-
-
-
Out of stock
12” Variable Speed Benchtop Drill Press #30-212VS features a more powerful motor and a Vari-speed pulley system that adjusts to chuck speeds with a simple turning of a lever! Includes digital RPM readout, LED work light, laserX-Y drilling guide, clamp-friendly thin edge woodworking table and a 5/8” chuck. -
-
-
G0709 14" x 40" Gunsmithing Gearhead Lathe
An accurate and powerful lathe.
What makes the G0709 14" x 40" Gunsmithing Gearhead Lathe a "gunsmithing" lathe is that it comes with features typically not found on standard lathes, such as the high-precision NSK bearings, extra-large 1-9/16" spindle bore and a "spider" mount system. The spider mount system has four brass-tipped screws that stabilize long shafting and rifle barrels through the outboard end of the spindle. Supplied with a 2 HP motor, the 8-speed gearhead of the G0709 produces spindle speeds from 70-2000 RPM. The tailstock lock system features a drive hub, which allows you to use a 1/2” torque wrench to clamp the tailstock in place at a pre-determined torque setting. This ensures consistent draw-down alignment every time, even with multiple lathe operators using the machine. The G0709 features a foot brake that also acts as a safety device and can bring the machine to an instant stop. The G0709 also comes with a D1-5 spindle, a 200 series quick change tool post, flood coolant system, LED work light, and a pull-out chip tray. Like all Grizzly gunsmithing lathes, the G0709 comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0709 manual was written by our U.S. based Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your lathe. The Grizzly Technical Support team is U.S. based. Parts and accessories for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.SPECIFICATIONS
- Motor: 2 HP, 220V, single-phase, 10A
- Swing over bed: 14"
- Distance between centers: 40"
- Swing over saddle: 13-13/16"
- Swing over cross slide: 8-13/16"
- Spindle bore: 1.57" (40mm)
- Spindle nose taper: MT#5
- Spindle nose: D1-5 Camlock
- Spindle speeds: 8, 70-2000 RPM
- Carriage travel: 36"
- Cross slide travel: 6-11/16"
- Tailstock barrel taper: MT#3
- Tailstock barrel travel: 3-15/16"
- Overall dimensions: 71-1/2" L x 26-3/16" W x 52" H
- Approximate shipping weight: 1550 lbs.
FEATURES
- Easy-to-use lever controls
- Hardened and ground cast-iron bed
- Cuts 4-112 Standard TPI and 0.1-7 Metric
- Cuts LH threads
- On/off reverse switch on carriage
- Socket for tailstock lock
- Cast aluminum gear cover
STANDARD EQUIPMENT
- 6" 3-Jaw chuck with reversible jaws
- 8" 4-Jaw chuck with independent jaws
- 11" face plate
- Steady rest/follow rest
- Full length splash guard
- Quick change tool post with 2 tool holders
- (2) MT#3 dead centers (1 carbide tipped)
- (1) MT#3 live center
- (1) MT#5 - MT#3 sleeve
- Pull out chip pan
- 1/2" drill chuck w/ MT#3 arbor
- Toolbox
-
Out of stock
-
All electrical and rotating parts are designed for safety and ease of use
-
Cast iron frame
-
Convenient foot-control assembly with emergency-button
-
Easy to setup and operate
-
Forming roll has attached position scale for equal pressure adjustment
-
Forward and reverse action
-
Heavy duty cast iron frame and enclosed base insure precise sheet metal rolling.
-
Perfect tool for sheet metal forming in HVAC and FAB-shops
-
Roll drive is controlled by foot pedal for immediate forward and reverse action
-
-
Out of stock
1 HP portable dust collector #60-105 is a great size and adaptable for many uses that a small shop encounters. Single 4 In. dust port draws 660 CFM, more than enough vacuum power for big chip makers, like jointer and planers. Built-in casters and handle make moving it about easy. Features an adjustable pipe extension with chip collecting funnel that can be positioned high for use with lathes, drill presses, workbenches etc. Includes 2 micron cloth filter bag, 108 In. long x 4 In. dust hose, adjustable pipe & funnel attachment system, safety on/off switch, and wall mounting brackets. 1 HP develops 660 CFM 4 In. dust port inlet for attaching to a single machine Includes casters for easy mobility around the shop Includes adjustable pipe & funnel system for dust collection use with lathes, drill presses, workbenches, etc. can be positioned up to 55 In. high. -
AXD001004 Improved, high airflow, cyclone design stops over 99% of fine dusts and bulk debris from clogging your vacuum's filter - eliminating suction loss while saving you time and money on expensive replacements! DIY kit is perfect for building your own dust collection system!- The latest and greatest edition of the original dust cyclone!
- Up to 2x the airflow of smaller cyclones and lid-style separators.
- Upgrades any make/model shop vacuum with 2.5" hose fittings.
- Neutral-vane technology improves separation efficiency by 20%.
- Mounts to any size and type of reinforced, airtight container.
- Anti-static components significantly reduce the likelihood of static shocks.
- Backwards compatible 3" ID flange makes upgrades quick and easy.
Proposition 65 WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm. -
-
Item Number BR-18E-36 Motor Hp 1/8 hp Max. Thickness (Mild Steel) 16 gauge Roll Holder Included Throat Depth 36" Stand Included Adjustable Depth Stop Included Power 110V Shipping Weight 240lbs Shipping Dimensions (Inches) 62x23x23 -
Out of stock
Item Number BR-18E-24 Motor Hp 1/8 hp Max. Thickness (Mild Steel) 16 gauge Roll Holder Included Throat Depth 24" Stand Included Adjustable Depth Stop Included Power 110V Shipping Weight 200lbs Shipping Dimensions (Inches) 50x23x23
