- Motor: 7.5 HP
- Tablesaw type: Cabinet
- Blade size: 12 in.
- Maximum cutting height @ 90deg: 4 in.
- Maximum cutting height @ 45deg: 2-3/4 in.
- Maximum ripping capacity - right: 36 in.
- Table type: Precision-Ground Cast Iron
- Overall table size: 48-1/4 in. x 30 in.
- Shipping weight: 698 lbs.
-
-
Out of stock
Style (Type) Cabinet Blade Diameter (In.) 10 Arbor Diameter (In.) 5/8 Arbor Speed (RPM) 4300 Maximum Depth of Cut (In.) 3 Maximum Depth of Cut at 45 Degrees (In.) 2-1/8 Maximum Rip Left of Blade (In.) 13 Maximum Rip Right of Blade (In.) 50 Table in Front of Saw Blade at Maximum Depth of Cut (In.) 10 Maximum Diameter of Dado (In.) 8 Maximum Width of Dado (In.) 13/16 Table Type Cast Iron Table Size (L x W) (In.) 29 x 20 Table Size with Extension (L x W) (In.) 29 x 42 Miter Gauge Type Deluxe Dust Collection Minimum CFM Required (CFM) 350 Dust Port Outside Diameter (In.) 4 Motor Power (HP) 5 -
Out of stock
-
-
Out of stock
The T|Flux series from Laguna starts to get serious. The Titan cyclones are geared towards clients who desire a single central unit for the entire shop. -
- Standard Equipment
- Zinc plated 1¾”steel guide tubes.
- 4 Nylatron roller bearing systems.
- Milwaukee Tool Motor
- Adjustable vertical and horizontal rulers.
- Quick change from vertical to horizontal cutting.
- Thin material pressure guard.
- Injection-molded plastic material rollers.
- Spring loaded counter balance system.
- Integrated dust collection bonnet.
- Extended warranty.
- TUV certified to UL/CSA standards
- Standard Equipment
-
Out of stock
Cutterhead Speed (RPM) 5000 Cutterhead Diameter (In.) 3-3/16 Number of Knives 4 Maximum Full Width Depth of Cut (In.) 3/32 Maximum Planing Width (In.) 20 Maximum Planing Thickness (In.) 8 Minimum Planing Length (In.) 6-3/4 Feed Rate (FPM) 24/31 Table Size (L x W) (In.) 25-3/4 x 20 Dust Collection Minimum CFM Required (CFM) 400 Dust Port Outside Diameter (In.) 5 Motor Power (HP) 3 Motor Phase (PH) 1 Motor Voltage (V.) 230 Prewired Voltage (V.) 230 Motor Amps 14 -
Out of stock
- Induction hardened and ground bedway
- Spindle supported by precision tapered roller bearings
- Safety on/off switch
- Emergency Stop within easy reach of the Operator
- Chuck Guard
- Quick change gearbox provides wide range of inch and metric threads
- Power longitudinal feed allows threading and reverse threading
- Quick locking tailstock
- Standard 1-1/2" x 8 TPI spindle mount allows for many aftermarket accessories
- Reversing switch for added versatility
- Full length splash guard
- Backlash adjustments provided throughout the carriage
- STANDARD ACCESSORIES
- 4" 3-Jaw Chuck
- 7-1/2" 4-Jaw Chuck
- 7" Face Plate
- Steady and Follow Rest
- 4-Way Toolpost
- Set of Tools
- MT-2 & MT-3 Centers
-
Swing Over Bed (In.) 8-3/4 Swing Over Cross Slide (In.) 5 Distance Between Centers (In.) 18 Spindle Bore (In.) 3/4 Spindle Mount 1-1/2 x 8TPI Spindle Taper with Sleeve MT-3 Number of Spindle Speeds 6 Range of Spindle Speeds (RPM) 130-2000 Number of Longitudinal and Cross Feed Rates 60 Range of Longitudinal Feeds (IPR) 0.0006-0.0368 Number of Inch Threads 27 Range of Inch Threads (TPI) 8 - 56 Number of Metric Threads 12 Range of Metric Threads 0.5 - 3.5 Max Tool Size (In.) 1/2 Compound Slide Travel (In.) 1-7/8 Cross Slide Travel (In.) 4-1/4 Carriage Travel (In.) 17.5 Tailstock Spindle Travel (In.) 1-9/16 Taper in Tailstock Spindle MT-2 Follow Rest Capacity (In.) 1-3/4 Steady Rest Capacity (In.) 1-3/4 Width of Bed (In.) 4-1/2 Motor (HP) 3/4 HP, 115V, 1PH Weight (Lbs.) 250 Overall Dimensions (L x W x H) (In.) 41 x 22 x 20
-
Out of stock
The 8" Parallelogram Jointer offers performance and value in a machine loaded with features. Each machine has an extra long 82" bed length for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insures the table remains perfectly parallel, even after years of tough duty. The 1/8" depth limiter control knob gives you quick adjustment ability and safety. A quick twist of the knob will disable this feature. This jointer features a Powermatic controlled chip 3-knife cutterhead for a safe, smooth cut every time. Powerful 2HP motor is totally enclosed in a heavily constructed steel stand providing plenty of power for the most demanding jobs. -
Delta’s 36-L336 left tilt cabinet saw is ideal for woodworking, cabinet making, and boat building. It features up-front dual-crank controls with locking cams, speedometer style scales and a 36 inch Biesemeyer fence. The 3 HP 230V motor cuts hardwoods and engineered products like MDF and melamine. The riving knife enables tool-less adjustment for through- and non-through cuts including grooves for shelves and picture frames as well as dadoes, rabbets, and cheek cuts for furniture. The single-cast trunion provides increased vibration control. Largest throat plate in category eases blade changes. Storage under the table board is convenient and expandable. Bi-level dust extraction improves dust collection.- Bi-Level Dust Extraction for improved dust collection
- Single-Cast Trunnion System provides increased accuracy
- Sure-Lock Dual Front Cranks provides convenient access to dual front cranks
- Precision Bevel Gauge for ease of visibility; Tool-Free Split Guard for improved blade line of sight
-
The 18|CX Bandsaw follows in the traditions of high-performance and reliability established by the widely-used Laguna Tools 14|12 and 14|bx models. The 18|CX is built around a 1.75HP, 110V motor and 145” (368 cm) blade for consistent results, cut-after-cut, regardless of material. -
The Saw Trax Full Size 1000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 1064 features a 64″ vertical cut. This series includes an accessory package recommended for most general wood workers. This 1000 series are ideal for customers that need a vertical panel saw to perform precision cuts in sheet goods that are less than 1 ¾ inches thick.- Full Size 120" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings