Shop

Out of stock

Makita XCU04PT 36V (18V X2) LXT® Brushless 16″ Chain Saw Kit (5.0Ah)

$545.95

Landscapers and contractors are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 36V (18V X2) LXT® Brushless 16” Chain Saw (model XCU04PT). With zero emissions, lower noise, and considerably less maintenance, the XCU04PT is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® batteries for maximum power, speed and run-time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.

The XCU04PT has a 16” guide bar and the Makita-built Outer Rotor BL™ Brushless Motor direct drive system motor with variable speed delivers 0-3,940 FPM for increased cutting speed. It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion batteries, and the saw is ready to use. Convenience features include a "tool-less" chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

Details
General IntL 10-2000 Ceiling Mount Air Filtration System

$545.99

This air filtration system is setting new standards in clean air. With the smart technology the laser sensor continually scans the air in the room for dust, dirt, smoke and other particulates. When it senses those particulates it turns on to automatically clean the air. It senses particles as small as 3 Microns. Since it typically hangs above a tool or workbench the 2 LED lights will help light the project below. You can operate it in manual mode and control three speeds... 1750, 1300 & 880 CFM. At top speed you can clean the air in a 20' x 20' x 8' shop in just under 2 minutes, or over 32 times an hour. In the manual mode you can also control the times to set it at 1 to 24 hours by the hour with the convenient remote control.

Add to cart Details
Out of stock

Delta Power Tools 37-071 6 Inch MIDI-Bench Jointer

$549.00
After nearly 90 years of expertise in the woodworking business, DELTA Power Equipment Corporation (DELTA PEC) has become one of the most revered brands in woodworking tools today. DELTA Power Equipment Corporation focuses on innovations to help the woodworker create masterpieces easier and with more precision. The company designs, manufactures and distributes a variety of stationary woodworking tools including electric table saws, band saws, radial arm saws, scroll saws, drilling machines, jointers, planers, mortisers, lathes, grinders and dust collectors for the professional and advanced woodworking markets. Motor: 12 A, 120V, 1 Phase, 60 Hz, Universal [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- Durable cast iron construction increases weight providing stability and reducing vibration
- Precision-machining of the table and fence ensures long term accuracy
- Heavy duty, cast iron fence support system for accurate jointing
- Simple fence adjust system with adjustable positive stops at90 and 45 in and out
- Up to 1/8 in. depth of cut
[/fusion_checklist]
Details
Saw Trax Mid Fence

$549.00

The Mid Fence is the most popular accessory for boththe Saw Trax Full Size and Compact Panel Saws! Allows user to cut smaller pieces at waist level. Features all steel construction with a powder coated finish. Shelf is easily removed for processing full sheets. Fully adjustable and sold as a pair (left side and right side).

Add to cart Details
Saw Trax Floating Router Plate Panel Saw

$549.00
The Floating Router Insert is compatible with any current model Saw Trax brand Panel Saw.
- Floating platform generates uniform dados even on bowed or twisted material.
- Perfect for V grooving ACM Panels! Make your own dimensional displays and architectural elements!
- Fits on all current Saw Trax models.
- Universal design accommodates most router motors. Porter cable 892 router recommended.
- This set up allow the router to follow the contours of the sheet, giving consistent dado even on bowed or warped material.
- Router not included
Add to cart Details
Out of stock

MODEL 2875XL SHOP STYLE MITER SAW INCLUDING STOP SYSTEM–36″ WIDTH

$549.90
Rousseau shop style miter saw with stop system. Designed to fit saws with wider bases & sliding back. Easy folding-down wings for confined spaces.
MODEL 2875-XL FEATURES
- 36” x 19¼” Platform
- Designed To Fit Saws With Wider Bases & Sliding Back Fences
- Sturdy All-Steel Construction
- Easy Fold-Down Wings For Confined Spaces
- Powder Coated Finish
- Includes Stop System On Left Side
Details
Out of stock

RIKON Power Tools 50-122 6″ x 48″ Belt / 10″ Disc Sander

$549.95
The 6” x 48” Belt / 10” Disc Sander with Stand offers woodworkers the same belt and disc sizes and operating features as the #50-120, but, has a more powerful motor, re-designed base of sturdy, heavy gauge sheet steel, higher positioned disc location, cast aluminum disc table with patented rack & pinion table angle-setting handle system, and it includes a steel stand.
- Cast Iron & Steel Construction
- Belt Size 6″ x 48″
- Belt Tilts 0 – 90°
- 10″ Disc Diameter
- Includes: Steel Stand, Work Support Table, Miter Gauge, HEX Wrenches, Convenient Carrying Handles, 1 – 80 Grit Disc and 1 – 80 Grit Belt
Details
Sale!

Out of stock

Jet 713000 Filtration System Model AFS1000C NEW

Original price was: $649.99.Current price is: $549.99.
Introducing New Auto Dust Sensing Technology

The AFS1000C, when in auto mode, adjusts fan speed based on air quality

Auto-cleaning technology enables AFS unit to run only when dust is detected

Molded footing allows air flow under unit for when on a work bench.

Fan speed can be set in auto mode, or adjusted, from the control panel or the RF remote

Six speeds allow for precise adjustment
Details
General 10-030 DAS M1 Dual Switch Dust Collectors 120V 1Phase

$549.99

1HP Dual Action Switch Commercial Dust Collector with 1 Micron Canister (120V 1Phase)

This general dust collector is a high quality collector that will meet your dust management needs and applications. Simply plug your tool into the DC and the DC will turn on and off with the tool. Designed for industrial applications with a continuous duty rating. The motor is totally enclosed, fan cooled and permanently lubricated. Intake screen prevents larger pieces from jamming in the impeller. Innovative designed to be portable and mobile on four heavy duty swivel casters. 5" heavy-duty PVC hose between body of fan and collector. It's user friendly and can move around your shop at great ease. Quick-release bag clamps with metal straps. The safety lock-out switch with removable key, helps prevent unauthorized use. The precision aluminum spin-balanced impeller for smooth operation and minimal noise. Includes reusable clear plastic collector bag and washable, extra fine 1 micron filter bag. 6-5/32" static pressure of water without bag. Electrical testing laboratory certified (ETL).

Add to cart Details
Out of stock

Fein MSF636-1 3.7 Amp 6-Inch Random Orbit Sander with Vacuum Adaptor

$550.00
- Extremely powerful 6" 8800rpm random orbit sander with ideal dust extraction for all surfaces
- A particularly wide eccentric travel produces outstanding performance on any surface
- Item is manufactured in Germany
- Fastest OPM of any random orbit sander on market
- 380 watt 7500 RPM
- 8-hole hook & loop
- Reduces sanding time by 30%
- Direct dust collection through pad
Details
Out of stock

Jet 32″ x 24″ Cast Iron Table

$552.86
- Precision machined cast iron construction
- 88 pound table creates solid work surface for all routing applications
- Large table footprint with space for all routing applications
Details
Delta Power Tools 22-555 13 In Portable Thickness Planer

$569.99
After nearly 90 years of expertise in the woodworking business, DELTA Power Equipment Corporation (DELTA PEC) has become one of the most revered brands in woodworking tools today. DELTA Power Equipment Corporation focuses on innovations to help the woodworker create masterpieces easier and with more precision. The company designs, manufactures and distributes a variety of stationary woodworking tools including electric table saws, band saws, radial arm saws, scroll saws, drilling machines, jointers, planers, mortisers, lathes, grinders and dust collectors for the professional and advanced woodworking markets. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- Powerful 15A motor capable of handling the demands of a small shop
- Four column design provides excellent stability for smooth, accurate planing over many years of use
- Quick-change knife system with dual edge disposable knives lets you change knives without difficult to use alignment jigs
- Adjustable infeed and outfeed tables to better support long pieces and reduce snipe
- Reversible dust port allows you to collect chips from the right or left side of planer
[/fusion_checklist]
Add to cart Details
Out of stock

Fein Quick-In FSC 2.0Q-IS Interior Set

$578.00
The Fein SuperCut is a unique, premium performance system for building and renovation. Fast, strong, versatile and durable, it not only makes your work go 350% faster, it meets the toughest tool demands. Exceptional know-how, that translates into huge benefits for building trades and industry. The Fein SuperCut Interior Set is an ideal professional tool that gives you versatility to use E-Cut saw blades for wood, plastic, drywall, and metal. This tool allows for precise cuts, even in tight, difficult to reach areas. This is the tool for the professional who wants to get there work done faster with precision. A high quality, durable power tool that will help make you more profit.
- Quick In system for fast and reliable blade change
- High Powered Motor for up to 350% faster working results
- Complete systems for many different professions
- 40 years of experience in the oscillating power tools
Details
Out of stock

RIKON 20-600H 6″ Benchtop Jointer with Helical Cutter Head

$579.00

Details
Out of stock

US Stove US1269E 900 Sq. Ft. Log Wood Cast Iron Stove

$579.00

The US Stove Company US1269E is a rustic, heavy duty, cast iron constructed, wood stove that is ideal for any rugged outdoorsman, those with a nostalgic taste, or someone simply looking for reliable, cost efficient, heating. Inside this rugged exterior is a modern EPA certified stove providing a clean burning heating solution. It is perfect for log cabins, large garages and shops. This stove is durability defined and is easy to use. The US1269E replaces previous US Stove model 1269E wood stove.

Details
Fein Turbo II HEPA Vac/Dust Extractor Set 8.4 Gallon sku 92036060990

$579.95
- DETAILS
  
  High performance turbine for 151 cfm (71 l/s) flow rate and 98.4" of water lift (245 mbar vacuum).
  
  Large range due to 19 ft [6 m] power cord and 13 ft [4 m] vacuum hose.
  
  Low volume of 66 dB (A).
  
  Anti-static function against electrostatic charging during work – electrostatically conductive with optionally available suction hose 3 13 45 120 01 0.
  
  Tool coupling with suction control for easy control of suction power.
  
  Large wheels rotate 360° for optimal maneuverability, even in tight conditions.
  
  Autostart outlet with power-on delay to prevent current spikes.
  
  Practical storage area with rim.
Add to cart Details
Out of stock

Rikon Model 30-120: 13″ Benchtop Drill Press

$579.99
Rikon Model 30-120: 13″ Benchtop Drill Press
Details
Out of stock

Makita 18V LXT Brushless Couple Shaft Power Head Kit XUX02SM1X6

$588.00

With zero emissions, lower noise, and maximum versatility, the 18V LXT® Couple Shaft Power Head Kit with a 13" String Trimmer, 10" Pole Saw, 20" Articulating Hedge Trimmer, and Blower Attachments (XUX02SM1X6) is a welcome solution for a range of trimming, cutting, and clean-up applications. It’s powered by one Makita 18V LXT® Battery for performance and run time without the hassles of gas and without leaving the 18V LXT® battery platform. The Power Head features a lever-style lock system for quick tool-less installation and replacement of attachments.

The XUX02SM1X6 kit includes the 13" String Trimmer Couple Shaft Attachment (EM409MP) featuring the rapid loading bump and feed trimmer head, the 10" Pole Saw Couple Shaft Attachment (EY402MP), which provides a seven foot fixed length for trimming hard to reach branches, the 20" Articulating Hedge Trimmer Couple Shaft Attachment (EN402MP) which features 13 angle settings with 135° of working range for efficient trimming of overhead and low-lying hedges, as well as the Blower Couple Shaft Attachment (UB401MP) which features an axial fan design that provides high blowing force power needed for quick clean-ups

The Makita-built brushless motor delivers up to 9,700 RPM. The motor is electronically controlled to optimize battery energy use for up to 50% longer run time per battery charge than similar non-brushless tools. The brushless motor runs cooler and more efficiently for longer life and electronic controls efficiently use battery energy to match the changing demands of the application for increased power and speed when needed.

It features Makita Extreme Protection Technology (XPT™). XPT™ is a protective seal inside the tool. It is designed to improve a tool’s operation in harsh conditions by channeling water and dust from key internal components.

It’s part of Makita’s expanding 18V LXT® System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita® 18V LXT® Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita® 18V LXT® Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.

Details
Sale!

Out of stock

Fein 71292761090 18-Volt Cordless Oscillating Multi-Tool with Case – AFSC18QSL

Original price was: $633.00.Current price is: $590.00.
71293462090, FEIN AMM 700 MAX SELECT SET CORDLESS OSCILLATING MULTITOOL
Our best cordless MultiTool for ultra-rapid work progress with interior construction and renovation in the variant without a storage battery and charger – with a bi-metal saw blade for wood, metal, and plastics. Features:
- Anti-vibration: Minimal vibration and outstanding noise dampening means you can work comfortably, for longer.
- StarlockMax tool mounting: Work faster and with higher precision thanks to 100% no-loss power transmission.
- QuickIN: Change accessories in under 3 seconds with a patented, tool-free, FEIN rapid-clamping system.
- With the StarlockMax tool mounting, you have access to around 180 FEIN accessories in the Starlock, StarlockPlus and StarlockMax performance categories.
- 18 V FEIN PowerDrive motor: Especially powerful, virtually wear-free brushless motor with high efficiency, extremely high load handling and long service life.
- Variable Speed: Constant speed even under load and variable electronic speed control.
- Metal drive head: 100% of gearbox components are made from metal providing high load capacity and long service life.
- Mechanical interface: For stationary use in the table or drill jig holders, or to attach depth stops.
- SafetyCell technology: Perfect protection from overload, overheating and deep discharge thanks to Li-ion batteries with individual cell monitoring.
- Dust protection grille - protects tool from aggressive dust.
- The battery capacity can be read directly on the battery.
- Specifications:
  
  Battery voltage 18 V
  
  Battery compatibility Li-ion / HighPower Li-ions
  
  Battery interface MultiVolt
  
  Oscillations 10,000 - 19,500 opm
  
  Tool mount StarlockMax
  
  Tool change QuickIN
  
  Range 2 x 2,0°
  
  Weight without battery 2.43 [1.10] lbs[kg]
  
  Sound pressure level LpA 83 dB
  
  Measurement uncertainty of the measured value KpA 3 dB
  
  Sound power level LWA 94 dB
  
  Measurement uncertainty of the measured value KWA 3 dB
  
  Peak sound value LpCpeak 97 dB
  
  Measurement uncertainty of the measured value KpCpeak 3 dB
Details
Out of stock

Makita XCU03PT1 18V X2 LXT Lithium-Ion (36V) Brushless Cordless 14″ Chain Saw Kit (5.0Ah)

$595.00

Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT (36V) Brushless Chain Saw Kit (model XCU03PT). With zero emissions, lower noise, and considerably less maintenance, the XCU03PT is a welcome solution for cutting and trimming applications. It's powered by two 18V LXT batteries for 36V power and run time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw. The XCU03PT has a 14" guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)).

Details
Out of stock

Granberg EZ Rail Sawmill Guide System, 10′ Model# G1010 & Mill G778-36

$595.00

The best way to make a perfect first cut with a Granberg Mill, now even better! Comes in two 5′ sections. Makes for easy transport and increased versatility. Design upgrades include: Longer rail system for the same price. Single piece dog hinge plate for easier assembly. Four cross members for added stability. Part Number and name: G1010 – 10 Foot E-Z rail.
Used for/with: G778, sizes 24” -84”, G777 Small Log Mill.

Fits: Can be used with any horizontally-oriented mill. Larger crossbars available for logs that are greater than four feet in diameter.

General description: Aircraft-grade aluminum rails provide a stable surface that attaches in seconds and is easily leveled left to right, front and back. Cross members are adjustable along whole length of the EZ rails.

Use description: Hammer in dogs attached to cross members, set levels using a screwdriver or drill, then start milling

MADE IN THE USA
Also, includes G778-36 36in Alaskan Chainsaw mill.
Part Number and name: G778-36 Alaskan Chainsaw mill, 36 inch

Used for/with: Chainsaws with bars of 36” or less and 70cc or more displacement

Fits: All Chainsaw makes

General description: Basic Mill (G778) and 36-inch Handle and Rail Set (G781-36): Tubular Aircraft aluminum extrusion and zinc-plated steel parts. Instruction manual & assembly hardware. High-quality U.S. made aircraft aluminum and steel. MADE IN THE USA.

Use description: This versatile, heavy-duty chainsaw lumber mill accurately cuts planks and beams up to 32” wide and 1/2” to 13” deep. Clamps onto your chainsaw bar with no drilling required. Lightweight and portable, enables user to mill lumber where the tree falls. No previous experience required! New CNC-Machined billet end brackets! (See photo) These new end brackets are more accurate, easier to adjust, create less vibration than the old die cast version and are virtually unbreakable. Perfect for homeowners, woodworkers, arborists and sawyers. Optimal results will be had when used in conjunction with Granberg ripping chain and first cut platforms.
PLEASE NOTE: Using this mill with a bar of 22 inches and less may affect compatibility with G850 Slabbing brackets, as the available cutting width will be less than the width of slabbing brackets (16″).
P65WARNING

Details
Out of stock

Shop Fox M1011 24-Inch Box and Pan Brake

$595.00

This pan and box brake is an indispensable tool if you need to increase the strength of sheet metal plates with bends, or you intend on fabricating more complicated brackets, gussets, boxes, or fixtures. The Model M1011 bends mild steels up to 20 gauge thick, 24-inches wide, and ranging in angle from 0 to 135-degrees. The removable and adjustable fingers can be installed in a variety of positions to accommodate varying widths of metal.
Quick indexing of one or many fingers makes this the perfect machine for multiple applications. Achieve extremely sharp bends and easily adjust the fingers closer or farther from the point of bend.

Heavy Duty Hold Down Clamp Lever

Bending sheet metal is a breeze with the M1011. The heavy duty hold down clamp lever allows for clamping and unclamping the sheet metal through the cam mechanism. This machine is built to take on any serious bending work.

Details
Out of stock

Delta 10″ Sliding Miter Saw Dual Bevel – Cruzer 26-2310

$599.90

Just Released, Improved Design 11/23

Military Grade Aluminum Arms, sealed bearings for smooth operation and accuracy.

Shawdowline Worklight. Lights work area and casts cut line even in bright outdoor light.

18 Inch crosscut capacity for wide stock.

Upfront Bevel and miter controls. Indents at all popular miter and bevel angles

NO RAILS Allows unit to be located against the wall in the workshop

Details
Out of stock

DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard

$599.95

The DELTA 34-976 Deluxe Uniguard Table Saw Blade Guard fits DELTA 10-inch Unisaws and Contractor's Saws, and has an innovative, overhead design that doesn't have a mounting bracket behind the blade to interfere with dado cutting or molding operations. The operator remains protected for non-through cutting operations since the blade guard doesn't have to be removed. For through-cutting, the guard has a removable splitter with anti-kickback pawls that afford the operator additional safety. With a U-shaped support arm, you'll be able to cut the full capacity of the fence; you can also keep half the guard elevated for use of a push stick when cutting with the fence close to the blade. The Uniguard Table Saw Blade Guard comes includes the guard, splitter, table mounting bracket, support arm and extension.

Details