Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com

Shop

/Shop
  • Out of stock

    Ashley Hearth AW1820E 1,200 Sq. Ft. Wood Stove Insert , Black

    $1,995.00

    1,200 Sq. Ft. Wood Stove Insert

    The Ashley Hearth Products AW1820E is an air tight fireplace insert that will greatly improve the efficiency of your fireplace. The AW1820E fireplace insert meets the stringent requirements of the EPA “Step 2” 2020 Certification Guidelines. With a heavy cast iron door with a cool touch wood handle, and an air washed ceramic glass that allows a magnificent view of the burning fire, it will be a beautiful addition to your existing hearth. It comes with the hearth surround to fully enclose the existing fireplace, and is equipped with a spring loaded automatic adjustment to make installation a breeze. The Ashley AW1820E model replaces the previous Vogelzang model TR004 Colonial fireplace insert and the US Stove Company model 2200IE insert.
    default.jobtemplate.hls.m3u8
    Details
  • Out of stock

    King 2,200 Sq Ft Pellet Stove with 130 lb Hopper

    $1,995.00

    The KP130 is a fully automated pellet stove with auto ignition and easy to use electronic controls. It comes with an exhaust blower for negative draft that pulls flue products through and out to completely eliminate smoke spillage, an automatic circulation blower to spread heat evenly and an optional fresh air intake that is sold separately. Its durable yet sleek design is built for years of high performance and to blend nicely with any room setting and designed to provide your home with the desired warmth even in the coldest of climates. The KP130 burns a carbon-neutral, green fuel, considered environmentally friendly. These fuels are clean, easy to handle, store, and are, otherwise, waste products from the timber and agricultural industries. Heating your home with this unit insures that you are doing your part to conserve our nation’s primary energy resources. Pellet heaters work by using a software driven control board to precisely deliver a pre-determined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home.

    default.jobtemplate.hls.m3u8

    Details
  • Out of stock

    Shop Fox M1118—48″ Pan and Box Brake

    $1,995.95

    Specifications

    • Max. workpiece width: 48"
    • Bending capacity at full width: 18 ga. mild steel
    • Bending capacity at half width: 16 ga. mild steel
    • Brakes: 0-135°
    • Box fingers: 2" (x5), 3" (x6), 4" (x5)
    • Footprint: 52" x 12-1/2"
    • Max. height of pan/box brake sides: 2-1/2"
    • Brake steel with hardened edge
    • Approximate shipping weight: 383 lbs
    Details

  • Laguna c|flux 1 Model Number: MDCCF15110 1.5hp 110v Cyclone

    $1,999.00

    The c|flux series sets a new standard for cyclones. The horizontal chute is designed to maximize airflow while improving CFM. All shapes and dimensions has been reevaluated to optimize performance.

    The c|flux:1 comes standard with a 1 micron canister providing filtration of 99.7% of particles 1 micron or larger & features 48 sq/ft. of polyester spun bond pleated filter to ensure maximum airflow. 270° manual clean comes standard.

    The c|flux series can be equipped with an optional auto clean kit either at time of purchase or as an add-on later. The auto clean kit includes a smart sensor that detects a drop in air pressure indicating the filter is getting clogged and automatically activates the cleaning procedure.

    Ingenious lift system quickly moves the drum off the floor and seals against the drum lid, avoiding the need for a flex hose. This design allows for much better portability as you are not forcing 4 wheels into the floor while pushing the unit.

    Add to cart Details

  • Laguna 14|bx Bandsaw 110 Volt MBAND14BX110-175

    $1,999.00
    The Laguna 14|bx is leading the evolution of bandsaws. World class fit, finish & design, heavy gauge solid steel frame & equipped with an ingenious patent pending disc-brake that shuts off power automatically is just the beginning. The 14|bx has been designed to run smoother with almost no detectible vibration improving overall performance. Magnetic on/off switch & dual mounting positions for the optional Pro Light System comes standard.
    Add to cart Details
  • Out of stock

    Simpson Cleaning PS3835 3800 PSI at 3.5 GPM Gas Pressure Washer Powered by HONDA GX270

    $1,999.90
    The SIMPSON PowerShot 3800 PSI at 3.5 GPM is ideal for prosumers and professionals alike. This is a powerful option for deep outdoor cleaning, jobsite use, equipment upkeep and facility or fleet maintenance. This product is engineered to meet the demands of a cleaning professional. The PS3835 features a commercial HONDA GX270 engine, reliable AAA industrial triplex pump, 50-ft kink & abrasion resistant hose, ergonomic spray gun and 5 Quick-connect nozzles. Designed to meet the rigorous demands of the cleaning professional, the SIMPSON PowerShot Series frame is crafted of solid steel making it powerful, yet extremely compact, easy to transport, set-up and load. Perfect for contractors who specialize in deck cleaning, wood restoration, paint preparation, graffiti removal and all other professional cleaning services. The SIMPSON PowerShot Series designed for optimum performance in the harshest environments. 3 year limited HONDA commercial engine, 5 year limited pump, 10 year limited frame and 90 day accessory
    Details

  • 506601, LAGUNA JX|6 QuadTec: I Jointer

    $1,999.99

    506601, LAGUNA TOOLS 6IN, SHEARTECH II JOINTER

    The Laguna JX|6 QuadTec I is loaded with highly desirable features to make jointing safer and more enjoyable.   Features:
    • Parallelogram Table Adjustments – Table depth adjustments travel along an arc to keep the same distance to the cutterhead through its travel
    • Emergency “Knee-Stop” – The new knee stop uses a body-length bar at knee height to shut off the JX jointer. This important safety feature allows the machine operator to stop the machine quickly at any position along the front of the machine while keeping hands on the workpiece
    • New Ergonomic Machine Body – The new JX Series machine body has been redesigned with a “toe-kick” to allow the user to position themself closer to the machine tables and to move safer and easier along the length of the machine
    • In-feed Support Roller – Infeed tables are now fitted with pull out support roller to help support longer materials
    • QuadTec I Cutterhead – The all-new QuadTec I cuttherhead comes as standard equipment on the new JX-6. The QuadTec I produces an amazing surface finish on all woods including difficult The QuadTec I uses 4-sided carbide insert knives that are quieter and much more durable compared to straight HSS knives. The 4-sided knives can be rotated for a new cutting edge without the need for a knife setting jig
    • Built-In Wheels – No need to purchase a separate mobility kit
    • Cast-Iron Tables and Fence
     

    THE BRAND NEW QUADTEC:I IS DESIGNED TO OFFER AN AMAZING FINISH ON THE MOST DIFFICULT SPECIES OF WOOD

    The inserts are solid carbide (14x14x2mm) so they can be rotated 4x to extend the already longer life Compared to HSS. The inserts are mounted on a straight line requiring less machining thus saving cost. The QuadTec: I is also quieter than conventional straight knives. Each insert is indexed requiring no jig when rotating or replacing.   Specifications:
    • Motor: 110V 1.5HP 1 Phase 60hz/13 Amp
    • CSA: Yes
    • Bed Size: 60″ x 6″
    • Infeed Table Pull-Out Extension: 8″
    • Rabbetting Capacity: 1/2″
    • Fence Size: 29″ x 3-3/4″ Cast Iron
    • Fence Tilt: ±45/90°
    • Max. Depth Of Cut: 1/8″
    • Table Height From Floor: 31″
    • Safety Bar Shut-Off: Yes
    • Wheels Built-In: Yes
    • Bracket To Mount Light: No
    • 110V Outlet For Light: No
    • Bracket To Mount Feeder: No
    • Dust Port Diameter: 4″
    • Cutterhead Insert #: 12 x 4-Sided Carbide, 4-Row
    • Cutterhead RPM: 5500
    • Cutterhead Diameter: 2-1/2″
    • Bed Adjustment: Parallelogram
    • Dimensions Set Up (Approx): 63″ x 22″
    • Dimensions Shipping: 65″ x 22″ x 13″ + 31″ x 16″ x 27″
    • Net/Ship Weight: 161/174 Lbs + 88/94 Lbs (2 Boxes)
    Add to cart Details
  • Out of stock

    Baileigh RDB-050 Manual Tube Bender

    $1,999.99
    Item Number RDB-050
    Minimum CLR 3"
    Minimum OD .75"
    Mild Steel Solid Rod 1"
    Mild Steel Pipe Schedule 40 Call for Details
    Mild Steel Round Tube Wall 2.5" (.120)
    Stainless Steel Pipe Schedule 40 Call for Details
    Stainless Steel Round Tube Wall 2" (.120)
    Chromolly Round Tube Wall 2" (.120)
    Aluminum Pipe Sch. 40 Call for Details
    Aluminum Round Tube Wall 2.5" (.120)
    Max. Clr 7"
    Power Manual
    Shipping Weight 290lbs
    Special Notes tooling not included, contact Baileigh at 920-684-4990 for correct sizing.
    Things to Know Before Purchase All capacities based on A53 grade A (mild steel) 48,000 psi tensile materials; heavy wall and high tensile materials may reduce machine capacity. Consult Baileigh Industrial to review material specifications.
    Shipping Dimensions (Inches) 36x36x18
    Details

  • SJO-66737K Sjobergs Scandi Plus 1425 with SM03 Storage Cabinet

    $2,035.00
    SJOBERGS of Sweden has been manufacturing top quality workbenches for over 90 years. Their entire product line of workbenches is designed to meet the needs of a modern day woodworker and to take advantage of the latest manufacturing techniques.
    • Includes SM03 Storage Cabinet
    • Advanced Swedish design; 100% European Beech
    • Double row of round 3/4" bench dogs working from both vises
    • Includes 4 bench dogs w/ side springs that remain at the height required or drop flush in the dog ho
    • Overall size is 35-1/2" high x 57" long x 23" wide
    Add to cart Details
  • Out of stock

    Rikon Cyclone Dust Collector 60-1750 1.75 HP 900 CFM

    $2,045.00

    Rikon Cyclone Dust Collector 1.75 HP 900 CFM

    The 1.75 horsepower cyclone dust collector has a newly designed impeller that reduces the stress on the motor while meeting or exceeding air flow compared to other cyclones in their class. This reduced stress allows the motor to operate cooler, more efficient and has up to 33% less cost to operate. This improves the longevity of the motor. Equipped with remote control start functions that operate on bluetooth RF band technology which increases range and ability to operate the unit from a different room. This unit has 900 CFM. Two four inch dust ports. Built in casters for mobility. Large plastic bag liners are used for the dust containment barrel.

    FEATURES

    1.75 HP - 900 CFM
    2 - 4 In. dust ports
    Includes casters for easy mobility around the shop
    More efficient motor save up to 33% cost to operate
    Quick release for easy cleaning
    Single Phase
    60 Hz., 3450 RPM, TEFC Motor

    SPECIFICATIONS

    Rikon stock number:
    60-1750
    Air Volume (CFM)
    900
    Assembled Depth (in)
    40
    Assembled Weight (lbs)
    220
    Assembled Width (in)
    30
    Assembly Required
    Partial
    Automatic Shut-Off
    No
    Brand / Model Compatibility
    Rikon
    Country of Origin
    China
    CSA Certified
    No
    Decibel Rating (dB)
    81.6
    ETL Listed
    Yes
    globalTradeItemNumber (GTIN)
    00814463015200
    Height (in)
    60
    Horsepower (hp)
    1.75
    Material
    Metal
    Package Contents
    Dust Containment System
    Package Depth
    40
    Package Height
    60
    Package Weight
    220
    Recommended Safety Equipment
    Safety Glasses
    Stand Included
    Yes
    UL Listed
    No
    UPC
    814463015200
    Vacuum Attachable
    No
    Voltage
    115
    Details
  • Out of stock

    Jet 414559 HVBS-712 Bandsaw, 7 x 12″

    $2,049.00
    The JET HVBS-712 Horizontal/Vertical Metalworking Bandsaw has everything any operator needs to tackle even the toughest job. JET increased the width and height of the stand and added new features that exceed expectations. The HVBS-712 is another innovative JET product packed with features you’ve come to expect.
    Details
  • Out of stock

    JET 718200K Model JJ-8CS 8″ 2 Hp Jointer 230 Volt 1 Phase

    $2,079.99
    It’s time to skip the hand tools and graduate to the JET JWJ-8CS 8” long bed jointer. Its 2HP motor runs quietly and smoothly. Its front-mounted table adjustment handwheels make quick, easy and accurate corrections. The two-way tilting fence with positive stops at 45° and 90° makes bevel operations smooth. Extra-long heavy-duty cast iron infeed and outfeed tables with precision-machined finish allow jointing of longer boards without tipping. Best of all, it comes by JET's industry-leading 5 year warranty.
    Details
© 2015 CT Power Tools | All Rights Reserved
Facebook