-
-
Out of stock
- Sturdy Four-Post, chain driven design ensures smooth operation
- Above the table height and lock adjustment results in simpler, more efficient adjustments
- Precision milled aluminum plate and level screws result in a smooth, accurate, and easily adjustable work surface
- Fits Powermatic PM2000B Router Extension Table, and Jet Router Table
-
Out of stock
NEWMotor Motor Speed (no load) Amps, Hertz, Phase Dust Collection Velocity CFM Max. Static Pressure (at 0 CFM) Blower Impeller Sound Rating @ 6 Feet Canister Filtration Rating Filtration Efficiency Canister Pleated Filter Size Total Pleated Filter Surface Filter Cleaning Method Plastic Bag Length (installed) Plastic Bag Capacity Dust Ports / Hose Connections Intake Funnel Size Machine Certification1HP, TEFC 3,450 RPM 7 A / 3.5 A, 60 Hz, 1 Ph 800 @ 4” or 1,100 @ 5” inlet 7.2” 10” Diameter, Aluminum <86.375 dB 1 Micron 99% 19-5/8” x 7-1/8” 13.46 sq/ft Hand crank, internal rotating flapper 20” 1.5 Cu. Ft. 1 @ 5”, 2@4” 5” diameter All metal frame -
The Delta 14-651 bench mortiser is key for woodworking, cabinetry, furniture and boat building. The 1/2 HP motor and 3/8-inch capacity chuck mortises hard and soft woods. It has four chisels and bits (1/4-inch x 1/4-inch; 5/16-inch x 5/16-inch; 3/8-inch x 3/8-inch; 1/2-inch x 1/2-inch). A cast iron base, adjustable fence and head ease adjustments between projects. 9 3/8-inches under head to base with a 5-inch stroke accepts multiple sizes assemblies and stock. The head can be turned 180 degrees and re-mounted for off-table mortising; the height attachment adds 1-3/4-inch under the head delivering excellent versatility in the shop. An adjustable stop makes repeat mortises easier. The tool comes with chuck key/hex wrench for bit/chisel changes.- Easy and open access to drill chuck for bit changing
- Large cast-iron base with center through hole
- Adjustable rack and pinion fence and rack and pinion head raising and lowering
- Mortising head column can be turned 180 degree and remounted for off-table mortising
- Adjustable fence and hold down; Adjustable dovetail way on mortising head
-
Out of stock
New! 10” PORTABLE TABLE SAW WITH STAND #11-600S is a must-have for homeowners, small shops, and contractors. This portable saw has a powerful 2HP, 15A, 110V variable speed motor that has the strength to tackle any project. Selecting the proper blade speed allows the user to dial in precision, and performance for each type of material to be cut.This technology retains torque throughout the cut which will prevent burning of material and premature dulling of blades. This portable saw has all the features of a large shop saw including a quick-release blade guard, riving knife for through cuts and the capability of cutting 13/16” dados. Rack and pinion gearing for rapid blade elevation and lowering. Includes portable, foldable stand for easy transport and storage.-Powerful 2 HP, 1Ph, 110V, variable speed motor-Blade speed variable from 2000 to 4200 RPM-28 In. maximum rip capacity to right of the blade-Arbor lock for safe and rapid blade changes-Adjustable rear work support-2-1/2 In. standard dust port=Onboard fence, tool and accessory storage -
Out of stock
With 12" wide capacity and three sheet metal functions in one unit, there is no need to spend extra money and tie up shop space with three single-use machines. You'll love the convenience and accuracy of these do it all machines!Specifications
- Maximum capacity in mild steel: 22-gauge
- Roll diameter: 1-1/2"
- Approximate shipping weight: 116 lbs.
-
Out of stock
This set is perfect for shaping moldings for fine furniture and other casework. The set consists of a cove cutter and six router bits with inverted profiles. The cove cutter mounts on your tablesaw and is used in conjunction with a pair of angled fences.- Make crown molding that surpasses anything you'll find at the lumberyard.
- The set consists of a 7-inch diameter, 5/8-inch arbor cove cutter, six 1/2-inch shank router bits.
- Bits with inverted design, so your workpiece remains in contact with your router table for accuracy and control.
- For cutting plywood, hardwood/softwood on router tables only. Not for use on hand-held routers.
- CMT bits were rated the best overall in comparison to other brands
-
Dust-resistant and powerful cordless angle grinder for effective cutting, grinding and deburring work in installation use. Details- Guarantees the highest service life with the next generation of brushless FEIN PowerDrive motors. The completely closed motor housing protects the motor against aggressive ceramic and mineral dusts.
- Ideal for any application. Optimal speeds, matched to many grinding media and materials thanks to infinitely variable electronic speed setting selection.
- High-performance. 30% higher degree of efficiency than comparable universal motors with 1,100 watts of input power.
- Maintenance-free motor with innovative cooling fins for optimal heat dissipation including temperature monitoring.
- Maximum cutting speed with FEIN HighPower Li-ion batteries. High-current cells with continuously high current output and 75% higher amperage than Li-ion batteries.
- Very smooth running and vibration-free operation through the standalone motor—decoupled from the housing—and four additional vibration dampers.
- Extensive user protection through soft start, restart protection, electronic overload protection and brake.
- Low-fatigue working thanks to a slim grip, compact design and low weight with good balance.
- Dust-protected, separate motor electronics in the grip area.
- Flexibility with the FEIN MultiVolt interface. Tool can be used with all FEIN Li-ion batteries (12-18 V).
- Short set-up times thanks to the tool-free adjustable safety guard and rapid-clamping nut.
- Well-lit work area thanks to the integrated LED lamps.
- Stackable toolbox made from sturdy plastic and space for grinding material and accessories.
- ** Highest performance with FEIN HighPower Li-ion battery.
-
Features
- Powerful 15 amp motor produces up to 5000 RPM to power through tough jobs
- Rack and pinion fence rail system for fast, precise adjustment
- Up to 32 ½” Right rip and 22 ½” Left rip capacities
- Flip down ripping fence allows for narrow rip cuts
- Heavy duty tubular frame is job-site tough
- “One-Step” folding stand for easy transport, storage and vehicle loading
- 2 ½ in. dust port allows for vacuum hook up to keep the work area clean
- Fence and guard storage on sides of saw
- UL Listed
-
Specs
- Max. Depth of Cut at 90º: 3.5 in. (88.9 mm)
- Max. Depth of Cut at 45º: 2.5 in. (63.5 mm)
- Max. Rip Right of Blade: 32.5 in. (825.5 mm)
- Max. Rip Left of Blade: 22.5 in. (571.5 mm)
- Motor: 15 amp, Single phase, 60 Hz
- Voltage: 120 V
- Speed: 5000 RPM
- Arbor: .625 in. (15.875 mm)
- Blade Tilt: 45º Left
- Dado Capacity: .8125 in. x 8 in. Stacked Dado
- Dust Port Size: 2.5 in. (63.5 mm)
- Table Size: 26.63 in. wide X 21 in. deep
- Table Coating: Anti-Friction
- OVERALL DIMENSIONS:
- Length: 45 in. (1143 mm)
- Width: 25 in. (635 mm)
- Height: 42 in. (1066.8 mm)
- Weight: 78 lbs. (35.3802 kg)
- SHIPPING PACKAGE DIMENSIONS:
- Dimensions: 35 in. X 27 in. X 19 in. (889 mm X 685.8 mm X 482.6 mm)
- Weight: 86 lbs. (39 kg)
-
Out of stock
The JBOS-5 Benchtop Spindle Sander has a 1/2HP motor, and a large 14-1/2” tilting table. A heavy-duty worm gear system provides one-inch oscillating action, which prolongs sleeve life and helps prevent burnishing of the workpiece. Four inserts are provided, and 5 spindles with sanding sleeves. -
Out of stock
After nearly 90 years of expertise in the woodworking business, DELTA Power Equipment Corporation (DELTA PEC) has become one of the most revered brands in woodworking tools today. DELTA Power Equipment Corporation focuses on innovations to help the woodworker create masterpieces easier and with more precision. The company designs, manufactures and distributes a variety of stationary woodworking tools including electric table saws, band saws, radial arm saws, scroll saws, drilling machines, jointers, planers, mortisers, lathes, grinders and dust collectors for the professional and advanced woodworking markets.- Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
- Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
- Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
- Tool-free blade clamp allows for quick, easy blade changes in seconds
-
Made with Sjöbergs' signature European craftsmanship, the new Nordic 1350 Workbench is the perfect mix of unparalleled quality and an unbeatable limited-time retail price.An unfinished worktop to meet custom finish needs. Unlike the Nordic 1450, the Nordic 1350 has a hard unfinished birch worktop, allowing woodworkers to customize it to meet their needs.Designed to fit in any workshop. With a total dimension of 58.3 x 24.8 inches, the Nordic 1350 is designed to use minimal space, while offering all the amenities of a wooden workbench.Expand capabilities with accessories. The Nordic 1350 workbench is compatible with all Nordic 1450 accessories, including the storage cabinet.
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com