Shop

“Large Dust Bee Gone Mask – Maroon Edging” has been added to your cart. View cart

MTSF3362203-0130-52 Laguna Fusion F3 Tablesaw 52″ 220V 3hp

$2,999.00
MTSF3362203-0130-52, Laguna Tools F3 Fusion 52in Rip Capacity Tablesaw The new Laguna F2 and F3 Table Saws are unlike any saw on the market. Having the same quality demands earned through the original fusion table saw, the new fusion line will not only impress but exceed the expectations you have come to expect from Laguna. With a completely redesigned trunnion and arbor controls that focuses on buttery smooth controls and longevity of the saw, we are sure this is the saw that will give you the perfect rip cut for many many years. 2 New Features Now Standard On F2 & F3 Fusions:

DRO For The Tilt Angle Of Blade

Double Window With Hairline For Hi/Low Fence

Features:

52" Rip Capacity

Industrial 14 Gauge Cabinet

3HP TEFC Motor

220V, Single-Phase, 60Hz Power Requirement

Accessory Tables (Outfeed & Rip)

Industrial Fence Rail

Industrial Fusion Fence

Premium Electrical & Hardware Components

Premium Miter Gauge

Cast Iron Fusion Trunnions

Cabinet Mounted Arbor

Cast Iron Table & Wings

European Hi-Lo Fence

Premium Zero Clearance Throat Plate

Fusion Hi-Lo Dust Collection

Magnetic Contactor Switch

Quick-Release Blade Guard and Spreader

Riving Knife Included

Push Stick Included

Miter Gauge Included

Blade Changing Tool Included

Integrated Tool Storage

10 x 60T Carbide-Tipped Blade Included

Premium Arbor and Motor Bearing

Outfeed Table - Coming standard with the Fusion F3, the outfeed table features dual miter slots and 2 supporting legs

Cabinet Mounted Trunion - Adjusting the table to line up the miter guage has never been easier

Industrial Grade Cabinet - The Fusion 3 features a heavy-duty cabinet for added rigidity and strength

Industrial Fence and Rails - The fence glides effortlessly on the industrial strength steel fence rails

Specifications:

Dust Port Size: 4 in.

Blade Guard Dust Port Size: 1.5 in.

Table Saw Type: Cabinet

220V, Single-Phase, 60Hz Power Requirement

Maximum Blade Diameter: 10 in.

Cutting Material: Wood

Arbor Size: 0.62 in.

Arbor Speed: 4500RPM

Maximum Width Of Dado: 0.75 in.

Blade Tilt Direction: Left

Max Blade Tilt: 45°

Maximum Depth Of Cut At 90°: 3.12 in.

Maximum Depth Of Cut At 45°: 2.12 in.

Max Rip Right Of Blade w/ Included Fence & Rails: 37 in.

Max Rip Left Of Blade w/ Included Fence & Rails: 19.68 in

Included Blade Information: 10" x 60T

Riving Knife/Spreader Thickness: 0.09 in.

Required Blade Body Thickness: > 3.0mm

Required Blade Kerf Thickness: < 2.0mm

Floor To Table Height: 34.9 in.

Table Size With Extension Wings Width: 76.91 in.

Table Size With Extension Wings Depth: 26.9 in.

Distance - Front of Table To Center Of Blade: 13.46 in.

Distance - Front of Table To Blade At Maximum Cut: 8.66 in.

Main Table Size Thickness: 1.49 in

Fence Type: Camlock T-Shape With Aluminum With European Hi-Lo Face

Fence Size Length: 33.46 in.

Fence Size Width: 15.94 in.

Fence Size Height: 3.03 in

Fence Rail Type: Aluminum Extrusion/Angle Steel

Fence Rail Length: 67.87 in.

Fence Rail Width: 3 in.

Fence Rail Height: 2 in.

Weight (Net): 405 lbs.

Overall Width (Side-To-Side): 84.94 in.

Overall Depth (Front-To-Back): 56.1 in.

Overall Height: 42.91 in.

Footprint Width: 48 in

Footprint Length: 42.51 in.

Space Required For Full Range Of Movement Width (Side-To-Side): 84.94 in.

Space Required For Full Range Of Movement Depth (Front-To-Back): 56.1 in.

Table: Precision-Ground Cast Iron

Wings: Precision-Ground Cast Iron

Cabinet: 14 Gauge Steel

Trunnions: Cast Iron

Body Assembly: 14 Gauge Steel

Fence Assembly: Steel Body

Rails: Industrial Steel

Miter Gauge Construction: Cast Iron With Steel Bar, Alu Fence

Guard: Steel And Clear Plastic

Body/Cabinet Paint Type/Finish: Powder Coated

Arbor Bearings: Sealed & Permanently Lubricated
Add to cart Details
Out of stock

Powermatic PM1000 Table Saw Stk No. 1791000KG 100th Anniversary

$2,999.99

Evolution represents a process that is never fully complete. For a woodworker, inspirations evolve as life experiences shape our creativity. Skills evolve as we share tips and techniques with friends and mentors. And our workshops evolve as we refine our skills. At Powermatic, we're proud to introduce the latest example of our own evolution, the PM1000 cabinet table saw. As with every product Powermatic builds, the PM1000 redefines the limits of design, innovation and durability.

Details
Laguna 18 | 36 REVO Lathe 1.5HP 110V

$2,999.99

The First feature that will catch your attention is undoubtedly the ergonomic angled control panel made from anodized aluminum. The blue hue of the DRO along with the beautiful knurled control knob fitted with a rubber grip signals this is no ordinary lathe.The bed is made from steel which allows the cast iron headstock to travel incredibly smoothly. Steel is the preferred material due to its well known longevity & strength.Electronic variable speed is obtained via a VFD that converts 1 phase input to 3 phase output, so even at low settings you will get an incredible amount of torque. The DRO gives you an accurate RPM readout at all times any fine adjustments are made electronically. Changing from high to low settings is made easy by using the quick release handle.The headstock & tailstock lock handles are situated on the back to eliminate any interruptions to your work flow. Ergonomically designed handles use a cam lock resulting in a firm feel with no deflection.

Add to cart Details

JET 719500 Model JWL-1640EVS 16″ x 40″ Wood Lathe 719500

$3,019.99

Swing Over Bed (In.)	16-1/2
Swing Over Tool Rest Base (In.)	12-7/8
Distance Between Centers (In.)	40
Headstock Movement	Slide & Rotate
Spindle Bore (In.)	5/8

Tailstock Bore (In.)	3/8
Spindle Taper	MT2
Quill Taper	MT2
Quill Travel (In.)	4-1/4
Spindle Thread (In./TPI)	1-1/4"/8 TPI
Outboard External Threads (In. x TPI)	3/4-14 LH
Spindle Speeds	High 120-3200/Low 40-1200
Speed Range	40-3200
Number of Indexing Positions	36
Centerline of Spindle to Floor (In.)	44-1/2
Outboard Turning	Yes
Bed Construction	Cast Iron
Motor Power (HP)	1-1/2
Motor Phase (PH)	3
Motor Voltage (V.)	230
Prewired Voltage (V.)	115 Input Only
Wiring Remarks	115v input only
Motor Amps	4.6
Recommended Circuit Size (Amps.)	20

Details

Out of stock

Powermatic 1791000K Model PM1000 Table Saw 30-Inch Fence

$3,019.99
Powermatic warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty lasts for the time period specified in the literature included with your product or on the official Powermatic branded website.

Powermatic products carry a limited warranty which varies in duration based upon the product. (See chart below)

Accessories carry a limited warranty of one year from the date of receipt.

Consumable items are defined as expendable parts or accessories expected to become inoperable within a reasonable amount of use and are covered by a 90 day limited warranty against manufacturer’s defects.Who is CoveredThis warranty covers only the initial purchaser of the product from the date of delivery.What is CoveredThis warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance. Powermatic woodworking machinery is designed to be used with Wood. Use of these machines in the processing of metal, plastics, or other materials outside recommended guidelines may void the warranty. The exceptions are acrylics and other natural items that are made specifically for wood turning.Warranty LimitationsWoodworking products with a Five Year Warranty that are used for commercial or industrial purposes default to a Two Year Warranty. Please contact Technical Service at 1-800-274-6846 for further clarification.
Details
Out of stock

Grizzly G0453Z – 15″ 3 HP Planer with Spiral Cutterhead

$3,065.00
G0453Z 15" 3 HP Planer with Spiral Cutterhead

Upgrade to a spiral cutterhead with power to spare.
The G0453Z 15" 3 HP Planer with Spiral Cutterhead recognized ahead of the rest of the 15" planers tested by WOOD Magazine for its combination of clean cuts and the ability to control snipe. The 4-row spiral cutterhead with 74 German-made indexable carbide inserts cut some of the finest surface finishes money can buy. Each insert can be rotated up to three times to expose a new sharp edge for superior finish. Reducing the cut to the size of a single insert makes for a cleaner cut and reduces noise compared to the traditional straight knife cut. The 3 HP motor spins the cutterhead at 4800 RPM to plane your stock up to 15" wide by 8" thick, cutting as deep as 1/8" per pass. Additionally, the G0453Z features a built-in mobile base, adjustable bed rollers, two-speed automatic board feed, and solid cast-iron extension wings. Like all Grizzly planers, the G0453Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0453Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your planer. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. CSA certified Note on replacement inserts:
- Models manufactured April 2015 and later use H7319 (74) 14mm x 14mm x 2.0mm replacement inserts.
- Models manufactured March 2015 and earlier use T21348 (74) 14.17mm x 14.17mm x 2.0mm replacement inserts.
SPECIFICATIONS:
- Motor: 3 HP, 240V, single-phase, 15A
- Maximum stock width: 15"
- Maximum stock thickness: 8"
- Minimum stock thickness: 3/16"
- Minimum stock length: 8"
- Maximum cutting depth: 1/8"
- Cutterhead diameter: 3"
- Cutterhead type: 4-row spiral, 74 inserts
- Cutterhead speed: 4800 RPM
- Feed rate: 16 & 30 FPM
- Table size with extensions: 15" x 42"
- Dust port size: 4"
- Footprint: 22" x 22-1/2"
- Overall dimensions: 32-1/2" W x 42" D x 45-7/8" H
- Approx. shipping weight: 672 lbs.
FEATURES:
- Board return rollers
- Pedestal-mounted control panel
- Built-in mobile base
- Adjustable bed rollers
- Rubber-coated outfeed roller
- Built-in lifting rods
- Angled dust port hood
- Magnetic switch with thermal overload protection
- Four-column support with table locks
- Precision-ground, cast-iron table and extension wings
- Heavy-duty cast-iron construction
Details
Out of stock

Grizzly G0605X1 Extreme Table Saw, 12-Inch

$3,100.00
This Extreme Table Saw is ideally suited to handling large panels without blinking an eye. A right-hand and rear mounted extension table supports the widest panels before during and after the cut, and the large rail mounted switch control won't get lost under the panel. Other features include ample storage shelves, a user friendly blade guard, a riving knife, a digital readout for blade angle and an efficient dust management system that includes an internal dust port and sloped cabinet floor that directs saw dust into the 4" dust port. Enjoy all of the innovative features this big capacity saw has to offer. CSA certified meeting CSA C22.2 #71.2-08, CSA C22.2 #105-1953, and UL 987 standards. Made in an ISO 9001 Factory. SPECIFICATIONS:
- Motor: 5 HP, 220V, single-phase
- Amps: 18A
- Blade tilt: Left, 45 degrees
- Table height from floor: 35-3/4"
- Table size with extension 69-1/2" x 78-3/4"
- Arbor speed: 3600 RPM
- Arbor size: 1"
- Maximum dado width: 3/4"
- Maximum depth of cut @ 90°: 4"
- Maximum depth cut @ 45°: 2-3/4"
- Maximum rip capacity: 52"
- Distance from front of table to blade at maximum blade height: 11-1/2"
- Distance from front of table to center of blade: 17-1/4"
- Overall dimensions: 91-1/2" W x 79-1/2" D x 42-1/2" H
- Footprint: 22-1/2" L x 24" W
- Approximate shipping weight: 854 lbs.FEATURES:
- Precision-ground cast iron table
- Cast iron trunnions
- 3/8" x 3/4" T-slots & miter gauge
- 4" dust port
- Smooth and quiet Poly-V serpentine belt power transfer
- Steel cabinet
- Hinged motor cover
- Right hand and rear extension tables
- Magnetic switch with thermal overload protection and lock-out padlock
- Digital readout for bevel angle
- Quick change between riving knife and splitter guard
- Includes 12" x 60T blade and push stick
Details
Out of stock

723544OSCK Jet 22-44 OSC Oscillating Drum Sander, 1.75HP 1PH 115V

$3,119.99
- Sealed and permanently lubricated drum ball bearings for longer life
- Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning
- SandSmart™ infinitely variable-feed control produces the ultimate finish at a rate of up to 10 feet per minute
- Conveyor belt TRACKERS™ dramatically reduce the need for manual belt adjustments
- 1" of oscillating stroke
Details
Out of stock

POWERMATIC 1792014AK 2014 LATHE AND STAND

$3,119.99

For nearly one hundred years Powermatic has been dedicated to woodworkers. As a market leader in woodturning Powermatic is proud to offer the powerful PM2014 model lathe.

Details
Out of stock

Grizzly G0651-10″ 3 HP 220V Heavy Duty Cabinet Table Saw w Riving Knife

$3,129.99
Cut panels and wide stock all day long with this 10" Heavy-Duty Cabinet Table Saw. A 52" rip capacity and extended side and rear tables will support a full sheet of plywood, making ripping and cross cutting operations safe and simple. A guard with splitter or interchangeable riving knife helps prevent binding and kickback, and a rail mounted magnetic switch with thermal overload protection provides additional safety features. Bevel cutting is also safe and precise with the left tilting blade and digital angle display. Includes a miter gauge and 10" blade. CSA certified meeting CSA C22.2 #71.2-08 and UL 987 standards! SPECIFICATIONS:
- Motor: 3 HP, 220V, single-phase, 13A
- Rip capacity: 52" right, 18" left of blade
- Max. depth of cut @ 90°: 3-3/16"
- Max. depth of cut @ 45°: 2-3/16"
- Table size with extensions: 75-3/4" W x 27" D
- Distance from front of table to center of blade: 14-7/8"
- Floor-to-table height: 34-7/8"
- Arbor diameter: 5/8"
- Arbor speed: 4000 RPM
- Max. width of dado: 3/4"
- Overall dimensions: 91-1/2" W x 75" D x 40-5/8" H
- Footprint: 22-7/8" L x 21" W
- Approximate shipping weight: 716 lbs.
FEATURES:
- Digital readout for bevel angle
- Precision-ground cast-iron table
- Cast-iron trunnions
- 3/8" x 3/4" T-slots & miter gauge
- 4" Dust port
- Poly-V serpentine drive belt
- Steel cabinet with hinged motor cover
- Right hand and rear extension tables
- Magnetic switch with thermal overload protection and lock-out padlock
- Quickly changes between riving knife and blade guard/spreader assembly
- Certified to UL & CSA standards
- Includes 10" x 40T blade & push stick
Details
Out of stock

JET HVBS-710G, 7″ x 10-1/2″ Horizontal/Vertical Bandsaw 413452

$3,149.00

JET Mitering Horizontal bandsaws unique design features a swiveling head while the base remains stationary. This allows the stock to remain same position while making accurate crosscuts and miters. Backed by the industry leading two year warranty, JET Mitering Bandsaws are built to last and deliver precision results.

Details
SJO-66703K Sjobergs Elite 1500 Workbench plus Cabinet Combo SM03

$3,150.00
Constructed of European beech, the top thickness is 3-11/32" in the center (4-5/16" skirt), and it comes treated with a premium quality enriching oil. The specially developed vises provide an enormous clamping power across 23-1/2". You will be amazed by the clamping speed, accuracy and smoothness.

Table surface is 35-1/2" off the floor

Top is 54" long and 23-5/8" wide

Vises open 5-3/4"

Storage cabinet also available

Assembled weight is 229 lbs.; with optional cabinet 286 lbs.
Add to cart Details