Shop

Makita XCU04PT 36V (18V X2) LXT® Brushless 16″ Chain Saw Kit (5.0Ah)

$545.95

Landscapers and contractors are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 36V (18V X2) LXT® Brushless 16” Chain Saw (model XCU04PT). With zero emissions, lower noise, and considerably less maintenance, the XCU04PT is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® batteries for maximum power, speed and run-time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.

The XCU04PT has a 16” guide bar and the Makita-built Outer Rotor BL™ Brushless Motor direct drive system motor with variable speed delivers 0-3,940 FPM for increased cutting speed. It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion batteries, and the saw is ready to use. Convenience features include a "tool-less" chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

Add to cart Details
General IntL 10-2000 Ceiling Mount Air Filtration System

$545.99

This air filtration system is setting new standards in clean air. With the smart technology the laser sensor continually scans the air in the room for dust, dirt, smoke and other particulates. When it senses those particulates it turns on to automatically clean the air. It senses particles as small as 3 Microns. Since it typically hangs above a tool or workbench the 2 LED lights will help light the project below. You can operate it in manual mode and control three speeds... 1750, 1300 & 880 CFM. At top speed you can clean the air in a 20' x 20' x 8' shop in just under 2 minutes, or over 32 times an hour. In the manual mode you can also control the times to set it at 1 to 24 hours by the hour with the convenient remote control.

Add to cart Details
Out of stock

Delta Power Tools 37-071 6 Inch MIDI-Bench Jointer

$549.00
After nearly 90 years of expertise in the woodworking business, DELTA Power Equipment Corporation (DELTA PEC) has become one of the most revered brands in woodworking tools today. DELTA Power Equipment Corporation focuses on innovations to help the woodworker create masterpieces easier and with more precision. The company designs, manufactures and distributes a variety of stationary woodworking tools including electric table saws, band saws, radial arm saws, scroll saws, drilling machines, jointers, planers, mortisers, lathes, grinders and dust collectors for the professional and advanced woodworking markets. Motor: 12 A, 120V, 1 Phase, 60 Hz, Universal
- Durable cast iron construction increases weight providing stability and reducing vibration
- Precision-machining of the table and fence ensures long term accuracy
- Heavy duty, cast iron fence support system for accurate jointing
- Simple fence adjust system with adjustable positive stops at90 and 45 in and out
- Up to 1/8 in. depth of cut
Details
Saw Trax Mid Fence

$549.00

The Mid Fence is the most popular accessory for boththe Saw Trax Full Size and Compact Panel Saws! Allows user to cut smaller pieces at waist level. Features all steel construction with a powder coated finish. Shelf is easily removed for processing full sheets. Fully adjustable and sold as a pair (left side and right side).

Add to cart Details
Saw Trax Floating Router Plate Panel Saw

$549.00
The Floating Router Insert is compatible with any current model Saw Trax brand Panel Saw.
- Floating platform generates uniform dados even on bowed or twisted material.
- Perfect for V grooving ACM Panels! Make your own dimensional displays and architectural elements!
- Fits on all current Saw Trax models.
- Universal design accommodates most router motors. Porter cable 892 router recommended.
- This set up allow the router to follow the contours of the sheet, giving consistent dado even on bowed or warped material.
- Router not included
Add to cart Details
Out of stock

MODEL 2875XL SHOP STYLE MITER SAW INCLUDING STOP SYSTEM–36″ WIDTH

$549.90
Rousseau shop style miter saw with stop system. Designed to fit saws with wider bases & sliding back. Easy folding-down wings for confined spaces.
MODEL 2875-XL FEATURES
- 36” x 19¼” Platform
- Designed To Fit Saws With Wider Bases & Sliding Back Fences
- Sturdy All-Steel Construction
- Easy Fold-Down Wings For Confined Spaces
- Powder Coated Finish
- Includes Stop System On Left Side
Details
Out of stock

RIKON Power Tools 50-122 6″ x 48″ Belt / 10″ Disc Sander

$549.95
The 6” x 48” Belt / 10” Disc Sander with Stand offers woodworkers the same belt and disc sizes and operating features as the #50-120, but, has a more powerful motor, re-designed base of sturdy, heavy gauge sheet steel, higher positioned disc location, cast aluminum disc table with patented rack & pinion table angle-setting handle system, and it includes a steel stand.
- Cast Iron & Steel Construction
- Belt Size 6″ x 48″
- Belt Tilts 0 – 90°
- 10″ Disc Diameter
- Includes: Steel Stand, Work Support Table, Miter Gauge, HEX Wrenches, Convenient Carrying Handles, 1 – 80 Grit Disc and 1 – 80 Grit Belt
Details
Sale!

Out of stock

Jet 713000 Filtration System Model AFS1000C NEW

Original price was: $649.99.Current price is: $549.99.
Introducing New Auto Dust Sensing Technology

The AFS1000C, when in auto mode, adjusts fan speed based on air quality

Auto-cleaning technology enables AFS unit to run only when dust is detected

Molded footing allows air flow under unit for when on a work bench.

Fan speed can be set in auto mode, or adjusted, from the control panel or the RF remote

Six speeds allow for precise adjustment
Details
General 10-030 DAS M1 Dual Switch Dust Collectors 120V 1Phase

$549.99

1HP Dual Action Switch Commercial Dust Collector with 1 Micron Canister (120V 1Phase)

This general dust collector is a high quality collector that will meet your dust management needs and applications. Simply plug your tool into the DC and the DC will turn on and off with the tool. Designed for industrial applications with a continuous duty rating. The motor is totally enclosed, fan cooled and permanently lubricated. Intake screen prevents larger pieces from jamming in the impeller. Innovative designed to be portable and mobile on four heavy duty swivel casters. 5" heavy-duty PVC hose between body of fan and collector. It's user friendly and can move around your shop at great ease. Quick-release bag clamps with metal straps. The safety lock-out switch with removable key, helps prevent unauthorized use. The precision aluminum spin-balanced impeller for smooth operation and minimal noise. Includes reusable clear plastic collector bag and washable, extra fine 1 micron filter bag. 6-5/32" static pressure of water without bag. Electrical testing laboratory certified (ETL).

Add to cart Details
Out of stock

Fein MSF636-1 3.7 Amp 6-Inch Random Orbit Sander with Vacuum Adaptor

$550.00
- Extremely powerful 6" 8800rpm random orbit sander with ideal dust extraction for all surfaces
- A particularly wide eccentric travel produces outstanding performance on any surface
- Item is manufactured in Germany
- Fastest OPM of any random orbit sander on market
- 380 watt 7500 RPM
- 8-hole hook & loop
- Reduces sanding time by 30%
- Direct dust collection through pad
Details
Out of stock

Jet 32″ x 24″ Cast Iron Table

$552.86
- Precision machined cast iron construction
- 88 pound table creates solid work surface for all routing applications
- Large table footprint with space for all routing applications
Details
Delta Power Tools 22-555 13 In Portable Thickness Planer

$569.99
After nearly 90 years of expertise in the woodworking business, DELTA Power Equipment Corporation (DELTA PEC) has become one of the most revered brands in woodworking tools today. DELTA Power Equipment Corporation focuses on innovations to help the woodworker create masterpieces easier and with more precision. The company designs, manufactures and distributes a variety of stationary woodworking tools including electric table saws, band saws, radial arm saws, scroll saws, drilling machines, jointers, planers, mortisers, lathes, grinders and dust collectors for the professional and advanced woodworking markets.
- Powerful 15A motor capable of handling the demands of a small shop
- Four column design provides excellent stability for smooth, accurate planing over many years of use
- Quick-change knife system with dual edge disposable knives lets you change knives without difficult to use alignment jigs
- Adjustable infeed and outfeed tables to better support long pieces and reduce snipe
- Reversible dust port allows you to collect chips from the right or left side of planer
Add to cart Details

MODEL 2875-XL FEATURES