-
Out of stock
This air filtration system is setting new standards in clean air. With the smart technology the laser sensor continually scans the air in the room for dust, dirt, smoke and other particulates. When it senses those particulates it turns on to automatically clean the air. It senses particles as small as 3 Microns. Since it typically hangs above a tool or workbench the 2 LED lights will help light the project below. You can operate it in manual mode and control three speeds... 1189, 756 & 580 CFM. At top speed you can clean the air in a 20' x 20' x 8' shop in just under 3 minutes, or over 21 times an hour. In the manual mode you can also control the times to set it at 1 to 24 hours by the hour with the convenient remote control. -
- Anti-vibration system: Permanently safe, pleasant working conditions with minimum vibrations and outstanding noise damping.
- StarlockPlus tool mounting: Work faster and with higher precision thanks to 100% no-loss power transmission.
- QuickIN: Tool change in under 3 seconds with a patented, tool-free, FEIN rapid-clamping system.
- With the StarlockPlus tool mounting, you have access to around 100 FEIN accessories in the Starlock and StarlockPlus performance categories.
- DC motor: Effective, high-torque motor technology for output that is virtually identical to that of the model with a cord.
- Tacho generator: Constant speeds, even under load, and infinitely variable electronic speed control.
- Metal drive head: High load capacity and maximum service life, since all drive head parts are made of metal.
- Mechanical interface: For stationary use in the table or drill jig holders, or to attach depth stops.
- Electronic cell protection (ECP): ECP protects storage batteries against overloading, overheating and deep discharge.
- COOLPACK technology ensures a longer storage battery service life, enabling longer operation times.
- The battery capacity can be read directly on the battery.
- Compatible with AMPShare/Bosch Professional 18 V batteries from 2008 on.
-
Out of stock
Heavy-duty frame is welded tubular steel for strong supportSteel wheels provide easy mobility, independently lock for stabilityCompatible with the PWBS-14 bandsaw.Allows your shop to be versatile and organized while saving space.2042377Model PWBS-14CS Band Saw17-1/2”---15-1/2”5-1/2”2”3/4” -
Out of stock
Saw blade for JET CS-275 Manual Cold Saw. Trust this authentic OEM part. See model diagram and owner's manual for installation details and precautions which should be taken. One blade. -
Out of stock
General International dust collectors are high quality. This collector that will meet your dust management needs and applications. Designed for industrial applications with a continuous duty rating. The motor is totally enclosed, fan cooled and permanently lubricated. Intake screen prevents larger pieces from jamming in the impeller. Innovative designed to be portable and mobile on 7" rubber wheels. 5" heavy-duty PVC hose between body of fan and collector. It's user friendly and can move around your shop at great ease. Quick-release bag clamps with metal straps. The safety lock-out switch with removable key, helps prevent unauthorized use. The precision aluminum spin-balanced impeller for smooth operation and minimal noise. Includes reusable clear plastic collector bag and washable, extra fine 2 micron filter bag. 6-3/4" static pressure of water. 2 year limited warranty.
-
The Delta Mobile Base For 36-L336 36 in. UNISAW (For Dual Front Crank Unisaws) is essentially for easily moving your Delta Unisaw. Made from Steel in the US.- Adds mobility to your saw in your workshop
- Adjustable feet provided for leveling saw
- Heavet duty steel, designed specifically for this new Unisaw
-
Out of stock
- Bi-metal E-cut Blade for SuperCut only
- For wood, plastic, aluminum, copper, and sheet metal up to 18 gage
-
-
Out of stock
Shop Fox W1878 9" Benchtop Bandsaw
A small footprint and top handle make moving around your workspace easier.
The Shop Fox W1878 9" Benchtop Bandsaw has a combination of features including an efficient 1/3 HP motor, LED work light, deluxe extruded aluminum fence, and a rack-and-pinion table tilt system. The blade guard is also rack-and-pinion making adjustment an easy one-handed operation. The quality design and construction of this bandsaw assures easy, accurate cuts including fine detailed cuts without the vibration found in other benchtop models. Accepting 62-inch blades 1/8" to 3/8" wide, this benchtop bandsaw can cut pieces up to 3-5/8" thick. The blade guides are dual ball bearing and the wheels are adjustable for quick alignment and coplanarity. And, with this saw weighing less than 50 pounds, you can also effortlessly move it between your home, shop or job site. Like all Shop Fox bandsaws, the W1878 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. The W1878 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your saw. The Woodstock Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the bandsaw may be available online and shipped from the Woodstock parts warehouse in Springfield, MO. Made in an ISO 9001 factorySPECIFICATIONS:
- Motor: 1/3 HP, 120V, single-phase, 2.8A
- Max. cutting width left of blade: 8-7/8"
- Max. cutting height (resaw capacity): 3-5/8"
- Blade guides: Ball-bearing upper and lower
- Table size: 12" x 12"
- Table tilt: 0–45°
- Blade size: 61-13/16"–62-3/16" (1/8"–3/8" wide)
- Blade speed: 2460 FPM
- Dust port: 2"
- Footprint: 8-1/2" x 15-1/2"
- Overall dimensions: 21" W x 17" D x 29-1/2" H
- Approximate shipping weight: 49 lbs.
FEATURES:
- Two-year warranty!!
- Adjustable wheels for alignment/coplanarity
- Rack-and-pinion table tilt
- Ball-bearing blade guides
- Extruded aluminum rip fence with camlock handle
- 2" Dust port
- Lower wheel brush to prevent build-up of dust/pitch on wheel
- LED work light
- Carrying handle for easy portability
-
-
The FEIN FMM 350QSL START kit offers the powerful FMM 350QSL MulitMaster in a soft nylon bag with a Universal 152 blade, an unperforated triangle sanding pad and three sheets of each 80, 120 and 180 grit triangle sandpaper.- Lightweight and well balanced with soft grip
- Tacho generator and electronic control ensures constant speeds
- Design Reduces vibrations by up to 70% and noise up to 50%
- Features soft start with balanced armature and ball bearings for flawless operation
- StarLock system allows for change of accessories in less than three seconds
-
The combination of a 350 Watt motor with high copper content and independent tool housing makes the FEIN MultiMaster 350QSL more powerful, lower in vibration and quieter than every other comparable tool on the market. Weighing less than four pounds, the MultiMaster is lightweight and well balanced with a soft grip for comfortable handling. The tacho generator and electronic speed control ensures constant speeds while operating under load.- Lightweight and well balanced with soft grip
- Tacho generator and electronic control ensures constant speeds
- Design reduces vibrations by up to 70% and noise up to 50%
- Features soft start with balanced armature and ball bearings for flawless operation
- StarLock system allows for change of accessories in less than three seconds
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com