Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com

Shop

/Shop
  • Out of stock

    Tormek T-8 Chef’s Kit Tormek T-8 Original Sharpener + KJ-45 Centering Knife Jig

    $1,295.00
    This bundle combines the Tormek T-8 water-cooled sharpening system with the jigs trusted by chefs around the world.
    This Tormek T-8 Chef's Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, and the SVM-00 for small knives. Also included is the SVX-150 for your scissors. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy.
    The Tormek T-8 is Tormek’s most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
    Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, TT-50 Truing Tool, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
    Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine.
    Details
  • Out of stock

    Makita LS1219LX 12″ Dual-Bevel Sliding Compound Miter Saw with Laser and Stand

    $1,295.90

    The Makita 12” Dual-Bevel Sliding Compound Miter Saw with Laser and Stand (model LS1219LX) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (6-3/4”) and crown molding (8” nested). It will also make 15” crosscuts at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0° to 48° (left and right).

    The saw is powered by a 15 AMP direct drive motor with soft start, a key point of difference. Direct drive enables smoother start-ups and consistent, constant power with no belts to slip or replace. The electric brake provides added convenience. In addition, the electronic speed control maintains constant speed under load for smoother, higher-quality cutting.

    Additional features include a high-quality 60T carbide-tipped blade, and a see-through blade guard system for greater visibility of the blade and line-of-cut. The built-in laser indicates the line-of-cut whether the blade is turning or not, and offers micro-adjustments for precise “left-of-blade” or “right-of-blade” cutting. It has dual dust collection ports for improved dust collection capability for use with a bag (included) or vacuum (sold separately). It also has a large-sized aluminum base that improves the stability of cutting stock for more efficient cutting.

    Model LS1219LX is a kit and includes a 33.7 lb. compact folding stand with transport wheels and a side handle for easier job site portability.

    • Unique 2-Steel Rail Sliding System design offers single slide-glide operation
    • Increased capacity for up to 8" crown molding (vertically nested), 6-3/4" baseboard (vertical), and 15" crosscuts at 90°
    • Includes a durable compact folding stand with transport wheels and a side handle for easier job site portability; features an aluminum tubular design weighing only 33.7 lbs.
    • In-front bevel lock for convenient operation
    • Dual dust collection ports provide excellent dust extraction performance
    • Material support extensions of the stand extend 100-1/2"; supported up to 500 lbs. for increased cutting efficiency
    • Innovative direct drive motor and guard system is engineered for increased vertical cutting capacity (6-3/4")
    • Linear ball bearing system engineered to deliver "dead-on" accurate cuts
    • Less weight (65 lbs.) and the most compact design in its class for easy jobsite portability
    • Powerful 15.0 AMP direct drive motor requires less maintenance and delivers 3,200 RPM
    • Large-sized aluminum base improves stability of material for efficient cutting
    • Soft start suppresses start-up reaction for smooth start-ups and longer gear life
    • Miters 0-60° left and right; bevels 0-48° left and right
    • Positive miter stops at: 0°, 15°, 22.5°, 31.6°, 45°, and 60° left or right
    • Electronic speed control maintains constant speed under load for smoother, higher quality cutting
    • Integrated upper and lower 5-1/2" tall fence system offers added rigidity for more precise miter and bevel cuts
    • Built-in laser clearly indicates line-of-cut whether blade is turning or not; on-off switch and micro-adjustments for precise "left-of-blade" or "right-of-blade" cutting
    • Ergonomic rubberized horizontal D-handle design for better fit and added comfort
    • Replaceable stainless steel miter scale features large and easy-to-read markings
    • Easy-to-read dual bevel scale for more precise adjustments
    • See-through blade guard system for greater visibility of blade and line of cut
    • Easy blade changes for increased efficiency
    • Oversized trigger switch for better fit, added comfort and easier operation
    • Easy one-touch slide lock for convenience
    • Simple 90º turn-of-the-knob miter angle lock/unlock mechanism
    Details
  • Out of stock

    Ashley Hearth 1,200 Sq. Ft. Pedestal Wood Stove AW1120E-P

    $1,299.00
    The Ashley Hearth Products AW1120E-P is a beautiful air tight plate steel wood burning stove with nickel-pewter trim that accents a charcoal black finish. A heavy cast iron door with air washed ceramic glass allows a magnificent view of the burning fire that will enhance any hearth setting. The AW1120E-P wood stove meets the stringent requirements of the EPA “Step 2″ 2020 Certification Guidelines. This wood stove has 68,000 BTUs that can heat up to 1,200 square feet. The Ashley AW1120E-P burns logs up to 18” in length while the pedestal base provides an elegant touch to any room. Here’s how it works: the primary air inlet at the front of the stove ignites the wood upon start up. Once burning, the secondary air inlet at the rear of the firebox feeds air to the top of the stove through three (3) ignition tubes directly above the wood. The result is that you have ignition, or fire, at the bottom and at the top of the wood stove which, in effect, consumes the wood. This is a very efficient method of getting the most energy possible out of the wood that you are burning. Blower sold separately (model CB36 or B36) The AW1120E-P model replaces the previous Vogelzang models TR001, TR001B, TR001WS and APS1100 wood stoves.  
    default.jobtemplate.hls.m3u8
    Details
  • Sale!
    Out of stock

    Grizzly Industrial G0860 1-1/2 HP Portable Cyclone Dust Collector (Used)

    Original price was: $1,395.00.Current price is: $1,299.99.

    Customer return. Dings, dents, scratches, chipped paint, bent brackets, filter screen dent.

    G0860 1-1/2 HP Portable Cyclone Dust Collector

    For the shop tight on space needing a portable dust collector.

    The G0860 1-1/2 HP Portable Cyclone Dust Collector features an impressive 868 CFM and up to 9.7" of static pressure, creating a vortex of incoming air that extracts heavy wood chips and large dust particles into a plastic-bag-lined steel drum. The remaining fine dust travels past the 12-3/4" aluminum impeller, is caught by a canister filter and then deposited in a separate plastic collection bag. The spun-bond polyester filter catches 99.9% of particles to 1-micron in size and is pleated to provide maximum surface area for efficient air flow. A turn of the crank handle rotates the paddle brushes, knocking caked-on dust off of the pleats to keep your CFM as high as possible. The collection drum features a quick-release handle that makes it easy to roll it out for sawdust disposal. This cyclone has a normal operating sound range of 78 dB, slightly quieter than a telephone dial tone.

    A great value for the price and an upgrade over any single-stage unit.

    Replacement T30314 Filters are available. The upgraded T30489 HEPA Filters are also available for those wanting to capture particles down to 0.3 microns. Like all Grizzly machines, the G0860 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The G0860 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your two-stage dust collection system. The Grizzly Customer Service and Technical Support Teams are U.S. based. Made in an ISO 9001 factory

    SPECIFICATIONS

    • Motor: 1-1/2 HP, 110V, single-phase, 15A
    • Intake hole size: 6"
    • Impeller: 12-3/4" aluminum
    • Airflow capacity: 868 CFM @ 1.8" SP
    • Max static pressure: 9.7"
    • Filtration: 1-micron
    • Filter surface area: 28.1 sq. ft.
    • Collection size: 20-gallon drum
    • Sound rating: 78dB
    • Overall dimensions: 27-1/2" W x 44" L x 70" H
    • Approximate shipping weight: 278 lbs.

    FEATURES

    • Collection drum with quick-release handle for easy disposal
    • Two-stage operation for ultimate dust collection
    • Swivel casters
    • Lift handle and roll drum for easy sawdust disposal
    • Pleated filter with paddle brushes and crank handle for max air flow efficiency
    • Vacuum equalizer built into collection drum for use with disposable plastic bags
    • Wireless remote control

    Unit sold as is.

    Details
  • Out of stock

    12′ Live Edge Walnut Slab

    $1,325.00
    Beautifully finished American Walnut live edge slab. Stunning conversation piece suitable for use
    in any room of your house or office.
    • Plain sawn, perfectly flat. Stabilized
    • Approximate size 12' x 2' x 1.375" (approximate because the live edges are rugged and irregular in shape and dimensions). 
    • Stunning live edge
    • 100% handcrafted in U.S.A. Thoroughly protected
    • Satin polyurethane finish
    • Actual photo of finished slab you will receive.
    • End crack(s) longest approx 23" 
    • Show room model, faint scratches
    • Optional thick & sturdy black finish metal legs complete the look in a simple yet appealing way (cost $490 set of 2)
    • Free delivery within New England
    • Outliers please ask for freight quote.
    Details
  • Out of stock

    Ashley Hearth 2000 Sq. Ft. Pedestal Wood Stove AW2020E-P

    $1,349.00
    The Ashley Hearth Products AW2020E-P wood stove is a medium size plate steel wood stove with outstanding heating capabilities. This unit will heat up to 2,000 sq. ft. of your home with 89,000 BTUs of heat from America’s oldest sustainable resource, wood. The spacious 2.0 cubic foot firebox will accept logs up to 21″ in length, increasing burn time and decreasing time spent refueling the stove. This stove meets the stringent requirements of the EPA “Step 2” 2020 Certification Guidelines. The AW2020E-P is mobile home approved for USA only. This is a testament to the AW2020E-P’s efficiency, safety, and low environmental impact. Not only does the AW2020E-P have a low carbon footprint but it also has an elegant, larger glass door that provides ease of loading logs up to 21 In. in length. The AW2020E-P model replaces the previous US Stove Company models 2000 and 2016EB wood stoves.
    default.jobtemplate.hls.m3u8
    Details

  • Fein Circular Saw Blade For Pipe Milling Machines 63502080008

    $1,350.00
    HSS, with carbide teeth, for gearbox type: b – for machining cast iron pipes (including those with cement chucks) and for machining non-alloyed steel pipes up to 400 N/mm2.
    Add to cart Details
  • Out of stock

    MAKITA XUC01X1 LXT® Brushless Power-Assisted Wheelbarrow

    $1,375.00
    • BrandMakita
    • MFR #XUC01X1
    • UPC #
      088381856423
    • Country of OriginChina

    Dimensions

    Brake Dia. 7 in
    Tray Width 31 1/8 in
    Tray Length 51 1/2 in
    Wheel Dia. 15 1/2 in
    Axle Dia. 7 in
    Wheel Width 4 1/4 in
    Tray Depth 35 1/2 in
    Wheel Diameter 15 1/2 in
    Brake Diameter 7 in
    Axle Diameter 7 in
    Details

  • Saw Trax Panel Saw Kit w/ Fixed Universal Plate – 52in. Model 52KT

    $1,390.00
    • Attach Saw Trax's KT52 52" Panel Saw Kit to your own custom-built frame or mounting to convert your circular saw into a panel cutting workhorse at a fraction of the cost of commercial panel saws!
    • Accommodates a 7.25" circular saw (not included).
    • Kit includes cross-cut guide tubes, guide tube support brackets and hardware, carriage, and universal saw plate. Saw plate can be easily swapped out for a router mounting plate (not included).
    • Guide tubes are made of 1/8" wall steel with powder-coated support brackets.
    • Current generation steel carriage features sealed roller bearing system for long-lasting performance and smoother, more accurate tracking than old-style systems.
    Add to cart Details
  • Out of stock

    King 2200 Sq.Ft. King Mini Pellet Stove w/ 20 lb Hopper & Remote 5501S

    $1,395.00

    Good things come in small packages and the US Stove 5501S pellet stove is sure to continue that tradition. By combining a full size burning system with a small cabinet and hopper, the 5501S combines the best of both worlds. It can heat up to 2,200 sq. ft. yet its small footprint and clearances allow it to fit easily into smaller areas. Upgraded digital controls with a remote control make this stove easy to adjust. The ceramic glass window comes with an air wash system to keep the fire viewable. The 20 LB. hopper provides up to 13 hours of burn time and because of its size, you will get fewer auger jams due to collapsed pellets. Pellet heaters work by using a software driven control board to precisely deliver a predetermined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home.

    default.jobtemplate.hls.m3u8

    Details
  • Out of stock
    Delta 31-482 6 in X 89 in Oscillating Edge Sander Delta 31-482 6 in X 89 in Oscillating Edge Sander

    Delta 31-482 6 in X 89 in Oscillating Edge Sander

    $1,395.00
    6-Inch by 89-Inch Oscillating Edge Sander; 1 1/2 Hp, 115/230V (wired 230V) 1 phase motor; Oscillating belt 108 OPM; Belt Speed 3,900 FPM; Cast Iron tilt table; Cast iron Contour Sanding Table; Fence; Dust Hood; Miter Guage; Backstops & Tracking Tool. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
    • Precision ground steel platen with graphite pad eliminates distortion and extends belt life
    • Aggressive, powerful sanding system for quick material removal in vertical or horizontal positions and any bevel position in between
    • Backed by a 5 year warranty
    [/fusion_checklist]
    Details

  • Fein Circular Saw Blade For Pipe Milling Machines 63502084002

    $1,399.00
    HSS, with carbide teeth, for gearbox type: b – for machining cast iron pipes (including those with cement chucks) and for machining non-alloyed steel pipes up to 400 N/mm2.
    Add to cart Details
  • Out of stock

    10-205 RIKON 10″ Contractor Saw w/Steel Wings

    $1,399.90
    The 10” Left Tilt Contractor Table Saw 10-205 is a no-nonsense machine whose simplicity is the strength behind its popularity with home craftspeople and professional workshops. Operating this table saw is straight forward – blade controls are large and easy to access, box-type rip fence sets accurately,
    Dual table ‘T’ slots give great options for use of miter gauges and other jigs, blade changes are easy, blade guards and control switch with large ‘off’ paddle add excellent safety measures to the user, and the built-in mobile base allows moving the saw around the shop easy. Wired for use with 3-wire 120V receptacles.
    • Powerful 1-3/4 HP, 1Ph, 120/240V, 3450 RPM motor • Industrial quality, multi-ribbed flat J-belt for smooth power transfer • Precision machined cast iron table top and wings • Dual table ‘T’ slots for use with miter gauges and jigs • Magnetic table insert removes without tools • Clear blade guard with riving knife/splitter for extra user safety
    Details
  • Out of stock

    JESSEM Mast-R-Lift Excel II Included Complete Router Table System

    $1,453.99
    • Includes JessEm Mast-R-Lift Excel II for most cylinder router motors
    • 32" x 24" phenolic table with aluminum extruded miter track & T-track
    • Extruded aluminum router table fence with fully adjustable fence faces
    • Rigid, heavy-duty steel stand with upper and lower stretchers
    • Optional Digital Readout Attachment and Pow-R-Tek Remote Power Switch not included
    Details
  • Out of stock

    Shop Fox W1706 1 HP 14″ BANDSAW & CABINET STAND

    $1,485.00
    Features such as extruded-aluminum fence and rails, quick-release blade tension, miter gauge, upper and lower ball bearing blade guides, enclosed cabinet stand, hinged wheel covers, 4" dust port, and a 1 HP motor are all standard. And, with its cast -iron frame and table, this bandsaw will be a reliable shop fixture for many years to come. An optional 6" extension block kit (D3348) is also available. CSA certified meeting CSA and UL standards!

    Specifications

    • Motor: 1 HP, 110V/220V, prewired 110V, single-phase, TEFC, 1725 RPM, 11A/5.5A
    • Blade size: 93-1/2" (1/8" to 3/4" wide)
    • Precision-ground cast-iron table size: 14" x 14" x 1-1/2"
    • Cutting capacity (throat): 13-1/2"
    • Max. cutting height: 6"
    • Table height above floor: 43"
    • Blade speeds: 1800 & 3100 FPM
    • Cast-iron frame and wheels
    • Table tilt: 45° right, 10° left
    • Precision-ground cast-iron table
    • Cast-iron blade wheels
    • Deluxe extruded-aluminum fence
    • Ball-bearing blade guides
    • Footprint: 18"W x 15-1/2"D
    • Heavy-duty cabinet-type stand with storage space
    • Quick-change blade release/tensioning
    • Upper and lower ball bearing blade guides
    • All ball bearing construction
    • 4" dust port
    • Includes one 3/8" blade, fence and miter gauge
    • Fence scale with magnifying window
    • Approximate shipping weight: 275 lbs.
    California Proposition 65 Warning
    Details
  • Out of stock

    Live Edge Cherry Slab 12.75′

    $1,495.00
    Beautifully finished long cherry live edge slab. Stunning conversation piece suitable for use
    in any room of your house or office.
    • Plain sawn, perfectly flat. Stabilized
    • Approximate size 153" x 24" x 2.5" (approximate because the live edges are rugged and irregular in shape and dimensions). 
    • Stunning live edge
    • 100% handcrafted in U.S.A. Thoroughly protected.
    • Satin polyurethane finish
    • Actual photo of finished slab you will receive.
    • Show room model, faint scratches
    • Optional thick & sturdy black finish metal legs complete the look in a simple yet appealing way (cost $490 set of 2)
    • Free delivery within New England
    • Outliers please ask for freight quote.
    Details
  • Out of stock

    Shop Fox W1755S 6″ Jointer w/Spiral Cutterhead

    $1,569.00
    Details
  • Sale!
    Out of stock

    Grizzly G0771Z – 10″ 2 HP 120V Hybrid Table Saw w T-Shaped Fence

    Original price was: $1,795.00.Current price is: $1,590.00.
    This hybrid is a selective blend of the best features of the contractor-style table saw and cabinet style table saw. Like the cabinet saw, it has an enclosed cabinet with 4" dust port, heavy-duty cast iron trunnions that mount to the cabinet, and plenty of power (with its 2 HP motor) to easily rip through hardwoods or cut dadoes. Like the contractor-style saw, it's still light enough to move around (it weighs approximately 286 lbs. when fully assembled) and it's easy on the budget. The fence on this machine is also a hybrid of some of the best features we've had on table saws in the last 30+ years. It has the easy lift-off and simple adjustability of the popular T-shape Shop Fox® Classic fence, the rock-solid front locking ability of the Shop Fox® Original fence, and the accessory T-slots of the Shop Fox® Aluma-Classic fence. To top it all off, this saw features an innovative quick-release blade guard and riving knife system that can be changed in seconds—and it's prewired to run on an ordinary 120V, 20A circuit! ETL listed meeting UL 987 8th Edition and CSA C22.2 #71.2 standards! Made in an ISO 9001 Factory SPECIFICATIONS:
    • Motor: 2 HP, 120V/240V (prewired 120V), single-phase, 15A/7.5A
    • Rip capacity: 31" right, 16-3/4" left of blade
    • Max. depth of cut @ 90°: 3-1/4"
    • Max. depth of cut @ 45°: 2-1/4"
    • Table size with extension wings: 40-1/2" W x 27" D
    • Distance from front of table to center of blade: 15-1/2"
    • Floor-to-table height: 35-3/8"
    • Arbor diameter: 5/8"
    • Arbor speed: 3450 RPM
    • Max. width of dado: 13/16"
    • Overall dimensions: 64" W x 40-1/4" D x 35-1/2" H
    • Footprint: 21" L x 19-1/2" W
    • Approximate shipping weight: 330 lbs.
    FEATURES:
    • Cast-iron table and extension wings
    • Cast-iron trunnions
    • Easy-glide fence system
    • Quick-release blade guard & riving knife
    • 4" Dust port
    • T-slot miter gauge
    • Beveled front table edge
    Details

  • South Bend 2HP Canister Dust Collector (SB1100)

    $1,599.00
    The South Bend SB1100 2 HP Canister Dust Collector is the perfect mid-sized dust collector for serious hobbyists and professionals alike. It can be connected to up to three machines running simultaneously—either as a stationary unit, or with its locking swivel casters, easily moved around as a point-of-use machine. Its 2 HP motor, 33-1/2 gallon collection capacity, and high-end features not found on typical dust collectors sold by other brands will help keep the air and surfaces in your shop dust free.

    FEATURES:

    • Remote controlled magnetic switch
    • 1-Micron canister filters with 6 times the surface area of regular filter bags
    • Vacuum gauge that indicates when filter needs to be cleaned or replaced
    • Motorized filter paddle brushes that automatically clean the filter at regular intervals
    • Steel stand with built-in locking casters
    • Clear disposable plastic collection bags
    Add to cart Details
  • Out of stock

    Rikon 10-324TG 14″ Bandsaw

    $1,599.99
    14” Bandsaw 10-324TG is RIKON’s most popular model due to its many professional features – including tool-less blade guides, a quick release blade tension lever, large adjustment handles, hinged safety blade guard with sight window, high work table height, and base stand with storage shelf.
    Its dual voltage, 1-1/2HP motor provides ample power for most every work encountered. Pre-lubricated, sealed thrust and side ball bearing guides give smooth blade support during difficult cuts. Includes 6″ tall rip fence with re-saw bar. Wired for use with 3-wire 115V receptacles.
    • Rugged welded steel column and frame • Balanced cast aluminum drive wheels • Resaw Capacity 13″ • Dual blade speed ranges – 1445 / 2950 FPM • Machined cast iron table with miter gauge ‘T’ slots • Quick-release blade tension system • Rack and Pinion upper guide adjustments • Dependable 1.50HP 60Hz motor
    Details

  • Shop Fox W1837 10″ 2 hp Open-Stand Hybrid Table Saw

    $1,599.99
    A feature-packed Table Saw for shop owners who don't need all the heft and horsepower (and extra cost) of a true cabinet saw. This Hybrid Table Saw features cabinet-mounted trunnions and an enclosed steel upper-stand for maximum dust containment. Despite its hybrid design, cutting capacities stand toe-to-toe with the most expensive cabinet saws in the market and the interchangeable riving knife offers protection for non-through cutting operations that require removal of the blade guard. Also features a serpentine belt and pulley system for smooth and quiet operation with better power transfer than a standard V-belt drive system. This saw is sure to be the envy at any shop or worksite.
    Add to cart Details

  • Sjobergs SJO-33279 Scandi 1825 Work Bench

    $1,600.00
    The Sjobergs Scandi Plus 1825 is the perfect bench for the discerning woodworker. The top, made of beech, has two double rows of bench dog holes working from each vise. You can use the holdfast in all the dog holes on the top and in the trestle.
    Add to cart Details
  • Out of stock

    Makita PDC1200A01 ConnectX™ 1,200Wh Portable Backpack Power Supply

    $1,629.00

    The ConnectX™ Portable Backpack Power Supply (PDC1200A01) is a high-capacity backpack that delivers 1200 watt hours of output. It provides longer run time to last an entire workday. Actual run times vary by product, application, and workday amount. It works with 36V (18V X2) LXT (adapter included) and 40V max XGT (adapter sold separately) systems.

    It is durably constructed, IPX4-rated for weather resistance. The battery box can be detached from the harness and to be used a stationary power supply. It features a flat base, allowing the product to stand upright. There is an integrated carrying handle for convenience.

    An L.E.D. battery charge level indicator allows the operator to monitor battery charge. The power supply reaches a full charge in 3 hours (AC power supply included).

    Details
  • Out of stock

    Grizzly G0771Z – 10″ 2 HP 120V Hybrid Table Saw with T-Shaped Fence

    $1,629.99

    The best features of the contractor and cabinet saws combined.

    The G0771Z 10" 2 HP Hybrid Table Saw blends the best features of the contractor-style table saw and cabinet-style table saw. Like the cabinet saw, it has an enclosed cabinet, heavy-duty cast-iron trunnions that mount to the cabinet and plenty of power to easily rip through hardwoods or cut dadoes. Like the contractor-style saw, it's still light enough to move where you need it and it's easy on the budget. The fence on this machine is also a hybrid of the best features we've had in the last 30+ years. These all-time best features include the easiest lift-off and simple adjustability of one fence, the rock-solid front locking ability of another and the accessory T-slots of a third. The research and development put into this finished fence creates a simpler and more enjoyable user experience. The G0771Z features an innovative quick-release blade guard and riving knife system that can be changed in seconds. A 4" dust port is integrated into the steel cabinet-type stand for maximum dust collection. The precision-ground cast-iron table exceeds 40" with the extension wings. To top it all off, it's prewired to run on an ordinary household 120V, 20A circuit! Like all Grizzly table saws, the G0771Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0771Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your saw. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the table saw are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. ETL certified Made in an ISO 9001 factory SPECIFICATIONS:
    • Motor: 2 HP, 120V/240V (prewired for 120V), single-phase, 15A/7.5A
    • Rip capacity: 31" right, 16-3/4" left of blade
    • Max. depth of cut @ 90°: 3-1/8"
    • Max. depth of cut @ 45°: 2-1/4"
    • Table size with extension wings: 40-1/2" W x 27" D
    • Distance from front of table to center of blade: 15-1/2"
    • Floor-to-table height: 35-3/8"
    • Arbor diameter: 5/8"
    • Arbor speed: 3450 RPM
    • Max. width of dado: 13/16"
    • Dust port size: 4"
    • Overall dimensions: 64" W x 40-1/2" D x 36" H
    • Footprint: 21" L x 19-1/2" W
    • Approximate shipping weight: 330 lbs.
    FEATURES:
    • Cast-iron table and extension wings
    • Cast-iron trunnions
    • Easy-glide fence system
    • T-slot miter gauge
    • Beveled front table edge
    • Includes a 10" x 40T carbide-tipped saw blade
    Details
© 2015 CT Power Tools | All Rights Reserved
Facebook