-
New from Mr. Heater® is the HERO®60: a 60,000 BTU CORDLESS propane powered forced air heater. Powered by propane and a 12v lead acid battery, this is the future of jobsite heat. Cut the cord for 4 hours on a single 5 hour charge or 8 hours with an optional second battery. Equipped with Mr. Heater Patented Quiet Burner Technology®, this heater burns with 40% less noise, making the jobsite safer and enabling you to work with a little more peace and quiet.
- 30,000 - 60,000 BTU per hour
- For use with propane gas
- Heats up to 1,500 sq. ft.
- Powerful, quiet and cordless
- Runs up to 4 hours on an internally rechargeable battery, up to 8 hours with optional 2nd battery
- Quiet Burner Technology® - 50% quieter than standard propane heater
- Operates while charging, one battery recharges in 3 hours or two in 6 hours
- One-touch gas valve with Continuous Ignition
- High temperature limit switch
- Flame safety shut-off
- Built-in trickle charger
-
Out of stock
-
Out of stock
New from Mr. Heater® is the HERO®35: a 35,000 BTU CORDLESS propane powered forced air heater. Powered by propane and a 12v lead acid battery, this is the future of jobsite heat. Cut the cord for a full 8 hours on a single 5 hour charge. Equipped with Mr Heater Patented Quiet Burner Technology, this heater burns with 40% less noise, making the jobsite safer and enabling you to work with a little more peace and quiet.- 35,000 BTU per hour
- For use with propane gas
- Heats up to 875 sq. ft.
- Powerful, quiet and cordless
- Runs up to 8 hours on an internally rechargeable battery
- Quiet Burner Technology® - 50% quieter than standard propane heater
- Operates while charging, recharges in 5 hours
- One-touch gas valve with Piezo Igniter
- High temperature limit switch
- Flame safety shut-off
- Built-in trickle charger
-
Out of stock
Heavy-duty design built for the jobsite. The Mr. Heater Liquid Propane Forced Air Heater comes with a standard 10ft hose and regulator and all the safety you would expect of a Mr. Heater product. Equipped with factory installed high limit switches and thermoelectric safety valves, you can feel comfortable using these heaters on any jobsite. Just plug the heater into a 110v outlet, hook up the included hose and regulator to a 20lb propane tank or larger, and you are ready to take the chill out of any job.-
Heating Area (Sq Ft) 950 Tank Capacity (Min) 20# Propane Cylinder Weight 17 Model MH38QFA Length 20.25 Width 9.50 Use Construction Sites, Garage, Workshops, Agricultural Buildings, Remodeling Jobs, Industrial or Commercial Workspaces, Emergencies Warranty 1 Year Limited Thermostat No Fuel Type Propane Heat Type Forced Air High Limit Safety Shut-off (HLS) Yes Indoor Safe No Ignition Piezo Hose & Regulator Included Yes
-
-
Out of stock
Heavy-duty design built for the jobsite. The Mr. Heater Liquid Propane Forced Air Heater comes with a standard 10ft hose and regulator and all the safety you would expect of a Mr. Heater product. Equipped with factory installed high limit switches and thermoelectric safety valves, you can feel comfortable using these heaters on any jobsite. Just plug the heater into a 110v outlet, hook up the included hose and regulator to a 20lb propane tank or larger, and you are ready to take the chill out of any job.- 60,000 BTU per hour
- For use with propane gas
- Heats approximately 1500 sq ft
- Runs up to 14 hrs on 20lb tank (low setting)
- High temperature limit switch
- Continuous ignition
- QBT Technology® - 50% Quieter than a standard propane heater
- 10ft hose and regulator included
-
Out of stock
Heavy-duty design built for the jobsite. The Mr. Heater Liquid Propane Forced Air Heater comes with a standard 10ft hose and regulator and all the safety you would expect of a Mr. Heater product. Equipped with factory installed high limit switches and thermoelectric safety valves, you can feel comfortable using these heaters on any jobsite. Just plug the heater into a 110v outlet, hook up the included hose and regulator to a 20lb propane tank or larger, and you are ready to take the chill out of any job.- 85,000 BTU per hour
- For use with propane gas
- Heats approximately 2125 sq ft
- Runs up to 8 hrs on 20lb tank (low setting)
- High temperature limit switch
- Continuous ignition
- QBT Technology® - 50% Quieter than a standard propane heater
- 10ft hose and regulator included
-
Out of stock
Heavy-duty design built for the jobsite. The Mr. Heater Liquid Propane Forced Air Heater comes with a standard 10ft hose and regulator and all the safety you would expect of a Mr. Heater product. Equipped with factory installed high limit switches and thermoelectric safety valves, you can feel comfortable using these heaters on any jobsite. Just plug the heater into a 110v outlet, hook up the included hose and regulator to a 40lb (on low setting) propane tank or larger, and you are ready to take the chill out of any job.- 125,000 BTU per hour
- For use with propane gas
- Heats approximately 3125 sq ft
- Runs up to 11 hrs on 40lb tank (low setting)
- High temperature limit switch
- Continuous ignition
- QBT Technology - 50% Quieter than a standard propane heater
- 10ft hose and regulator included
-
Out of stock Heavy-duty design built for the jobsite. This Thermostatically controlled Mr. Heater 400,000 BTU Propane Forced Air Heater comes with a standard 10ft hose, regulator, and all the safety you would expect of a Mr. Heater product. Equipped with factory installed high limit switch and continuous solid state ignition, you can feel comfortable using this heater on any jobsite. Just plug the heater into a 110v outlet then hook up the included hose and regulator to a 100lb propane tank or larger, then you are ready to take the chill out of any job.
- 250,000 - 400,000 BTU per hour
- For use with propane gas
- Heats up to 10,000 sq. ft.
- Operates up to 17 hours on 2-100 lb. propane tanks on low setting
- Rugged and durable steel construction
- Economical, efficient and clean burning
- Heavy duty high output fan
- Hose and regulator included
- Two 100 lb. propane tanks are required
-
Sale!
Out of stock
The Mr. Heater Liquid Propane Forced Air Heaters now come standard with Quiet Burner Technology - running 50% quieter than standard forced air heaters.- Portable Forced Air Propane Heater with Quiet Burner Technology
- 30,000–60,000 BTU heats up to 1,500 sq ft on a 20 lb propane tank
- For use outdoors or in well-ventilated areas; electricity required
Heavy-duty design built for the jobsite. The Mr. Heater Liquid Propane Forced Air Heater comes with a standard 10ft hose and regulator and all the safety you would expect of a Mr. Heater product. Equipped with factory installed high limit switches and thermoelectric safety valves, you can feel comfortable using these heaters on any jobsite. Just plug the heater into a 110v outlet, hook up the included hose and regulator to a 20lb propane tank or larger, and you are ready to take the chill out of any job.- 60,000 BTU per hour
- For use with propane gas
- Heats approximately 1500 sq ft
- Runs up to 14 hrs on 20lb tank (low setting)
- High temperature limit switch
- Continuous ignition
- QBT Technology® - 50% Quieter than a standard propane heater
- 10ft hose and regulator included
-
Motor start capacitor for Jet planer 722155 Model JWP-15BHH -
Out of stock
Delivery in Connecticut between $69 and $89 per ton/pallet based your address. One pallet of Bio Bricks weighs approx. one ton (2000lbs) Please call for delivery outside of Connecticut. BioBricks offer a number of distinct advantages. They have a uniform rectangular shape, which allows them to be tightly packed into a stove, optimizing fuel levels. These tightly packed bricks burn longer and more uniform.One pallet of BioBricks® delivers the same heat as a full cord of wood.
- BioBricks are ideally sized for wood stoves.
- Packing density is optimized.
- This high density fuel extends your burn times greatly.
- 100% wood, no artificial binders
- Cost effective, 1 lb of BioBricks equals 1.7 lbs of cordwood
- Environmentally friendly using our renewable resources
- Clean burning – minimal smoke, creosote and ash
- Lights with newspaper, no mess, no chopping, no bugs
- Easy to handle 38 – 42 lb packs with 50 packs per pallet
- BioBricks from BioPellet, LLC lessens our dependence on foreign oil
- Safely and easily stores inside or outdoors (UV pallet cover)
- Pallet size approximately 4x4x3 and is easily stackable
- Average burn time of 12 hours per stove fill
- Uniformity in size, density and moisture ensures predictable burning each time
BioBricks produce 1/2 the particulates (smoke) compared with good cordwood:
- "58% reduction in particulate emissions!" Read more >>
- "Replacing normal firewood with [densified wood] firelogs can be an effective means of reducing pollutant emissions from existing fireplaces...Pressed wood firelogs offer the potential to lower woodstove and fireplace emissions." Houston, James T., 1999, Louisiana State University Master's Thesis, The Development of a Firelog With Improved Air Emissions"
- Results show an average reduction of 52% in [Particulate Matter] grams per hour emissions overall...[Carbon Monoxide] emissions were more modestly reduced by 27%, and [Volatile Organic Compounds] were reduced 39%." "...even the worst performing firelog had only 29% of the worst wood fuel emissions and 74% of the cleanest wood fuel." Barnett, Bighouse, 1992, OMNI Environmental Services, Inc., In-Home Demonstration of the Reduction of Woodstove Emissions from the Use of Densified Logs
- "The overall average PM [particulate emissions] for all 9 stoves using cordwood were 24 g/hr. Using [densified logs] the emissions averaged 12 g/hr for an average reduction of 52%" Hayden, Braaten, 1991, ERL/CANMET, Ottawa Ontario, Reduction of Fireplace and Woodstove Emissions Through the Use of Manufactured Firelogs
-
Out of stock
Designed for fast, consistent, low-effort production, this 25” industrial planer lets you set the bed height through a programmable logic controller. No more turning a handwheel to find your thickness!-
-
- 10 hp motor has enough muscle to smooth full 25” boards.
- Spiral cutter head (included) spins at 5,000 rpm.
- Rows of rotatable carbide blades make the spiral cutter head last much longer and work more quietly than a straight-knife cutter.
- Runs on 220-volt single-phase power, so you can use this sophisticated machine in almost any shop.
- Can smooth off up to .25” of material at one time.
- Variable speed from 20 to 30 feet per minute, so you can finetune to get the exact speed you need for your material and finish.
- 25” x 32” main cast iron table expands to an even larger 25” x 57”, supporting your material and helping you create straight, smooth boards.
- Programmable controller makes it simple to set the height. Just enter what you want, and the bed automatically moves to that setting.
- Controller includes automatic backlash compensation to produce exact, repeatable thicknesses.
- Segmented steel infeed roll allows you to smooth multiple boards with different heights at once, increasing your productivity.
- Durable dual steel outfeed roll moves boards along to the cutting head.
- You can set the quick-adjust bed rolls high to reduce friction on rough-sawn stock, or adjust them lower for straighter, smoother results.
- Segmented chip breaker prevents large chips or strips of wood from clogging up the machine or your dust collector.
- Solid iron pressure bar applies even force across the boards to avoid chipping.
- Anti-kickback fingers grip the material so it’s less like to shoot back out if there’s a problem at the cutter head.
- Oversized bearing housings ensure quiet performance and long life.
-
- .
-
-
Sale!
Out of stock
The G0701 19" Ultimate Bandsaw is made for production work with its large cutting capacities, foot brake, resaw fence and motorized upper blade guide. The 5 HP motor powers through wood at a maximum 19-1/2" cutting capacity and the 18-3/8" throat is big enough for most applications. No more cumbersome two-handed height positioning! Simply toggle the switch up or down for motorized blade guide adjustments. The G0701 has an extra-wide 28" x 24" cast-iron table that can tilt from 5° left to 45° right. The cast-iron fence includes an extruded-aluminum resaw fence that attaches quickly and supports tall stock exceptionally well. The cast-iron table trunnions add additional weight for greater stability. You'll also appreciate the computer balanced cast-iron wheels with rubber tires for the smoothest operation possible, blade tension gauge and rack and pinion table tilt adjustment. Made in an ISO 9001 factory CSA certifiedSPECIFICATIONS:
- Motor: 5 HP, 230V, single-phase, 22A
- Guide post motor: Universal DC, 40W
- Cutting capacity/throat: 18-3/8"
- Maximum cutting height: 19-1/2"
- Table size: 28" x 24"
- Table tilt: 5° left, 45° right
- Floor to table height: 35-1/4"
- Blade size: 166–168" long
- Blade width range: 3/8 – 1-3/8"
- Blade speed: 4975 FPM
- Footprint: 31" x 23-1/2"
- Overall size: 86-1/2" H x 36-5/8" W x 33" D
- Approximate shipping weight: 810 lbs.