-
Presenting the "Original" Dust Bee Gone Nuisance Dust Mask. Stop throwing away your money on uncomfortable disposable dust masks. This "must have" Dust Bee Gone Nuisance Dust Mask fits perfectly to the shape of your face and it lasts for years! (Our test group is still using their original masks with continuous use for 4-1/2 years) • Forms to all face shapes (even works with beards). • Adjustable nose piece shapes easily to seal dust out. • Heavy 3/4" elastic with a buckle provides strength and the top strap is easily adjusted. • Hook and loop fastening on bottom strap provides maximum comfort and ease of closure. • Hand washable and may be disinfected for use by more than one person. • Easy to breathe through and talk through. Perfect for Teachers, Demonstrators. • Effective down to 3 microns. Not NIOSH or OSHA approved. Size Information • Youth (aqua) fits Children to age 6. • Medium (blue) fits Mens neck size 16 and under (This size fits most women and children over age 6). • Large (maroon) Mens neck size 16 to 18 1/2. • XLarge (green) Mens neck size 18 1/2 to 24 You are purchasing one Medium (blue) mens mask. -
Out of stock
The K Body REVOlution (KRE) was designed to clamp at 90 degrees to the rail with very large clamping surfaces. The ergonomic two part handle includes a steel socket that allows one to apply clamping force using a hex key. While this helpful feature was designed for ease of clamping, it does allow one to provide more clamping force and is particularly helpful for those with wrist strength issues. The operating jaw has undergone some evolutionary changes as well. Position it where you want and start clamping. The easy set-up allows one to position the operating jaw where you want and, it will stay put during set up. The new BESSEY K Body REVOlution offers a load limit of an everyday clamping force of 1700 lbs and spreading capacity of 10 ½" – 36 ½"- Heavy duty premium parallel clamping tool rated at 1700 lbs. of nominal clamping force
- German high-quality profiled steel rail Stock
- Jaws clamp at accurate 90° angles
- Easily converts to spreader without tools
- Many accessories and replacement parts available
- Large parallel clamping surfaces
- Replaceable protective pads on the jaws
- 6 mm hex socket on end of handle
- Max. torque 17 Nm (12.5 lb-ft
-
Perfectly kiln dried. Beautiful grain.Two sides sanded to 1/2" thickness. Tolerance +/- 1/16"Please note that the pieces shipped will be of similar quality.You are purchasing two pieces. -
Recommended for use with sprays and vapors from pesticides, coatings and sealants. Fits 3MTM 6000 Series and 7500 Series half face piece respirators.
Designed to be compatible with your 3M™ Household Multi-Purpose Respirator 65021, the 3M™ 60921Performance Cartridge helps filter out particles and odors. These replacement combination cartridges/filters are easy to install. When it is time to replace the cartridges, replace them with the trusted protection of 3M™ 60921 Performance Cartridges for Household Multi-Purpose Respirator.
Highlights
- NIOSH-APPROVED OV CARTRIDGE WITH P100 FILTER filters at least 99.97% of solids and liquid aerosols as well as certain organic vapors
- Filter is OIL PROOF (Use according to manufacturer’s time use restrictions when oil aerosols are present)
- EASY-TO-ATTACH DESIGN
- USE FOR ODOR REDUCTION and with certain non-harmful sprays/vapors from latex and oil-based paints, stains, varnishes, coatings and sealants
- ALSO HELPS PROTECT against certain pesticides*. *Refer to Pesticide Product Label for Respirator Guidance or call 3M at 1-800-243-4630 or In Canada, call 1-800-267-4414
- APPROVED FOR use with 3M™ 6000, 6500 and 7500 series facepieces
- For help in determining when to change your cartridge visit 3M.com/ServiceLife
- Facepiece included
- Cartridge Color: magenta and black
- Package Contents:
- DIY/Home Use: Use ONLY in NON-HARMFUL environments
- Occupational/Hazardous Use: Use under a government regulated (e.g. OSHA) respiratory protection program
-
Perfectly kiln dried. Beautiful grain.Two sides sanded to 3/4" thicknessPlease note that the pieces shipped will be of similar quality.Tolerance +/- 1/16"
-
Out of stock
Keep your JET equipment looking sharp with this touch-up paint, an exact color match for your tool. Easily covers bumps and nicks in the finish. Always trust genuine JET replacement and maintenance parts. -
-
- Fits JET 22-44 Sanders
- 3 wraps per box
-
- Fits JET 22-44 Sanders
- 3 wraps per box
-
IVY Classic Non-Magnetic Spring Nut Setters are designed to securely hold stainless steel hex head screws and nuts using a ball with spring retention The Alloy-Steel body is designed to withstand the high torque (rotational force) of impact drivers, Impact Plus (Registered Trademark). Our lobular design reduces the stripping of the corners of the nut, fasteners are driven on their flat sides instead of their corners. IVY Classic Industries manufactures an extensive line of nut setters in a variety of sizes and lengths. IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. -
Out of stock
Temp. Range Above 40 Degrees F, Curing Time 24 hrs., Application Time 5 min., VOC Content 3.0 g/L, Viscosity 12, 000cP, Tensile Strength 329 psi, Substrates Wood, Particleboard, MDF And Other Porous Substrates To Synthetic Materials Such As Melamine, Vinyl And HPL As Well As Metals, Fast Setting, Dries Clear, Long Open Time, Fast Initial Tack, Woodworking ' -
Out of stock
Allows 15 minutes of open time. Develops a bond stronger than the wood itself. Provides a translucent glue line. Titebond II is also weatherproof and ideal for exterior applications. -
Out of stock
-
BBPF-14-4-145, Laguna Proforce 1/4" X 4 TPI X 145" Bandsaw Blade Direct from Sweden, Lagunass' Proforce blade stock are the finest on the market. You will immediately notice the difference in quality and precision with the new Proforce. The Proforce is an affordable blade without compromising the cut. Every blade is hand welded on a state-of-the-art welder by one of their skilled professionals. Individually inspected for quality control and backed by a 1 year manufacturers warranty, the Proforce is the blade of the future. -
Out of stock
- Adjustable Clamping Force - the integrated clamping force adjustment screw can be used to create an actually applied clamping force from 25 to 550 lbs. (max holding capacity 700 lbs.)
- The BESSEY Auto-Adjust Toggle Clamp automatically adjusts to variations in work piece dimensions while maintaining constant clamping force
- No more time-consuming manual adjustment of the spindle height to maintain safe and correct clamping force
- One BESSEY Auto-Adjust Toggle Clamp can replace a range of competitive clamps
- A removable non-marring plastic cap is included on the steel pressure pads
- The large (2 1/4” by 2 1/2”) flanged base is designed for use with 1/4” or M6 fasteners
- Extra large 1” x 2 1/8” cushion grip handle offers greater user comfort and ease of op
-
Out of stock
-
Out of stock
The Bessey Portable Mini Vise Clamp is ideal for holding round, rectangular and odd shaped objects.It has glue resistant jaws and can be clamped to a work surface with Bessey TK 6 table clamps.Bessey TK6 clamps are included w/ S10 -
Out of stock
-
BBPF-14-4-145, Laguna Proforce 1/4" X 4 TPI X 145" Bandsaw Blade Direct from Sweden, Lagunas' Proforce blade stock are the finest on the market. You will immediately notice the difference in quality and precision with the new Proforce. The Proforce is an affordable blade without compromising the cut. Every blade is hand welded on a state-of-the-art welder by one of their skilled professionals. Individually inspected for quality control and backed by a 1 year manufacturers warranty, the Proforce is the blade of the future.
-
Modern, low profile ergonomic half mask comes with twin P3 HEPAC pleated filters already fitted. Grille covers the entire filter surface area deflecting particulates & moisture away. Material is odor-free and non-allergenic, with latex and silicone-free face seals. Less clogging pressure and inward leakage.•Highest filtration efficiency at 0.3 microns - 99.999% offering protection against wood dust, silica dust, weld fumes, asbestos, oils, mists, aerosols. •Lowest breathing resistance of any half mask on the market for maximum comfort & less condensation build-up. •Sleek unobtrusive design to accommodate visors, helmets, spectacles/goggles & other PPE. •Large downward facing exhaust for non-misting or steaming of goggles. •Latex & silicone-free TPE medical grade face seal so it can be worn for 8+ hours•Assigned Protection Factor:APF20Specify size at check out. Medium/Large Small/Medium Case & replacement filters sold separately. -
BSF-58-34-5234 Laguna Shear force 5/8" 3-4 TPI x 52 3/4 " Bandsaw Blade Dimensions: 5/8" X 3-4 TPI X 52 3/4" -
GrabberPRO is the ultimate adjustable push block. Ideal for use on table saws, router tables, jointers, and even band saws. Designed with control, precision, and safety in mind! The multi-leg design allows the GrabberPro to pass over both sides of a saw blade, keeping contact with the workpiece and helping reduce kickback. The inward, downward, and forward pressure provide superior control all the way through the cut, keeping you and your fingers protected. GrabberPRO is a must-have for every woodworker, whether you’re a DIY-er or a Pro! Adjustable Multi-Leg Design- 4 Adjustable and interchangeable legs let you customize the GrabberPro to suit your job
- Includes 1”, 1/2”, 1/4” and 1/8” Legs
- Cut clean, precise strips as small as 1/8” thick.
- Helps reduce kickback by maintaining contact on both sides of the blade through your cut
- Elevated base keeps hands further away from cutting surface for increased safety
- Handle design keeps constant downward, inward, and forward pressure on workpiece to safely finish cuts and prevent binding or kickback.
- Provides superior control and maximum grip, while keeping your hands angled away from the cutting tool
- Angled support foot can be lowered to support the GrabberPro for extra tall or thin cuts
- Maintains balanced, even contact with your workpiece
- Non-marring, TPE material provides maximum strength to safely hold your workpiece in place
- Easy to clean surface ensures your GrabberPRO won’t slip
- The Retractable Heel provides extra forward control during cuts
- Helps prevent tear-out
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product - 4 Adjustable and interchangeable legs let you customize the GrabberPro to suit your job
-
Direct from Sweden, Lagunas' Proforce blade stock are the finest on the market. You will immediately notice the difference in quality and precision with the new Proforce. The Proforce is an affordable blade without compromising the cut. Every blade is hand welded on a state-of-the-art welder by one of their skilled professionals. Individually inspected for quality control and backed by a 1 year manufacturers warranty, the Proforce is the blade of the future.
-
Out of stock
Fits Jet cyclones:717530 3 HP717520 2 HP -
You are purchasing one piece of Quarter Sawn White Oak size: 3/4" x 3" x 48" Photo used is for demonstration purposes only. Please feel free to contact should the need arise. -
5 Replacement bags
22 Gallon capacity
Dimensions 15-3/4" x 23-1/2"
Fits most Laguna C|Flux:1 Cyclone, Laguna C|Flux:2 Cyclone, Laguna C|Flux:3 Cyclone, Laguna P|Flux:1 Cyclone, Laguna P|Flux:2 Cyclone, Laguna P|Flux:3 Cyclone dust collectors.
-
Direct from Sweden, Lagunas' Proforce blade stock are the finest on the market. You will immediately notice the difference in quality and precision with the new Proforce. The Proforce is an affordable blade without compromising the cut. Every blade is hand welded on a state-of-the-art welder by one of their skilled professionals. Individually inspected for quality control and backed by a 1 year manufacturers warranty, the Proforce is the blade of the future.
-
Direct from Sweden, Lagunas' Proforce blade stock are the finest on the market. You will immediately notice the difference in quality and precision with the new Proforce. The Proforce is an affordable blade without compromising the cut. Every blade is hand welded on a state-of-the-art welder by one of their skilled professionals. Individually inspected for quality control and backed by a 1 year manufacturers warranty, the Proforce is the blade of the future.
-
BBPF-14-4-115, Laguna Proforce 1/4" 4 TPI x 115" Bandsaw Blade Direct from Sweden, Lagunas' Proforce blade stock is the finest on the market. You will immediately notice the difference in quality and precision with the new Proforce. The Proforce is an affordable blade without compromising the cut. Every blade is hand welded on a state-of-the-art welder by one of their skilled professionals.Individually inspected for quality control and backed by a 1 year manufacturers warranty, the Proforce is the blade of the future. Dimensions: 1/4" X 4 TPI X 115"
-
Perfectly kiln dried. Beautiful grain.Two sides sanded to 3/4" thicknessPlease note that the pieces shipped will be of similar quality.Tolerance +/- 1/16"
-
Perfectly kiln dried. Beautiful grain.Two sides sanded to 3/4" thicknessPlease note that the pieces shipped will be of similar quality.Tolerance +/- 1/16" -
Out of stock
-
Out of stock
-
Direct from Sweden, Lagunas' Proforce blade stock are the finest on the market. You will immediately notice the difference in quality and precision with the new Proforce. The Proforce is an affordable blade without compromising the cut. Every blade is hand welded on a state-of-the-art welder by one of their skilled professionals. Individually inspected for quality control and backed by a 1 year manufacturers warranty, the Proforce is the blade of the future.
-
Out of stock
Titebond II premium wood glue is the only leading brand, one-part wood glue that passes the ansi type II water-resistance specification. Titebond II premium provides a strong initial tack, fast speed of set, superior strength and excellent sandability. It is FDA approved for indirect food contact (cutting boards) and is ideal for radio frequency (R-F) gluing systems. -
Out of stock
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com
