-
Out of stock
The JessEms router table stand is designed and manufactured in Canada. From its solid 6063 aluminum extruded legs and braces to its stainless steel hardware, this stand will not disappoint. The unique stand legs are extruded with 6063 aluminum and were specifically designed for a square cabinet to fit with no obstructions. In addition, the stand legs have t-slots for mounting various accessories you may have. The braces, also extruded, are designed with a cabinet in mind and will sit flush with the bottom of your cabinet. -
Out of stock
The Fence System for the Jet Router Table is loaded with features for the most accurate, efficient experience when routing. The Fence comes with easy to read guide rails that allow users to dial in the exact size profile needed. The top of the fence features an integrated, easy to read scale in order to places stops at different points of operation. The integrated dust port collects dust at the source of the cut, minimizing the spread of dust. -
-
These 16" table legs are perfect to pair with a table or bench top.
These are very heavy duty able to withstand practically any table top you choose to use. The cast aluminum makes these table legs incredibly strong while keeping things to a manageable weight.Specification:
- Height: 16"
- Mounting width: 12"
- Widest Point: 15-1/2"
Features:
- Raised Gold Lettering
- Included Threaded Inserts and Bolts
- Cast Aluminum - Like Cast Iron but without the weight.
- Made in The USA
-
The 2598-22 M12 FUEL 2-Tool Combo Kit is the Most Capable and Most Compact 12-Volt Hammer Drill Driver and Impact Driver Combo Kit on the market. Included is the M12 FUEL Hammer Drill Driver (2504-20), the Most Capable, Lightest Weight and Most Compact 12-Volt Hammer Drill Driver in the market. At only 6.6 and 2.8 lbs. of weight it is the best Hammer Drill Driver to use in compact spaces. It delivers the power to do a wide variety of applications at 1700 RPMs and 350 in./lbs. of torque. Also included, the M12 FUEL Hex Impact (2553-20), the Fastest Driving Speed, Most Compact with 4- Mode Drive Control Impact Driver in the market. At 3,300 RPM the impact drives screws over 20% faster than competitors. At 5.1 in. L it allows for unmatched access in tight spaces. The 4-Mode DRIVE CONTROL provides greater control over output speed and power for greater versatility by delivering 0-1,300 RPM in Mode 1, 0-2,400 RPM in Mode 2 and 0-3,300 RPM in Mode 3. Mode 4 is Self-Tapping Screw Mode which is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws. -
Out of stock
- A complete kit to maximize the value of your FS guide rails when used with your Festool plunge saw or router
- All the things you need, packed neatly and conveniently in a Systainer. No need to spend time looking for the pieces
- Angle Unit for mitered or compound cuts, Limit Stop for repeat cuts, Deflector for more efficient cutting, Connectors for limitless cutting, and more
- Includes: 1 Angle unit, 1 Limit Stop, 1 Splinterguard (1400 mm), 1 Deflector, 2 Guide Rail Connectors, and 2 Screw Clamps, packed in a Systainer 1
- Made in Germany
-
- Self-supporting motor with vibration decoupling for outstanding vibration and noise reduction.
- Very powerful 350 Watt FEIN high-performance motor for optimal cutting speeds and maximum work progress.
- Highest quality and stability thanks to metal gear case and consistent use of ball or needle bearings.
- Convenient QuickN rapid-clamping system
- Electronic speed control with tacho generator for constant speed, even under load.
- Integrated interface for mounting additional system accessories.
- Soft grip zone provides optimal handling.
- Starlock Plus tool mount with outstanding torque transfer, fits all FEIN Starlock, StarlockPlus and StarlockMax accessories.
-
- Oscillating Multi-Tool With Soft Bag & Start Accessory Package
- 65 mm Long Life E-Cut Saw Blade
- Features Star-Lock Technology With Less Than 3 Second Blade Change
- Improved Cutting Speed Due To Solid Lock Up Between Blade & Tool For Faster Cuts & Smoother Performance
- Accessory Package Includes: 3 Sanding Sheets Of 60G
-
Out of stock
Shop Fox® Heavy Duty Mobile Bases are designed to give you a stable and mobile platform upon which to mount machinery and equipment having a variety of base sizes and weights. The heavy-duty metal casters are arranged on outriggers allowing the machine to sit as low as possible and yet be extremely stable. Swivel casters on two corners provide excellent maneuverability. The bolt pattern on the fixed caster side allows orientation of the wheels in either of two directions. The base can be assembled in any of eight configurations providing maximum flexibility of use. The unique two piece retractable feet use rare earth magnets to allow the knob to turn while the foot pad is tight to the floor. You will find these mobile bases to be far superior to any mobile base on the market in strength, adjustability and movability. This patented mobile base is the most stable on the market with outrigger type supports. Adjusts from 18-1/2" x 24-1/2"" to 28-1/2" x 33-1/2". 1300 lb. maximum capacity.California`s Proposition 65 -
- Vacuum-brazed diamond grit cuts faster and lasts longer
- Segmented teeth reduce debris and heat
- AutoStart pilot bit is spring-loaded, retractable shaft allows walk-free cutting without a pilot hole
- Pilot bit offers unique grind that starts holes accurately every time
- Plastic case
-
DETAILS
- Anti-vibration system: Permanently safe, pleasant working conditions with minimum vibrations and outstanding noise damping.
- StarlockPlus tool mounting: Work faster and with higher precision thanks to 100% no-loss power transmission.
- QuickIN: Tool change in under 3 seconds with a patented, tool-free, FEIN rapid-clamping system.
- With the StarlockPlus tool mounting, you have access to around 100 FEIN accessories in the Starlock and StarlockPlus performance categories.
- 350 W FEIN motor: Overload-proof, high-performance motor with high proportion of copper for higher cutting speed and rapid work progress.
- Tacho generator: Constant speeds, even under load, and infinitely variable electronic speed control.
- Metal drive head: High load capacity and maximum service life, since all drive head parts are made of metal.
- Mechanical interface: For stationary use in the table or drill jig holders, or to attach depth stops.
- Industrial cable: Large operating radius thanks to the 5 m, fine-stranded rubber-clad cable in industrial quality.
- 1 E-Cut Long-Life saw blade 2-9/16 in (65 mm) (type 161)
- 1 E-Cut Long-Life saw blade 1-3/8 in (35 mm) (type 160)
- 1 E-Cut Carbide Pro saw blade (1-1/4 [32] in[mm])
- 1 HSS segment saw blade
- 1 E-Cut Standard saw blade, curved (2 [50] in[mm])
- 1 rigid scraper blade
- 1 perforated sanding pad
- 20 perforated sanding sheets (5 each of grits 60, 80, 120, 180)
- 1 tool case
-
Improved, high airflow, cyclone design stops over 99% of fine dusts and bulk debris from clogging your vacuum's filter - eliminating suction loss while saving you time and money on expensive replacements! 10 Gal. Deluxe kit comes with everything you need for heavy dust loads!- The latest and greatest edition of the original dust cyclone!
- Up to 2x the airflow of smaller cyclones and lid-style separators.
- Upgrades any make/model shop vacuum with 2.5" hose fittings.
- Neutral-vane technology improves separation efficiency by 20%.
- Large 10-gallon steel drum contains heavy dust loads.
- Highly portable design with stable caster wheel base.
- 4-1/2 foot crush-resistant hose features 2.5" hose cuffs.
- Anti-static components significantly reduce the likelihood of static shocks.
Waste Capacity 10 Gallons Portable Yes Inlet Size Nominal: 2.25" I.D. / 2.5" O.D. Actual: Tapered 2.31" to 2.29" I.D. Outlet Size Nominal: 2.25" I.D. Actual: Tapered 2.31" to 2.29" I.D. Discharge Size 3" I.D. Primary Build Materials Steel, Polypropylene Thickness 22 Gauge (Drum Body) Static Resistance Rating Anti-Static Color Clear Width 19" Height 34-1/4" Height to Center of Inlet 32 -7/16" Product Compatibility Wet/Dry Vacuums with 2.5" hoses and inlets Contents Cyclone Separator, Pre-Cut Drum Lid, Lid Clamp, Drum Dolly, Caster Wheels, Hose, Hardware Manufacturer Oneida Air Systems Country of Manufacture United States Warranty Information 1 Year Limited Warranty Proposition 65 WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm.
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com