-
Ironworker Max Force (Tons) 50 Oil Capacity (Gal.) 7 Speed (Strokes/Minute) 23 Throat Depth (In.) 7-1/2 5 Motor HP Hydraulic Pressure (PSI) 2500 Voltage 230 1 Phase 23 Amps Punching Station Pedestal Die Table Flat Bar Shear Angle Shear Universal Open Tooling Station Metalworking -
Out of stock
- Wide assortment of finger widths allow greater versatility in the shop
- With fingers installed it can be used as a full-length nose bar, turning the Machine into a straight bending brake
- All body sections are welded Steel plate with heavy truss rods and braces designed to give greater strength and durability
- Both the bed and apron are bored in line to assure the utmost accuracy
- Counter weights can be moved up or down to adjust desired leverage
-
Door builders and cabinet shops will love the extra capacity of this 37" wide-belt sander. Available with 15 HP 3-phase sanding motors, these wide-belts are built for daily industrial use with features such as a heavy-duty steel cabinet, pneumatic belt oscillation, and a built-in air filter/regulator. The digital control pad automates table adjustments and is accurate to 0.005". Also, the variable-speed conveyor, adjustable oscillation controls, and adjustable graphite/felt platen easily allow the operator to find the perfect combination of settings to achieve soft, smooth finishes on all types of wood. -
Ironworker Max Force (Tons) 62 Oil Capacity (Gal.) 7 Speed (Strokes/Minute) 23 Throat Depth (In.) 8-7/8 5 Motor HP Hydraulic Pressure (PSI) 2500 Voltage 230 3 Phase 14 Amps Punching Station Pedestal Die Table 14 in Wide Flat Bar Shear Angle Shear Coper Notcher Metalworking -
With a fully automatic feeding, cutting and lifting cycle this saw steps productivity up to the next level. The hydraulic vise uses a built-in power feed system to feed material to the desired length determined by a fine tunable sensor. Simply set your cut length, set the desired number of cuts and blade speed, load your material, and press start-the G0886 does the rest! With an impressive 12" x 14" capacity and powerful 3 HP, 3-phase motor, the G0886 has the capabilities to process some serious material. The workhorse also features a built-in 6 1/2 gallon coolant tank and full wrap catch basin to ensure coolant stays where it belongs. Perfect for cutting heavy steel or aluminum stock, you can quick and easily adjust downward feed rate to help maximize blade life. This saw truly does it all! Note: Stock must be at least 1" tall for auto feed to work. -
Out of stock
Jet Vertical Milling Machines perfrom slot and keyway cutting, planning, drilling, diesinking, rebating and routing with surgical accuracy. With the addition of the Acu-Rite 200S 2 axis digital readout makes this unit readily useable for most applications. -
Out of stock
10 Horsepower 3-Phase 24" Wide Belt Wood Sander with Pneumatic Oscillation Control
These machines were developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. This collaboration resulted in the introduction of the G9962Z & G9962ZX, which have become the "staple" of the guitar building industry. The main features that enable these sanders to process short pieces efficiently are the single drum and double infeed and outfeed pressure rollers positioned close to the drum. The result is a continuous downward pressure on extremely thin stock as short as 9", which is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of hard rubber to prevent distortion of thin stock while sanding. Features include digital read out, powered table elevation, variable speed conveyor, disc brake stopping system, pneumatic belt tracking, pneumatic belt oscillation, and separate motors for the drum, feed rollers, and table elevation. -
Out of stock
Description
Numeric control pad and digital readout provide the ultimate in precision. Other features include quick-change belt system with automatic belt tensioning, air-controlled automatic belt tracking system, motorized table elevation control, adjustable air-controlled belt oscillation system, and load meter. Certified to CSA and UL standards.Specifications
- Sanding motor: 10 HP, 220V, single-phase, 1725 RPM, 50A
- Feed motor: 1 HP, 220V, single-phase, 1725 RPM, 7A
- Elevation motor: 1/3 HP, 220V, single-phase, 1725 RPM, 3A
- Drum speed: 3550 FPM
- Drum diameter: 8"
- Feed rate: variable, 15–49 FPM
- Max. stock width: 24"
- Max. stock thickness: 6"
- Min. stock thickness: 1/8"
- Required air pressure: 75 PSI @ 7 CFM
- Sanding belt size: 25" x 60"
- Dust port: (2) 4"
- Emergency stop bar with brake
- Manual and motorized table elevation control
- Sanding load meter
- Digital readout and controls
- Made in an ISO 9001 factory
- Footprint: 39-1/4"W x 19-1/4"D
- Height with dust ports: 71"
- CSA certified meeting CSA C22.2 #105–1953 and UL 987–7 standards
- Approximate shipping weight: 1870 lbs.
California Proposition 65 Warning
-
G0603X 25" 15 HP 3-Phase Extreme Duty Planer w/ Helical Cutterhead
Precision planing with digital control.
The G0603X 25" 3-Phase Extreme Duty Planer has an incredible 15 HP motor to make quick work of those big planing jobs. The G0603X features a unique helical cutterhead with 170 inserts rotated at 15° for smooth shearing cuts - meaning you can say goodbye to tear-out - while having an ultra-quiet machine and a smoother finish. The digital controls to allow you to simply enter the thickness of the board you want or the amount you want to remove, which saves time and reduces waste. All controls are conveniently located. The segmented chip breaker leads directly into the dust hood with a 5” dust port to help ensure the work area stays as clear as possible. And because it's a Grizzly Extreme Series®, you can be assured that your machine will provide years of reliable service. Like all Grizzly planers, the G0603X comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0603X manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS:- Cutterhead motor: 15 HP, 220V/440V*, 3-phase, 37A/18.5A
- Table elevation motor: 1/2 HP, TEFC, 2.4A/1.2A
- Table size: 25" W x 57" L
- Maximum cutting width: 25"
- Maximum stock thickness: 9"
- Maximum cutting depth: 1/4"
- Minimum stock thickness: 1/4"
- Minimum stock length: 10"
- Feed rate: 20, 25 & 30 FPM
- Cutterhead: 6-row helical, 170 inserts
- Cutterhead speed: 4900 RPM
- Power transfer: Triple V-belt
- Overall size with infeed/outfeed tables: 60-1/4"H x 57-3/8"W x 54-3/8"D
- Approximate shipping weight: 2054 lbs.
- Segmented chip breaker
- Precision-ground cast-iron table
- 5" dust port
- Micro-adjustable table height
- Infeed roller is serrated steel
- Outfeed roller is finely finished steel
- Digitally controlled table elevation for extreme accuracy
- Adjustable bed rollers
- Easy access cutterhead
- 3-Speed (20,25,30) feed Rate
- Inch/metric readout
- Emergency stop button*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $250. Please contact Grizzly Technical Support at (570)546-9663 before placing your order.
-
Out of stock
The Grizzly Industrial G0445-24" 10 HP 3-Phase Platen Type Wide-Belt Sander machine was developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. The main features that enable it to process short pieces efficiently are the single drum and the double infeed and double outfeed pressure rollers that are tucked in closer to the drum. The result is that you have continuous downward pressure on extremely thin stock as short as 14" (G0582). That is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of harder rubber to prevent distortion of thin stock while sanding. The new platen model will sand stock as short as 9" (G0445). All of these models include features like digital read out, powered table elevation, four screw jacks for table support, variable speed, disc brake stopping system, dust proof photo electric eye/pneumatic control for belt oscillation, and separate motors for the drum, the feed rollers, and the table elevation. -
Out of stock
FEATURES: • Dual mitering allows for compound angle cutting of 60° right and 45° left • Tungsten carbide blade guides with precision bearings, stabilizes the blade for increased accuracy and extendes blade life • Large handwheel with blade tensioning gauge acurately measures blade pressure • For added safety, the EHB-1018VM Bandsaw follows strict guidelines and electrical requirements to be certified by CSA Group • Quick positioning vise for clamping of materials • The Elite swing away panel relocates saw controls to a single location, offering finger-tip operation of most major saw functions. • Semi-automatic bow raises after cut to predetermined height • Automatic blade breakage sensor detects accidental breakage and interrupts the power • Heavy-duty construction reduces vibration and deflection • Blade is fully guarded for operators safety -
Out of stock
Built with a 2 hp motor, hydraulically controlled back roll, and a steel frame, this electrical plate roller lets you tackle thicker gauges without getting bogged down. It comes with a DRO.- 4’ forming width.
- Bends 13 gauge mild steel over its whole width.
- 2 hp motor runs on 220-volt single-phase power, so you can use it almost anywhere.
- Convenient control pedestal has forward and reverse foot pedals and buttons to control the up and down movement of the back roll.
- Industrial-grade hydraulic system allows the back roll to move up and down and tilt left and right for coning.
- Digital readout gives the position of the back roll for easy repeatability.
- Full steel frame, machined to exacting tolerances, maintains accuracy for many years of use at full capacity.
- Includes 3 wire grooves for forming rings.
- Emergency stop cable on the front and back of the machine for safety.
