- The latest and greatest edition of the original dust cyclone!
- Up to 2x the airflow of smaller cyclones and lid-style separators.
- Upgrades any make/model shop vacuum with 2.5" hose fittings.
- Neutral-vane technology improves separation efficiency by 20%.
- Large 10-gallon steel drum contains heavy dust loads.
- Highly portable design with stable caster wheel base.
- 4-1/2 foot crush-resistant hose features 2.5" hose cuffs.
- Anti-static components significantly reduce the likelihood of static shocks.
-
Out of stock
Improved, high airflow, cyclone design stops over 99% of fine dusts and bulk debris from clogging your vacuum's filter - eliminating suction loss while saving you time and money on expensive replacements! 10 Gal. Deluxe kit comes with everything you need for heavy dust loads! -
Out of stock
Upgrade Your Single-Stage Dust Collector and Say Goodbye to Clogged Filters!
Single-stage dust collectors are great for small, hobbyist shops but they come with a cost - fine dust quickly clogs the filter, reducing suction and leaving dust at your tools! Worse still, there's nothing to protect your dust collector from being damaged should you accidentally suck up large wood chunks, bolts, etc. How do you improve your dust collector's performance while dramatically reducing the need to clean or replace its filter? Install our cyclone! Oneida Air Systems' patented Super Dust Deputy® cyclone separates over 99% of dust and debris from the incoming airstream, virtually eliminating filter clogging, suction loss, and significantly prolonging the lifespan of your filter. (US Pat. #7282074, #D703401).Benefits & Features
- Prevents both fine dust and large debris from reaching your dust collector
- Prolongs the lifespan of the filter while reducing the need for cleanings
- 4/5 Cyclone with included adapters offers 4 or 5" OD inlet (connects to your tools) and 4 or 6" OD outlet (connects to your collector)
- Ultra-high efficiency with integrated air ramp and neutral-vane inlet
- Lightweight and compact design for fast and simple installations
- Compatible with almost any 0.5-3HP dust collector (e.g. Delta, Grizzly, Harbor Freight, Jet, etc.)
- Static dissipative construction safely conveys static charge build-up to the electrical ground, preventing harmful discharges
-
Fein 31309108008 DIE -11 GAGE - BLK 5.0 -
Powerful 1200W /10A motor for rapid stock removal with variable speed control. Small diameter front roller for sanding confined areas and detailed work. Belt tracking adjustment for accurate alignment of sanding belt. Side dust port connects to dust bag or vacuum system. Neon safety light indicates when power is available to the sander. Includes inversion stand, dust bag and sanding belt. Weight 4.8kg / 10.5lb.
-
-
Out of stock
Heavy-duty design built for the jobsite. The Mr. Heater Liquid Propane Forced Air Heater comes with a standard 10ft hose and regulator and all the safety you would expect of a Mr. Heater product. Equipped with factory installed high limit switches and thermoelectric safety valves, you can feel comfortable using these heaters on any jobsite. Just plug the heater into a 110v outlet, hook up the included hose and regulator to a 20lb propane tank or larger, and you are ready to take the chill out of any job.-
Heating Area (Sq Ft) 950 Tank Capacity (Min) 20# Propane Cylinder Weight 17 Model MH38QFA Length 20.25 Width 9.50 Use Construction Sites, Garage, Workshops, Agricultural Buildings, Remodeling Jobs, Industrial or Commercial Workspaces, Emergencies Warranty 1 Year Limited Thermostat No Fuel Type Propane Heat Type Forced Air High Limit Safety Shut-off (HLS) Yes Indoor Safe No Ignition Piezo Hose & Regulator Included Yes
-
-
Out of stock
New from Mr. Heater® is the HERO®35: a 35,000 BTU CORDLESS propane powered forced air heater. Powered by propane and a 12v lead acid battery, this is the future of jobsite heat. Cut the cord for a full 8 hours on a single 5 hour charge. Equipped with Mr Heater Patented Quiet Burner Technology, this heater burns with 40% less noise, making the jobsite safer and enabling you to work with a little more peace and quiet.- 35,000 BTU per hour
- For use with propane gas
- Heats up to 875 sq. ft.
- Powerful, quiet and cordless
- Runs up to 8 hours on an internally rechargeable battery
- Quiet Burner Technology® - 50% quieter than standard propane heater
- Operates while charging, recharges in 5 hours
- One-touch gas valve with Piezo Igniter
- High temperature limit switch
- Flame safety shut-off
- Built-in trickle charger
-
Out of stock
Replacement conveyor belt of Jet JWDS2244 723540OSK Oscillating Sander. -
Out of stock
Spring-pin snap adjustment requires no tools for easy assemblyAdjustable width and length let you configure the base to the tool for total support and portabilityTwo fixed and two swivel casters provide easy maneuverabilityStrong, yet lightweight base can hold tools up to 600 lbs.Expands from 18" x 18" to 28" x 28" -
Out of stock
JessEm router table fences glide smoothly in tracks and anchor firmly with a twist of the molded lock-down knobs. It is a precision machined aluminum extrusion with red anodized finish. The PVC coated MDF fence face adjusts for varying bit diameters and has extruded shim-bars for jointing type operations.- Heavy duty aluminum extruded fence frame
- Fully adjustable fence faces with quick locking knobs
- Side mounted fence tracks with built in scales
- Tool free fence adjustments
- 1/32" and 1/16" shimming/offset bars standard
-
The Bosch GOP40-30B StarlockPlus® Oscillating Multi-Tool Kit includes a tool that has the Starlock® next-generation 3-D tool-accessory interface, which produces best-in-class accessory grip, making it the new professional standard in oscillating tool performance. With more contact surface area between the tool and accessory, the Starlock® interface is a cupped 3-D tool-accessory connection that delivers greater torque transfer for an expanded work capacity. The no-touch blade-change system makes it easy to attach, remove or reposition blades.- (1) GOP40-30 StarlockPlus® Oscillating Multi-Tool
- (1) OSL114F 1-1/4 In. Plunge Blade
- (1) OSL114JF 1-1/4 In. Xtra-Clean Plunge Blade
- (1) OSL312F 3-1/2 In. Segment Blade
- (1) 1600A008LT Sanding Pad
- (25) Sanding Sheets
- (1) Accessory Box
- (1) Carrying Bag
-
Out of stock
The JessEms router table stand is designed and manufactured in Canada. From its solid 6063 aluminum extruded legs and braces to its stainless steel hardware, this stand will not disappoint. The unique stand legs are extruded with 6063 aluminum and were specifically designed for a square cabinet to fit with no obstructions. In addition, the stand legs have t-slots for mounting various accessories you may have. The braces, also extruded, are designed with a cabinet in mind and will sit flush with the bottom of your cabinet.