-
Out of stock
-
Designed for production shops, this 37" sander has what it takes to get those big jobs done—fast. Sand boards and panels up to 4" thick and 36-1/2" wide, using two different abrasive grits in the same pass with the dual 6" sanding drums. Feed speed is adjustable from 6 to 18 FPM. The variable-speed knob conveyor adjustment and amp meter make it easy to monitor the sanding load to ensure maximum efficiency. Other great features include a hinged hood, emergency stop bar, pedestal-mounted controls, four 4" dust ports, and a 10 HP, 240V, single-phase motor. Certified to CSA and UL standards. -
Out of stock
This manual brake’s top beam and support trusses—made of fully-welded steel plate—will keep bends accurate at full capacity.- Bends 12 gauge (or lighter) mild steel.
- 8 feet (96”) long.
- Maximum bend angle of 135°.
- Blade, precisely machined to exacting tolerances, produces the tightest possible bend radius.
- Steel floor stand sets the beam at a comfortable working height and stabilizes the machine during the bending process.
- Made from the finest quality components, including heavy cast iron clamp handles, to maintain rigidity.
- Comes standard with a stop rod, so you can easily make repeated parts and bends.
- Plate steel bending leaf, with integrated side pivots, uses bushings to help the machine last for many years and wear well.
- 2 heavy duty counterweights allow you to effortlessly bend at maximum capacity.
-
Out of stock
The HB-12016 sheet metal hand brake can fit an 8-foot sheet corner to corner, opening up wider project possibilities.- Sheet metal hand brake bends16 gauge mild steel across its full 10-foot length (120”).
- Maximum bend angle of 135°.
- Top beam and bending leaf made from fully-welded plate steelprevents this hand sheet metal bender from flexing and ensures accurate bends.
- Steel support rods stabilize the machine.
- 2 heavy duty counterweights assist the operator and the reduce effort of bending full sheets.
- Comes standard with a stop rod to help you easily make repeatable bends for production runs.
- Main pivots, supports, and clamp levers are made from high-quality cast iron, then machined to exacting tolerances.
- Fully-welded steel stand can bolt to the floor for even more stability.
-
Out of stock
This 6-foot box brake offers a happy medium between our 4-foot BB-4812 and our 8-foot BB-9612. With a welded steel frame, the BB-7212 offers years of hassle-free productivity.- Bends 12 gauge mild steel over its full 6-foot (72”) length.
- Maximum bend angle of 135°.
- 2 counterbalance weights make it easy to bend at maximum capacity and reduce operator strain.
- Electro-welded and truss-supported steel frame prevents distortion or twisting and produces high-quality bends.
- Comes standard with 17 hardened fingers of varying sizes (6 fingers of 3", 3 of 4", 6 of 5", and 2 of 6") .
- 3-piece finger design allows for a 6” box depth.
- You can set up a long straight brake or a segmented one for boxes or pans.
- Heavy-duty steel floor stand puts the beam at optimal working height.
-
Out of stock
This box brake can bend metal along its 10-foot width without twisting. You can bend 4 x 8 sheets at 45°, perfect for adding a stiffening rib to support long duct pieces.- Maximum capacity of 14 gauge mild steel and 18 gauge stainless steel.
- 10-foot (120”) length enables your shop to take on a wide range of projects.
- Bends up to 135°.
- Heavy-duty truss rods support the apron to reduce flex on maximum capacity bends.
- Electro-welded all-steel framework keeps this metal brake accurate over decades of daily use at full capacity.
- 26 fingers of varying sizes (6 fingers of 3", 4 of 4", 10 of 5", 6 of 6") allow you to bend boxes and pans up to 6” deep.
- You can set up the individual hardened fingers for straight bending or box and pan configurations.
- Apron shafts ride in precise oilable bearings, maintaining tight bend tolerances and minimizing operator fatigue.
- 2 massive counterweights make it easy to bend at maximum capacity and reduce physical strain.
- Massively-built sheet metal finger brake weighs in at almost 3500 lbs.
-
Door builders and cabinet shops will love the extra capacity of this 37" wide-belt sander. Available with 15 HP 3-phase sanding motors, these wide-belts are built for daily industrial use with features such as a heavy-duty steel cabinet, pneumatic belt oscillation, and a built-in air filter/regulator. The digital control pad automates table adjustments and is accurate to 0.005". Also, the variable-speed conveyor, adjustable oscillation controls, and adjustable graphite/felt platen easily allow the operator to find the perfect combination of settings to achieve soft, smooth finishes on all types of wood. -
Out of stock
With a fully automatic feeding, cutting and lifting cycle this saw steps productivity up to the next level. The hydraulic vise uses a built-in power feed system to feed material to the desired length determined by a fine tunable sensor. Simply set your cut length, set the desired number of cuts and blade speed, load your material, and press start-the G0886 does the rest! With an impressive 12" x 14" capacity and powerful 3 HP, 3-phase motor, the G0886 has the capabilities to process some serious material. The workhorse also features a built-in 6 1/2 gallon coolant tank and full wrap catch basin to ensure coolant stays where it belongs. Perfect for cutting heavy steel or aluminum stock, you can quick and easily adjust downward feed rate to help maximize blade life. This saw truly does it all! Note: Stock must be at least 1" tall for auto feed to work. -
Out of stock
10 Horsepower 3-Phase 24" Wide Belt Wood Sander with Pneumatic Oscillation Control
These machines were developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. This collaboration resulted in the introduction of the G9962Z & G9962ZX, which have become the "staple" of the guitar building industry. The main features that enable these sanders to process short pieces efficiently are the single drum and double infeed and outfeed pressure rollers positioned close to the drum. The result is a continuous downward pressure on extremely thin stock as short as 9", which is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of hard rubber to prevent distortion of thin stock while sanding. Features include digital read out, powered table elevation, variable speed conveyor, disc brake stopping system, pneumatic belt tracking, pneumatic belt oscillation, and separate motors for the drum, feed rollers, and table elevation. -
Out of stock
Description
Numeric control pad and digital readout provide the ultimate in precision. Other features include quick-change belt system with automatic belt tensioning, air-controlled automatic belt tracking system, motorized table elevation control, adjustable air-controlled belt oscillation system, and load meter. Certified to CSA and UL standards.Specifications
- Sanding motor: 10 HP, 220V, single-phase, 1725 RPM, 50A
- Feed motor: 1 HP, 220V, single-phase, 1725 RPM, 7A
- Elevation motor: 1/3 HP, 220V, single-phase, 1725 RPM, 3A
- Drum speed: 3550 FPM
- Drum diameter: 8"
- Feed rate: variable, 15–49 FPM
- Max. stock width: 24"
- Max. stock thickness: 6"
- Min. stock thickness: 1/8"
- Required air pressure: 75 PSI @ 7 CFM
- Sanding belt size: 25" x 60"
- Dust port: (2) 4"
- Emergency stop bar with brake
- Manual and motorized table elevation control
- Sanding load meter
- Digital readout and controls
- Made in an ISO 9001 factory
- Footprint: 39-1/4"W x 19-1/4"D
- Height with dust ports: 71"
- CSA certified meeting CSA C22.2 #105–1953 and UL 987–7 standards
- Approximate shipping weight: 1870 lbs.
California Proposition 65 Warning
-
Out of stock
G0603X 25" 15 HP 3-Phase Extreme Duty Planer w/ Helical Cutterhead
Precision planing with digital control.
The G0603X 25" 3-Phase Extreme Duty Planer has an incredible 15 HP motor to make quick work of those big planing jobs. The G0603X features a unique helical cutterhead with 170 inserts rotated at 15° for smooth shearing cuts - meaning you can say goodbye to tear-out - while having an ultra-quiet machine and a smoother finish. The digital controls to allow you to simply enter the thickness of the board you want or the amount you want to remove, which saves time and reduces waste. All controls are conveniently located. The segmented chip breaker leads directly into the dust hood with a 5” dust port to help ensure the work area stays as clear as possible. And because it's a Grizzly Extreme Series®, you can be assured that your machine will provide years of reliable service. Like all Grizzly planers, the G0603X comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0603X manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS:- Cutterhead motor: 15 HP, 220V/440V*, 3-phase, 37A/18.5A
- Table elevation motor: 1/2 HP, TEFC, 2.4A/1.2A
- Table size: 25" W x 57" L
- Maximum cutting width: 25"
- Maximum stock thickness: 9"
- Maximum cutting depth: 1/4"
- Minimum stock thickness: 1/4"
- Minimum stock length: 10"
- Feed rate: 20, 25 & 30 FPM
- Cutterhead: 6-row helical, 170 inserts
- Cutterhead speed: 4900 RPM
- Power transfer: Triple V-belt
- Overall size with infeed/outfeed tables: 60-1/4"H x 57-3/8"W x 54-3/8"D
- Approximate shipping weight: 2054 lbs.
- Segmented chip breaker
- Precision-ground cast-iron table
- 5" dust port
- Micro-adjustable table height
- Infeed roller is serrated steel
- Outfeed roller is finely finished steel
- Digitally controlled table elevation for extreme accuracy
- Adjustable bed rollers
- Easy access cutterhead
- 3-Speed (20,25,30) feed Rate
- Inch/metric readout
- Emergency stop button*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $250. Please contact Grizzly Technical Support at (570)546-9663 before placing your order.
-
Out of stock
The Grizzly Industrial G0445-24" 10 HP 3-Phase Platen Type Wide-Belt Sander machine was developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. The main features that enable it to process short pieces efficiently are the single drum and the double infeed and double outfeed pressure rollers that are tucked in closer to the drum. The result is that you have continuous downward pressure on extremely thin stock as short as 14" (G0582). That is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of harder rubber to prevent distortion of thin stock while sanding. The new platen model will sand stock as short as 9" (G0445). All of these models include features like digital read out, powered table elevation, four screw jacks for table support, variable speed, disc brake stopping system, dust proof photo electric eye/pneumatic control for belt oscillation, and separate motors for the drum, the feed rollers, and the table elevation.
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com