-
Out of stock
Cutterhead Speed (RPM) 5000 Cutterhead Diameter (In.) 3-3/16 Number of Knives 4 Maximum Full Width Depth of Cut (In.) 3/32 Maximum Planing Width (In.) 20 Maximum Planing Thickness (In.) 8 Minimum Planing Length (In.) 6-3/4 Feed Rate (FPM) 24/31 Table Size (L x W) (In.) 25-3/4 x 20 Dust Collection Minimum CFM Required (CFM) 400 Dust Port Outside Diameter (In.) 5 Motor Power (HP) 3 Motor Phase (PH) 1 Motor Voltage (V.) 230 Prewired Voltage (V.) 230 Motor Amps 14 -
Out of stock
- Induction hardened and ground bedway
- Spindle supported by precision tapered roller bearings
- Safety on/off switch
- Emergency Stop within easy reach of the Operator
- Chuck Guard
- Quick change gearbox provides wide range of inch and metric threads
- Power longitudinal feed allows threading and reverse threading
- Quick locking tailstock
- Standard 1-1/2" x 8 TPI spindle mount allows for many aftermarket accessories
- Reversing switch for added versatility
- Full length splash guard
- Backlash adjustments provided throughout the carriage
- STANDARD ACCESSORIES
- 4" 3-Jaw Chuck
- 7-1/2" 4-Jaw Chuck
- 7" Face Plate
- Steady and Follow Rest
- 4-Way Toolpost
- Set of Tools
- MT-2 & MT-3 Centers
-
Swing Over Bed (In.) 8-3/4 Swing Over Cross Slide (In.) 5 Distance Between Centers (In.) 18 Spindle Bore (In.) 3/4 Spindle Mount 1-1/2 x 8TPI Spindle Taper with Sleeve MT-3 Number of Spindle Speeds 6 Range of Spindle Speeds (RPM) 130-2000 Number of Longitudinal and Cross Feed Rates 60 Range of Longitudinal Feeds (IPR) 0.0006-0.0368 Number of Inch Threads 27 Range of Inch Threads (TPI) 8 - 56 Number of Metric Threads 12 Range of Metric Threads 0.5 - 3.5 Max Tool Size (In.) 1/2 Compound Slide Travel (In.) 1-7/8 Cross Slide Travel (In.) 4-1/4 Carriage Travel (In.) 17.5 Tailstock Spindle Travel (In.) 1-9/16 Taper in Tailstock Spindle MT-2 Follow Rest Capacity (In.) 1-3/4 Steady Rest Capacity (In.) 1-3/4 Width of Bed (In.) 4-1/2 Motor (HP) 3/4 HP, 115V, 1PH Weight (Lbs.) 250 Overall Dimensions (L x W x H) (In.) 41 x 22 x 20
-
Out of stock
The 8" Parallelogram Jointer offers performance and value in a machine loaded with features. Each machine has an extra long 82" bed length for better work support and is equipped with an innovative single handwheel design that tilts the fence in and out with positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insures the table remains perfectly parallel, even after years of tough duty. The 1/8" depth limiter control knob gives you quick adjustment ability and safety. A quick twist of the knob will disable this feature. This jointer features a Powermatic controlled chip 3-knife cutterhead for a safe, smooth cut every time. Powerful 2HP motor is totally enclosed in a heavily constructed steel stand providing plenty of power for the most demanding jobs. -
Delta’s 36-L336 left tilt cabinet saw is ideal for woodworking, cabinet making, and boat building. It features up-front dual-crank controls with locking cams, speedometer style scales and a 36 inch Biesemeyer fence. The 3 HP 230V motor cuts hardwoods and engineered products like MDF and melamine. The riving knife enables tool-less adjustment for through- and non-through cuts including grooves for shelves and picture frames as well as dadoes, rabbets, and cheek cuts for furniture. The single-cast trunion provides increased vibration control. Largest throat plate in category eases blade changes. Storage under the table board is convenient and expandable. Bi-level dust extraction improves dust collection.- Bi-Level Dust Extraction for improved dust collection
- Single-Cast Trunnion System provides increased accuracy
- Sure-Lock Dual Front Cranks provides convenient access to dual front cranks
- Precision Bevel Gauge for ease of visibility; Tool-Free Split Guard for improved blade line of sight
-
The 18|CX Bandsaw follows in the traditions of high-performance and reliability established by the widely-used Laguna Tools 14|12 and 14|bx models. The 18|CX is built around a 1.75HP, 110V motor and 145” (368 cm) blade for consistent results, cut-after-cut, regardless of material. -
The Saw Trax Full Size 1000 Series panel saw features a 120 inch wide frame and easily performs both vertical and horizontal cuts in your material. The 1064 features a 64″ vertical cut. This series includes an accessory package recommended for most general wood workers. This 1000 series are ideal for customers that need a vertical panel saw to perform precision cuts in sheet goods that are less than 1 ¾ inches thick.- Full Size 120" Wide Frame
- Makita 5007F 7.25" saw
- Spinning saw insert plate
- Dust hood, hose, brush
- Folding Stand and Wheels
- Dual Rip Gauge
- Stop, Bar and Tapes
- Patented Accu-Square System
- Sealed Steel Bearings
-
- Rear roller adjustment dials ensure rear drum is level
- Heavy duty steel frame design with superior finish for long-lasting durability
- Latching top door provides direct access to dual drums for ease in sanding wrap changes
- Toolless drum wrap tensioning clamps make installation and removal of sanding strips easy, requiring less downtime
- Magnetic on/off main motor switch; removable key switch for variable speed feed belt motor
- Two 4 in. dust ports for efficient dust collection requiring a total of only 600 CFMIncludes (2) 4 in. integral dust ports, feed belt, (2) sanding drums, (1) 80 grit and (1) 120 grit sanding strips
- CSA Listed
-
Sale!
Out of stock
The Wilton Cold Front™ Atomized Cooling Fan holds strong against heat and humidity, so your team can safely get down to work. Powerful and portable, the Cold Front uses patented Flow Blurring® technology to instantly evaporate microdroplets and lower air temperature. That means better, more efficient cooling, without a noticeable increase in humidity. With the Cold Front, beating the heat just got easier. -
The 18|CX Bandsaw follows in the traditions of high-performance and reliability to be expected from a Laguna Tools Bandsaw. The 18|CX is built with a 1.75HP, 110V motor and features variable speed control to cut through metals with ease. -
Out of stock
This box brake brake lets you clamp sheet metal with a foot pedal, so both hands are free to position the material.- Bends a maximum capacity of 14 gauge mild steel across the brake’s full 50” length.
- Adjustable stop rod makes it easy to produce repeatable bends.
- Knobs at each end of the brake let you finetune the clamping pressure to fit your application.
- Includes 12 fingers of varying widths that you can easily rearrange to create different sizes of tanks, pans, boxes and more.
- Spring-loaded cylinder assists in lifting the apron, which you’ll find particularly useful when bending at full capacity.
- Blade gap adjustment enables you to take on various gauges of sheet metal.
- Made with a fully-welded steel framework to maintain accuracy and reduce deformation.
-
The Sjobergs Elite line of workbenches represents the highest quality you can get in a professional workbench. The Elite 2500C Workbench with SM04 Cabinet and Accessories combo provides fine furniture makers, carpenters, and serious woodworkers alike with a top-of-the-line space to craft your finest pieces.- Massive 98” long worktop with included Elite Clamping Platform
- Double row of dog holes running from any vise location
- Includes 4 bench dogs
- SM04 cabinet provides extra storage solutions for hand tools, power tools, drill bits, etc.
- Accessories kit includes one 1” Holdfast, one Universal Anvil, and a set of Jaw Cushions
- Constructed of European beech and thoroughly treated with top-quality oil
- Left- or right-handed use
-
Out of stock
Introducing the Powermatic PM2200 Cyclonic Dust Collector with HEPA filtration. The PM2200 pairs the benefits of cyclonic dust collection with the time honored legacy of the Powermatic standard. The all-metal construction provides a stables base for quiet operation and minimal vibration. The Powermatic Cyclone is only cyclonic dust collector on the market with an Auto-Cleaning HEPA filter. The included HEPA filter traps 99.97% of all particles at 0.3 micron. With other market leading features such as a one-handed drum release lever, vacuum pressure gauge, and frameless dust bag vacuum retention, the Powermatic PM2200 Cyclone Dust Collector is an innovative addition to the Powermatic family.
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com