The 13″ Combination Brush/Drum is the answer to your production bottleneck. Developed with mouldings in mind, this versatile sander can tackle every step in your finishing process, from sanding raw wood to sanding in between coats of stain or primer. Read about other applications below.
This model features a 1-3/4 HP motor, and can handle stock up to 4″ thick, or as thin as 1/32″. It can also be equipped with an optional sanding drum for surface sanding.
- Raw Wood Sanding | White Wood Sanding
- Break sharp edges
- Open grain for even finish absorption
- Blend out minor defects
- Sealer Sanding | Primer Sanding | Scuff Sanding
- Removes raised fibers and grain (denib/defuzz)
- Degloss previously finished wood
- Clean reclaimed wood
- Wire Brushing
- Distress (weathered/Southwest finish)
- Pull out soft grain to create textured surface
Sanding Capacity: Maximum Width (in): 13 Minimum Length (in): 9 Maximum Thickness (in): 4, varies with drum/brush style Minimum Thickness (in): 1/32*
Dimensions (in): 35L x 42W x 44H
Drum (in): 5 x 13 extruded aluminum.
Brush (in): 6-8 typical diameter.
Speed: ranged variable RPM, 400-1200
Dust Hood: 1- 4″ port, hinged at back, 600 CFM min. recommended
Conveyor Motor: 43 in.-lb. torque, ranged variable, 0-10 FPM
Drive Motor (TEFC): 1-3/4 HP
Power Requirements: 110 Volt, 20 amp service
Shipping Weight (lbs): 300 (approx., varies based on how equipped)
