-
HSS, with carbide teeth, for gearbox type: b – for machining cast iron pipes (including those with cement chucks) and for machining non-alloyed steel pipes up to 400 N/mm2. -
Out of stock
- GUARANTEED QUALITY - High quality ribbed cast-iron headstock, tailstock, and bed.
- ULTRA SMOOTH TURNING - Precision-machined bed guideways allow the tailstock and tool rest to slide smoothly.
- PRECISE ROTATION - Precision-machined, high quality steel spindle, mounted on sealed, permanently lubricated bearings.
- INTUITIVE DESIGN - Equipped with plunger-type pin indexing mechanism for reeding and fluting.
- SIMPLE TOOL-MOUNTING - Spindle nose is threaded ⅝″ at both ends and bored for a “Morse No.2” taper.
-
Out of stock
This edge sander is perfect for schools and small shops. It’s light enough to move, but solidly built with a cast iron table, something you won’t find on most sanders in this price range.- 99” x 6” belt turns 3,773 feet per minute.
- Runs on 220-volt single-phase power, so you can use it just about anywhere.
- 33” x 12” all cast iron table will stay true and level over many years of use.
- Belt head can tilt, allowing you to sand at 45°, 90°, and 180°.
- Built-in table rise system with a spring assist lets you lift and lower the table without straining. Just turn the handwheel.
- Oscillating belt moves up and down to give you a smoother finished product and longer belt life.
- Storage cabinet in the base allows you to keep extra abrasive belts and tools nearby.
- Rigid steel stand stabilizes the sander for accuracy.
- 4” dust port helps you trap dust and maintain safe, clean air quality in your shop.
- Covered by a 1-year parts warranty.
- We keep replacement parts in stock at our Wisconsin wearhouse, so we can ship them to you without delay.
- You can count on lifetime technical support by phone from our team of customer service reps with hands-on woodworking experience.
SPECIFICATIONS
Item Number ES-6100 Shipping Weight 480lbs Table Size (Length) 33" Table Size (Width) 11.8" RPM 1150 Belt/Blade Size 99" x 6" Fence Size 27.5" x 2.3" Table Tilt (degrees) 0-90 Vertical Stroke (Table) 3.1" Spring Assist Power 220V Single Phase Length 50" Width 29" Height 36" Horse Power 2 Weight (lbs) 480 Oscillation 3/8" End Radius 2" Shipping Dimensions (Inches) 60x44x49 -
Out of stock
-
If you are looking to turn your garage or barn into a work space you can use all year-round, you will have to find a safe quiet and reliable heat source. This 80,000 BTU Natural Gas Utility heater is the way to go. It uses a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas. These heaters only require 115v AC power and can be vented vertically or horizontally - please check local codes and restrictions. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch. With the Durable Spark ignition and robust factory standard self diagnostic control module, we can offer a 3 year factory warranty on all parts and burners and a 10 year warranty on any defects in the heat exchanger. This heater offers the operating versatility and safety that you have come to expect from Mr. Heater®.
- 80,000 BTU per hour
- For use with natural gas
- Heats up to 2,667 sq. ft.
- Spark ignition features self-diagnostic control module
- Includes 2 angle brackets for ceiling mount
- Low Profile Design - Can be installed in low-ceiling buildings
- Minimum 8 ft clearance from floor to base of heater required
- 1/2in gas connection
- Category 1 vertical, category 3 horizontal venting
- Natural Gas to Liquid Propane conversion kit included
- Thermostat sold separately
- 125,000 BTU per hour
- For use with natural gas
- Heats up to 4,167 sq. ft.
- Spark ignition features self-diagnostic control module
- Includes 2 angle brackets for ceiling mount
- Low Profile Design - Can be installed in low-ceiling buildings
- Heater accepts WiFi thermostats
- Minimum 8 ft clearance from floor to base of heater required
- 1/2in gas connection
- Category 1 vertical, category 3 horizontal venting
- Natural Gas to Liquid Propane conversion kit included
- Thermostat sold separately - recommended 24V
-
-
Out of stock
Description
This Cyclone Dust Collector provides the efficiency of a 2-stage cyclone system with the portability of a single-stage dust collector. Features include high surface area pleated filters with paddles to mechanically knock off dust cake, remotely controlled magnetic switches, easy lid lifting levers for emptying collection drums, and a compact design for moving around the shop. Three models are available to suit most dust collection needs.California Proposition 65 WarningSpecifications
- Motor: 1-1/2 HP, 110V, 3450 RPM, 15A
- Intake hole size: 6"
- Impeller: 12-3/4" cast aluminum
- Collection drum size: 20 gallons
- Air suction capacity: 868 CFM
- Static pressure: 9.7"
- Approx. shipping weight: 375 lbs.
-
Out of stock
Clean lines, gentle curves and modern technology meet with the AP5780E. This slim line pellet stove is designed to fit into tighter spaces yet produces the same amount of heat as a full size pellet stove. It can heat up to 2,200 Sq. Ft. The all digital control system comes with a temperature readout and a remote control for simple adjustments. It comes with a 46 Lb. hopper to provide up to 32 hours of burn time between fillings. This stove is a show piece with its curved black sides and flat black accents. Pellet heaters work by using a software driven control board to precisely deliver a pre-determined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home. SpecificationsProduct EPA Approved Yes Product Heating Area (ft²) 2200 Product Cooktop No Product Air Wash System Yes Product Package Contents Pellet Stove, Remote Control Product Ash Drawer No Product UL Listed Pending Product ETL Listed Pending Product Blower Yes Product Catalytic/Non Catalytic Non Catalytic Product Vent Location Rear Product Stove Type Freestanding Product Auto Ignition Yes Product Maximum BTU 48000 Product Hopper Capacity (ft³) 46 Product Brick-Lined Firebox No Product Venting Required Yes Product Touchpad Controls Yes Product Wood Or Pellet Burning Pellet Product Vent Diameter (in) 3 Product Color / Finish Black Product Manufacturer Warranty Limited Lifetime firebox warranty, 1 Year all other parts, 1 year Electrical parts Product CSA Certified Yes Product Vented Or Vent-Free Vented -
Out of stock
- Includes Jessem prestige router lift 02320 Metric pre drilled
- Predrilled for Festool routers OF 1010 & OF 1400 only
- 32" x 24" phenolic table with aluminum extruded miter track
- Mast-R-Fence II router table fence with fully adjustable fence faces
- Fence position maintained by side mounted adjustable fence tracks
- Rigid, heavy-duty steel stand with upper and lower stretchers
-
Out of stock
- Includes Jessem prestige router lift 02332 IMPERIAL pre drilled
- Predrilled for Festool routers OF 1010 & OF 1400 only
- 32" x 24" phenolic table with aluminum extruded miter track
- Mast-R-Fence II router table fence with fully adjustable fence faces
- Fence position maintained by side mounted adjustable fence tracks
- Rigid, heavy-duty steel stand with upper and lower stretchers
-
Out of stock
-
If you are looking to turn your garage or barn into a work space you can use all year-round, you will have to find a safe quiet and reliable heat source. This 125,000 BTU Natural Gas Utility heater is the way to go. It uses a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas. These heaters only require 115v AC power and can be vented vertically or horizontally - please check local codes and restrictions. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch. With the Durable Spark ignition and robust factory standard self diagnostic control module, we can offer a 3 year factory warranty on all parts and burners and a 10 year warranty on any defects in the heat exchanger. This heater offers the operating versatility and safety that you have come to expect from Mr. Heater®.
- 125,000 BTU per hour
- For use with natural gas
- Heats up to 4,167 sq. ft.
- Spark ignition features self-diagnostic control module
- Includes 2 angle brackets for ceiling mount
- Low Profile Design - Can be installed in low-ceiling buildings
- Heater accepts WiFi thermostats
- Minimum 8 ft clearance from floor to base of heater required
- 1/2in gas connection
- Category 1 vertical, category 3 horizontal venting
- Natural Gas to Liquid Propane conversion kit included
- Thermostat sold separately - recommended 24V
-
-
Out of stock
14” Bandsaw #10-326 is RIKON’s newest model with many Patent Pending features that professionals will enjoy – including spring-loaded tool-less blade quides, quick-adjust fence system and quick-lock trunnion tableangling system, plus, a quick release blade tension lever, large adjustment handles, hinged safety blade guard with sight window, high work table height, and storage cabinet base. Its dual voltage, 1-3/4HP motor provides ample power for most every work encountered. Designed with two speed options – just change the drive belt on the pulleys to change from fast to a slower blade speed. Includes 6” tall rip fence with re-saw bar. Wired for use with 3-wire 120V receptacles. -
Out of stock
The 31-484 heavy duty oscillating floor spindle sander was designed for precision and durability. The fully enclosed heavy duty steel frame construction is optimized for dust management and keeps vibration to a minimum. The Heavy duty cast iron trunnion system supports oil bath gear box, which provides increased stability and accuracy. A unique 0° to 45° tilting spindle arbor design allows for adjusting the sanding angle to bevel sand while the table remains flat. -
Out of stock
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com