-
Out of stock
The PM2000 Table saw sets a new standard for innovation with an array of patented features and massive body design. The cast iron tables are oversized, and the newly designed Arbor Lock lever is accessible from above the Table top to eliminate the need for dual Arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale features an integrated digital read out as well as adjustable angle indicators for repetitive bevel cuts. The newly designed integrated retractable hydraulic caster system mobilizes your Table saw much higher than the previous model to assist when moving over thresholds. A wide stance, heavy-duty box TRUNNION and concave teeth on the TRUNNION gears promote easier raising and tilting of saw blade. Poly-v drive belt system results in quieter, more efficient power transfer from the motor to the Arbor with virtually No vibration and less heat build-up. Improved built-in dust Collection port with convenient access to the inside of the saw cabinet for simple clean-up. The saw has a proprietary safety switch with magnetic interlock and the stop button can be knee activated. -
Out of stock
This 20”-widehelical head thickness planer can quickly turn rough lumber into boards with smooth faces. Heavy cast iron and steel constructionkeeps the material steady and supported.- 5 hp motor turns the cutter head at a whopping 5,000 rpm.
- Straight 4-row helical head cutter comes standard.
- Runs on 220-volt single-phase power, so it can work almost anywhere.
- Fully cast iron 20” x 25.75” table with 15” extensions can expand to an impressive 20” x 55.75”.
- 2 speedsallow you to pick what’s right for your project:
- 20 feet per minute when you need to smooth boards in shorter amount of time.
- 16 feet per minute when you want a more refined finish or you’re working with tougher material.
- 8” maximum and .25” minimum cutting height.
- Maximum ⅛” cut depth.
- Handwheel with a scale on the side of the planer lets you precisely adjust the height in seconds.
- Cast iron frame on the top and bottom stabilizes the machine and helps it last longer.
- Magnetic safety switch automatically turns the machine off in case of a power outage or a problem with the current.
- Anti-kickback fingers grip the material so it’s less likely to shoot back out if the blades get jammed.
- Extra-large 5” dust port prevents clogging. You can easily hook up your dust collection system, so your shop stays clean with breathable air.
- Built-in wheels on the base allow you to move the machine around your shop and store it.
- Covered by a 1-year parts warranty.
- Replacement parts are in stock at our Wisconsin warehouse for fast shipping.
- Lifetime technical support by phone means that you can call our team of experienced woodworkers whenever you have questions or need troubleshooting.
-
The Sign Package includes;- the Makita 5007F saw with 2 L.E.D. lights that illuminate the line of cut,
- a spinning insert for fast changes from vertical to horizontal cutting,
- a dust collection system that uses a dust brush and an over-sized 2.5″ hose to evacuate the dust,
- a pivoting OLFA razor knife that uses segmented snap off blades for fast sharpening,
- a variable tension spring hold down for holding thin materials,
- a material stop for fast cut set ups,
- a strip bar for cutting strips with the stop,
- left and right measuring tapes,
- vertical rip pointers with tape for fast rip cut set ups,
- a folding stand that is factory attached,
- frame wheels for easy movement of the saw
-
The Saw Trax Full Size 3000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. Features a 74" vertical cut. This series includes an accessory package recommended for customers cutting melamine, custom doors and other material up to 2 1/2 inches thick.- Full Size 120" Wide Frame
- Makita 10" circular saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Steel covered material rollers
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
Out of stock
This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning. The SIMPSON mobile pressure washer 4200 PSI at 4. 0 GPM is a self-contained cleaning machine. Engineered to utilize the power and performance from top of the line SIMPSON pressure washers, it’s matched with the portability of a utility trailer. The 95002 is run by a Honda engine and comes with a 100’ hose, an ergonomic spray gun and 5 Quick-Connect nozzles. This mobile system brings a cleaning solution into the field where water supply is an issue. This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning.Warranty Details: Engine - 3 Year Limited Commercial Warranty | Pump - 5 Year Limited Warranty | Frame - 1 Year Limited Warranty -
Out of stock
The SIMPSON trailer pressure washer 3200 PSI at 2.8 GPM is a self-contained cleaning machine. Engineered to utilize the power and performance from top of the line SIMPSON pressure washers matched with the portability of a utility trailer. The 95000 is run by a Honda engine and comes with a 50’ hose, an ergonomic spray gun and 5 Quick-Connect nozzles. This mobile system brings a cleaning solution into the field where water supply is an issue. This powerful SIMPSON mobile pressure washing system will handle all your commercial jobs. It is perfectly suited for contract cleaners, mobile detailers, municipalities and resorts. The trailer is dot certified as an over-the-road pressure washer system. Job-Site set-up is a snap. Pull up to the work area, connect the spray gun, start the engine and begin cleaning. Warranty Details: Engine - 3 Year Limited Commercial Warranty | Pump - 5 Year Limited Warranty | Frame - 1 Year Limited Warranty -
If you’re looking for the ultimate machine to build face-fames, this is it. The DK3100 contains three spindles that allow you to drill two pocket holes across rails of varying widths in just one machine cycle. Best of all, the DK3100 can also be quickly changed to drill a single pocket hole, like our DK1100 series, by simply removing a drill bit. If you’re serious about face-frame production, the DK3100 is the machine that will deliver real performance to your shop and profits to your bottom line. The DK3100 not only drills two pocket holes in one cycle, it also gives you options for spacing the holes. You can set the drill spindles at 3/4", 1", and 13/4" on center, perfect for today’s most common rail widths. Pocket Holes, Twice as Fast! Multiple spindles give you the option of three different hole spacings to fit today’s most common face-frame widths. If you would prefer to drill only one pocket hole, just remove a drill bit and you get the equivalent of our DK1100 single-spindle machine. Only Kreg offers you the option of one or two pocket holes at a time and your choice of three different on-center hole spacings in the same machine. Easy Setup The lift-off top gives you direct access to the drill bits. A simple turn of an Allen wrench in the drill bit collets is all it takes to change bits. In less than a minute, you can change to any of the three settings or set up the DK3100 for single-spindle drilling. One-Second Cycle Times Two pocket holes in one second? It’s possible with the DK3100. The one-touch foot pedal fires the spindle to make two perfect pocket holes in just one second. Durability The DK3100 uses a hardened-steel drill guide that supports the drill bits all the way into the workpiece, prolonging drill bit life and improving the cut quality of the pocket hole. -
Compact & Powerful Benchtop Press
- Heavy-Duty 3/8" Steel Construction
- Cylinder with 2" Ram and 6-1/4" Stroke
- Rolling Cylinder for Maximum Versatility
- Working Area of 10-1/2" x 20"
- Easy-to-Use Hand/Jog Controls
- Quick Disconnect Hoses
- Hydraulic-Assist Table Height Adjustment
- The compact Edwards 20-Ton Shop Press with single-phase, 230V motor provides smooth, precise and versatile performance. The press can be powered with an Edwards Ironworker with hydraulic accessory pack, or an Edwards Porta Power 5HP, 2750 PSI portable power unit (each sold separately).
Our 20 Ton Shop Press may be small enough to fit on your work bench but it's no lightweight. Smooth and precise, heavy-duty and versatile, the unique open side design allows for material to pass through. Power it up with an Edwards Ironworker with factory installed PowerLink System or an Edwards Portable Power Unit.
-
Out of stock
The Byrd cutterhead is so effective because its 99 carbide inserts are arranged in spiral-shaped rows, have a four-inch radius ground into them, and are mounted so that they approach the wood at a 14-degree angle. The result is a true shear cut that dramatically reduces impact and the resulting fiber disturbance other cutterhead designs deliver. The 209HH is also very quiet during operation. The 209HH is built to last, with a solid cast-iron base, table, and head, and a precision-ground and polished cast-iron, 20- x 25-1/2-inch (W x D) table that rides on four steel columns--plenty of support for large workpieces. And heavy, cast-iron extension wings ensure a flat, smooth cut. To help maintain a cleaner, healthier work environment, there's a five-inch dust port that connects easily to any dust collector.- one dust hood
- two cast-iron extension tables
- one handwheel
- one handle
- one low-speed gear kit
- two hardware bags
- one owner's manual
- warranty card
-
- PROGRAMABLE 10-INCH TABLE SAW: Digital and programmable auto-adjusting table saw with a 52-inch rip capacity makes your days work ripping down material quick and easy
- AUTOMATIC BLADE ANGLE ADJUSTMENT: Motorized blade angle adjustment allows you to adjust the angle of your cut quickly and easily through the digital keypad
- AUTOMATIC RIP FENCE ADJUSTMENT: Motorized rip fence allows you to adjust the dimension of your cut quickly and easily through the digital keypad
- DURABLE AND SMOOTH TABLE SURFACE: Heavy-duty, flat, polished cast iron table surface gives you seamless ripping performance as there is nothing for your material to get snagged on
- DUST-FREE MOTOR ENCLOSURE WITH FAN: Totally enclosed fan-cooled motor gives you long-lasting performance with no hiccups and no need to clean the motor of dust
-
Out of stock
-
Out of stock
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com