, and massive power with a 10 HP, single-phase motor. With the variable-speed control on the conveyor, you can dial in the perfect finish you need for each job. CSA certified meeting CSA C22.2 #105-1953 and UL 987-8 standards! -
Out of stock
- Built for industrial 8-hour shifts.
- Massive 37”-wide and 6”-high maximum capacity.
- Thickness sander with a minimum of ⅛” allows you to tackle a wide range of projects.
- 7.5 hp motor drives 2 steel drums.
- Hard durometer rubber coating on drums ensures a flat, mar-free finish.
- Independently adjustable rear drum makes fine-tuning easy.
- Cast iron table incorporates 4 solid jackscrews.
- Conveyor belt provides a great grip on your material.
- ¼ hp variable-speed feed motor lets you adjust between 3.7 and 14.2 surface feet per minute.
- DRO shows the thickness of your material, so you can reach the exact result you want.
- Dual drums allow you to use 2 different grits at once—first to take off thickness, then to smooth out the finish.
- Quick clamp changeover system for attaching sanding paper to your drums saves you time and effort.
- Our large sander's thick steel base prevents vibrations. Most other companies’ machines are not so heavily and rigidly built.
- Cabinet in the base provides a great place to store your extra belts.
- 2 dust ports can hook up to your dust collector and help maintain high air quality in your shop.
- Large orange safety brake lets you immediately stop the machine when necessary.
- Covered by a 1-year parts warranty.
- Replacement drum sander parts are in stock at our Wisconsin headquarters, so we can get them to you quickly.
- We include lifetime technical support by phone from a team of reps with hands-on machine experience.
-
Sale!
Out of stock
This 3 sided, heavy-duty shaper will pay for itself quickly in cabinet and production shops that normally require several shapers or time consuming cutter changes. The combinations of cutters and set-ups you can utilize on this machine are endless. -
G0709 14" x 40" Gunsmithing Gearhead Lathe
An accurate and powerful lathe.
What makes the G0709 14" x 40" Gunsmithing Gearhead Lathe a "gunsmithing" lathe is that it comes with features typically not found on standard lathes, such as the high-precision NSK bearings, extra-large 1-9/16" spindle bore and a "spider" mount system. The spider mount system has four brass-tipped screws that stabilize long shafting and rifle barrels through the outboard end of the spindle. Supplied with a 2 HP motor, the 8-speed gearhead of the G0709 produces spindle speeds from 70-2000 RPM. The tailstock lock system features a drive hub, which allows you to use a 1/2” torque wrench to clamp the tailstock in place at a pre-determined torque setting. This ensures consistent draw-down alignment every time, even with multiple lathe operators using the machine. The G0709 features a foot brake that also acts as a safety device and can bring the machine to an instant stop. The G0709 also comes with a D1-5 spindle, a 200 series quick change tool post, flood coolant system, LED work light, and a pull-out chip tray. Like all Grizzly gunsmithing lathes, the G0709 comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0709 manual was written by our U.S. based Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your lathe. The Grizzly Technical Support team is U.S. based. Parts and accessories for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.SPECIFICATIONS
- Motor: 2 HP, 220V, single-phase, 10A
- Swing over bed: 14"
- Distance between centers: 40"
- Swing over saddle: 13-13/16"
- Swing over cross slide: 8-13/16"
- Spindle bore: 1.57" (40mm)
- Spindle nose taper: MT#5
- Spindle nose: D1-5 Camlock
- Spindle speeds: 8, 70-2000 RPM
- Carriage travel: 36"
- Cross slide travel: 6-11/16"
- Tailstock barrel taper: MT#3
- Tailstock barrel travel: 3-15/16"
- Overall dimensions: 71-1/2" L x 26-3/16" W x 52" H
- Approximate shipping weight: 1550 lbs.
FEATURES
- Easy-to-use lever controls
- Hardened and ground cast-iron bed
- Cuts 4-112 Standard TPI and 0.1-7 Metric
- Cuts LH threads
- On/off reverse switch on carriage
- Socket for tailstock lock
- Cast aluminum gear cover
STANDARD EQUIPMENT
- 6" 3-Jaw chuck with reversible jaws
- 8" 4-Jaw chuck with independent jaws
- 11" face plate
- Steady rest/follow rest
- Full length splash guard
- Quick change tool post with 2 tool holders
- (2) MT#3 dead centers (1 carbide tipped)
- (1) MT#3 live center
- (1) MT#5 - MT#3 sleeve
- Pull out chip pan
- 1/2" drill chuck w/ MT#3 arbor
- Toolbox
-
Out of stock
-
Out of stock
10 Horsepower 3-Phase 24" Wide Belt Wood Sander with Pneumatic Oscillation Control
These machines were developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. This collaboration resulted in the introduction of the G9962Z & G9962ZX, which have become the "staple" of the guitar building industry. The main features that enable these sanders to process short pieces efficiently are the single drum and double infeed and outfeed pressure rollers positioned close to the drum. The result is a continuous downward pressure on extremely thin stock as short as 9", which is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of hard rubber to prevent distortion of thin stock while sanding. Features include digital read out, powered table elevation, variable speed conveyor, disc brake stopping system, pneumatic belt tracking, pneumatic belt oscillation, and separate motors for the drum, feed rollers, and table elevation.
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com