| Item Number | BR-18E-24 |
|---|---|
| Motor Hp | 1/8 hp |
| Max. Thickness (Mild Steel) | 16 gauge |
| Roll Holder | Included |
| Throat Depth | 24" |
| Stand | Included |
| Adjustable Depth Stop | Included |
| Power | 110V |
| Shipping Weight | 200lbs |
| Shipping Dimensions (Inches) | 50x23x23 |
-
Out of stock
-
Out of stock
NEW Available 2/1/19 Maximize your table saws potential with the new Powermatic Sliding Table Saw attachment. This large sliding table bolts to the table saw and enables smooth and precise cuts on large sheets and stock. With it's precision bearing track system, the Powermatic Sliding table saw attachment allows for ultimate support and controlled sliding operation while performing straight or angled cuts. The new Powermatic Sliding Table Saw is engineered to ensure precision while maximizing efficiency and performance. -
The GW1949 Wiseway from US Stove eliminates the need for electricity by utilizing a natural gravity feed system that eliminates all of the typical electrical and mechanical parts found in traditional pellet heaters. This patented revolutionary design is the only EPA certified and UL listed non-electric pellet stove on the market today. The Wiseway is simple to start and operate. Simply heat the burn chamber and flue with a propane torch and start the pellet flow. This stove uses a natural draft that will take over and ramp the stove up to temperature. Adjustments are simple by opening and closing fresh air intakes on the front of the stove. The window allows you to see the flame traveling up the body of the stove. Since it uses no electricity, heat is radiated off the 3.5 In. tubing and the steel baffles on the back. Best of all, this stove offers extremely small clearances on the rear and sides making it easy to install. Impressively, since it does not use any electricity this stove is the perfect source of heat for areas that are prone to blackouts or off the grid installations. -
-
Specifications
- Max. workpiece width: 48"
- Bending capacity at full width: 18 ga. mild steel
- Bending capacity at half width: 16 ga. mild steel
- Brakes: 0-135°
- Box fingers: 2" (x5), 3" (x6), 4" (x5)
- Footprint: 52" x 12-1/2"
- Max. height of pan/box brake sides: 2-1/2"
- Brake steel with hardened edge
- Approximate shipping weight: 383 lbs
-
Out of stock
The SIMPSON PowerShot 3800 PSI at 3.5 GPM is ideal for prosumers and professionals alike. This is a powerful option for deep outdoor cleaning, jobsite use, equipment upkeep and facility or fleet maintenance. This product is engineered to meet the demands of a cleaning professional. The PS3835 features a commercial HONDA GX270 engine, reliable AAA industrial triplex pump, 50-ft kink & abrasion resistant hose, ergonomic spray gun and 5 Quick-connect nozzles. Designed to meet the rigorous demands of the cleaning professional, the SIMPSON PowerShot Series frame is crafted of solid steel making it powerful, yet extremely compact, easy to transport, set-up and load. Perfect for contractors who specialize in deck cleaning, wood restoration, paint preparation, graffiti removal and all other professional cleaning services. The SIMPSON PowerShot Series designed for optimum performance in the harshest environments. 3 year limited HONDA commercial engine, 5 year limited pump, 10 year limited frame and 90 day accessory -
Out of stock
Item Number RDB-050 Minimum CLR 3" Minimum OD .75" Mild Steel Solid Rod 1" Mild Steel Pipe Schedule 40 Call for Details Mild Steel Round Tube Wall 2.5" (.120) Stainless Steel Pipe Schedule 40 Call for Details Stainless Steel Round Tube Wall 2" (.120) Chromolly Round Tube Wall 2" (.120) Aluminum Pipe Sch. 40 Call for Details Aluminum Round Tube Wall 2.5" (.120) Max. Clr 7" Power Manual Shipping Weight 290lbs Special Notes tooling not included, contact Baileigh at 920-684-4990 for correct sizing. Things to Know Before Purchase All capacities based on A53 grade A (mild steel) 48,000 psi tensile materials; heavy wall and high tensile materials may reduce machine capacity. Consult Baileigh Industrial to review material specifications. Shipping Dimensions (Inches) 36x36x18 -
Out of stock
The M1118 48" Pan and Box Brake is suitable for many metal forming operations and includes total of 16 fingers in 2", 3", and 4" sizes that can be easily removed or repositioned. The precision-ground fingers can be used individually or all at once. The bed and beam are precision aligned and two independent cam action levers raise the beam well above the bed. A large counter-balanced handle makes brake operations from 0° to 135° easy for all day use. The M1118 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects. The M1118 manual was written by our U.S. based Tech Doc Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your pan and box brake.p> The Woodstock Customer Service and Tech Support Teams are U.S. based. Parts for the shaper may be available online and shipped from the Woodstock parts warehouse in Springfield, MO..SPECIFICATIONS:
- Maximum capacity: 48"
- Mild Steel Gauge: 16-gauge at half width, 18-gauge at full width
- Brake range: 0–135°
- Minimum reverse bend: 7/16"
- Maximum height of pan/box sides: 2-1/2"
- Number of each box finger size: (5) 2", (6) 3", (5) 4"
- Footprint: 12-1/2" x 52"
- Overall dimensions: 78-1/2" W x 18" D x 31" H
- Approx. shipping weight: 353 lbs.
FEATURES:
- Bending leaf counterweighted for leverage
- Precision-ground steel fingers with hardened edges
- Sixteen adjustable/removable fingers
-
Sale!
We took our rock-solid 2 HP, 10" table saw platform and added both a blade guard and cabinet dust collection system for the ultimate in clean operation. The easy-glide, two-position fence system quickly adjusts to rip narrow workpieces. The clear blade guard features built-in dust collection and a quick-release system for fast and easy guard and spreader/riving knife changeovers. Specifications- Motor: 2 HP, 115V/230V (prewired 115V), single-phase, 16A/8A
- Rip capacity: 31-1/2" right ,11-3/8" left of blade
- Max. depth of cut @ 90°: 3-1/8"
- Max. depth of cut @ 45°: 2-1/8"
- Table size with extension wings: 40-1/8" W x 27" D
- Distance from front of table to center of blade: 16-1/4"
- Floor-to-table height: 34-1/4"
- Arbor diameter: 5/8"
- Arbor speed: 4000 RPM
- Max. width of dado: 13/16"
- Dust port size: 4"
- Overall dimensions: 63" W x 40" D x 48" H
- Footprint: 20-1/2" L x 19-1/2" W
- Approximate shipping weight: 449 lbs.
- Fully-enclosed blade guard with dust port
- Quick-release spreader/riving knife system
- Hinged motor cover
- Chromed cast-iron handwheels
- Heavy-duty miter gauge
- Poly-V drive belt for reduced noise/vibration
- Precision-ground cast-iron table
- Cabinet-mounted cast-iron trunnions
- Durable powder-coated finish
- Deluxe 2-position aluminum rip fence
- Easy-glide fence system with micro adjustment
- Standard & dado table inserts
- Includes 10" x 40T carbide-tipped blade
-
Out of stock
Length of worktop 52 5?8" Width of worktop 22 13?16" Thickness of worktop 1 1?2" 171 lb 15 oz -
With the launch of the Revo 15|24 Laguna is filling the gap between the Revo 12|16 & the legendary Revo 18|36, providing space constrained users with more power and capacity. Light optional. Tallstock extension optional. Mobil base optional. -
Sale!
The latest addition to our vertical metal-cutting bandsaws offers affordable versatility not found on any saw in its class. Start with inverter motor speed control. 220V, single-phase goes in and 220V, 3-phase comes out, giving you variable speed control over the blade speed with just the turn of a dial. Blade changes are fast and easy with the quick-release blade feature. This combination allows you to cut any variety of materials (even wood!) and adjust for blade width, tooth pitch and speed on one machine! Check out all the other features listed below. Features:- Variable speed control
- Left and right table tilting control
- Upper and lower blade guides
- Rack and pinion adjustment on upper blade guide support
- Precision ground cast iron table
- Fully balanced cast iron wheels with rubber tires
- Quick release blade tension
- Steel guide blocks
- 2-1/2" universal dust port
- Includes rip fence and miter gauge
- Rip fence comes with: Right and left reading indicators, T-slots for quick change attachments, Dead lift quick release, Ball bearing slide, Solid lever lock
- Motor: 1-1/4 HP, 220V, 3-phase, 1725 RPM, 4.8 Amps with single-phase inverter
- Required power source: 220V, single-phase, 60Hz
- Maximum cutting height: 10"
- Throat capacity: 13-1/2"
- Blade length: 108"
- Blade size range: 1/8" - 1"
- Included blade size: 108-1/8" x 3/8" x 6 TPI (similar to Grizzly model H9967 wood cutting blade)
- Blade speed: variable, 150 - 3000 FPM
- Table tilt: 45° right, 5° left
- Floor to table height: 38-1/2"
- Table size: 16" x 20" Overall dimensions: 72-1/2"H x 30"W x 30"D
- Approx. shipping weight: 277 lbs.
-
Item Number BR-18E-36 Motor Hp 1/8 hp Max. Thickness (Mild Steel) 16 gauge Roll Holder Included Throat Depth 36" Stand Included Adjustable Depth Stop Included Power 110V Shipping Weight 240lbs Shipping Dimensions (Inches) 62x23x23 -
Out of stock
Built with a rigid steel frame and a 24” x 24” cast iron table, this floor-style oscillating spindle sander is a heavy-duty professional shop machine. It comes with 10 spindle sizes, from ¼” to 4”.- Runs on 110-volt power. Plug it into any household outlet.
- 1 hp motor spins the spindle at 1,725 rpm.
- Oscillating spindle moves up and down 1½” to create an extremely smooth finished surface.
- Precision-ground 2 foot x 2 foot cast iron table remains square and level through many years of use.
- Cast iron table won’t warp like aluminum tables found on competing models.
- Table tilts up to 45° with a scale for repeatability.
- Comes with 10 different spindle sizes (see below) to provide the most sanding choices in one package.
- Heavy steel frame stabilizes the machine for greater accuracy.
- Weighs 320 lbs., so you know you’re getting one solidly built wood sander.
- 4” dust hood helps trap particles, keeping your shop air clean and safe.
- Accepts standard sized belts, so you can find replacements easily.
- This oscillating drum sander is covered by a 1-year parts warranty.
- Replacement parts are in stock at our Wisconsin headquarters, so we can ship them out to you quickly.
- We offer lifetime technical support by phone. Call us and talk to a customer service rep with hands-on woodworking experience.
- ¼” x 6”
- ⅜” x 6”
- ½” x 6”
- ⅝” x 6”
- ¾” x 9”
- 1” x 9”
- 1½” x 9”
- 2” x 5½”
- 3” x 9”
- 4” x 9”
* specifications subject to change without notice.Item Number OS-2424 Shipping Weight 365lbs Spindle 1/4" x 6", 3/8" x 6, 1/2" x 6", 5/8" x 6", 3/4" x 9", 1" x 9", 1-1/2" x 9", 2" x 5-1/2", 3" x 9", & 4" x 9" Included RPM 1725 Spindle Travel 1-1/2" Table Tilt (degrees) 45 Oscillations Per Minute 75 Power 110V Horse Power 1 Weight (lbs) 320 Shipping Dimensions (Inches) 48x45x50 -
SUPMX-72550 25-50 Drum Sander with Closed Stand, w/ built in casters, 110V, 1-3/4HP The 25-50 Drum Sander is the newest member of SuperMax Tools drum sander family which was designed with new features to improve productivity. Patented Quick Adjustment Lever: reduces set-up time. Turbo Vented dust port: increases airflow to your dust collector by 15%. Rear placement of the Gear Motor: improve conveyor belt tracking. These new features complement the same great features SuperMax Tools have provided for years. Patented Fast Lever: allows quick adjustments for wide and narrow stock INTELLISAND Technology: prevents gouging, damaging, or burning material. The SuperMax 25-50 Drum Sander is the largest open-ended drum sander on the market. Sand 25″ in a single pass, and up to 50” in a double pass. Features:- Simple alignment feature Just one nut will adjust the conveyor to parallel the sanding head, making aligning the conveyor to the sanding head fast and easy.
- Indexed alignment setting Has an indexed alignment setting for narrow and wide stock. When sanding stock wider than 25”, the index lever will properly adjust the conveyor for flawless wide sanding.
- Easy height adjustments A thrust bearing below the handle and a nut positioned above prevents the drum from moving out of the set position while sanding. No backlash or slop in the height adjustment mechanism allowing easier and smoother height adjustments.
- Drum will never go “out of alignment” The drum carriage is bolted to the base, preventing any movement or alignment issues.
- INTELLISAND™ Technology: Automatically adjusts conveyor speed based on load
- Prevents gouging, damaging or burning stock
- Provides consistent finish even with varying grain pattern and density
- Greatly increases abrasive planing and dimensioning speed
- Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor, guaranteeing flatness to less than .010″ across the width of the sander
- Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner
- Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap
- Easiest access to abrasive fastening system of any drum sander! Extra wide space to access fasteners to eliminate need for special tools.
- Self-cooling drum prevents overheating and extends abrasive life
- Tension rollers are adjustable in height and hold down pressure, eliminating snipe
- Excellent dust extraction as dust cover is formed to shape of drum
- Metal, not plastic, is formed to maximize air flow and dust extraction
- Heavy-duty cast iron construction for strength, rigidity and reduced vibration
- Mobile Base allows for stand and machine to be to moved easily
- Optional Accessory Available: DRO (digital read out): maintain material thicknesses to increase accuracy and quality.
Sanding Capacity: Maximum Width (in): 50 (two passes) Minimum Length (in): 2-1/4 Maximum Thickness (in): 4 Minimum Thickness (in): 1/32 Dimensions (in): 27D x 46W x 53H (on stand) Drum: 5 x 25 extruded aluminum Drum Speed: 1740 RPM Dust Hood: 1- 4″ vacuum port, min. 600 CFM recommended Conveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPM Drive Motor (TEFC): 1-3/4 HP Power Requirements 110 V 20 amp Shipping Weight (lbs): 369 (3 boxes incl. stand) -
Sale!
We took our new G1023RL table saw with riving knife and made it even better by including a built-in router table that doubles as a table extension wing. The router table includes support legs and universal T-track router clamping system, and the Shop Fox® Classic Fence included for the table saw doubles as a router table fence. You'll find that using this system is actually much nicer and more convenient than using a typical router table or hand held router for those cuts where the fence is not required to be offset, especially if the table saw is set up with large outfeed tables. Another great advantage is being able to make laser straight dadoes without having to change table saw blades. Please note: this router table does not work with small trim routers. CSA certified meeting CSA C22.2 #71.2-08 and UL 987 standards! SPECIFICATIONS:- Motor: 3 HP, 240V, single-phase, 14A
- Rip capacity: 8" left, 32" right of blade
- Maximum depth of cut @ 90°: 3"
- Maximum depth of cut @ 45°: 2-1/8"
- Assembled table size: 48" W x 27" D
- Distance from front of table to center of blade: 17"
- Floor-to-table height: 34"
- Arbor diameter: 5/8"
- Arbor speed: 4200 RPM
- Max. width of dado: 13/16"
- Overall dimensions: 66" W x 47" D x 39-3/4" H
- Footprint: 20-1/2" x 20-1/2"
- Approximate shipping weight: 550 lbs.
- Built-in cast-iron router table extension with adjustable legs
- Precision-ground cast-iron table
- 4" Dust port
- Extra large handwheels ease arbor movement
- Quickly changes between riving knife and blade guard
- Magnetic safety switch is standard
- One-piece steel cabinet type stand
- All sealed ball-bearing construction
- Poly-V serpentine belt transfers power more efficiently and with less noise than standard V-belts
- Underside of blade encapsulated for superior dust collection
- Certified to UL & CSA standards
- Includes 10" x 40T blade!
-
-
Out of stock
18” Bandsaw #10-342 is an entry level machine to this larger capacity category. Ample 2 HP motor provides plenty of power behind the single 3,200 ft/min blade speed of the machine. Cast iron table includes a single‘T’ slot for use with miter gauges (available separately) or other cutting jigs. Includes 120V electrical outlet on rear of machine. Machine requires 4-wire electrical plug. -
Sale!
Need to sand wide panels or that live edge slab on your project list?
The open frame design of the G0920 22" Open-Ended Drum Sander allows you to sand workpieces up to 44" wide. Simply sand one half, turn the piece around and sand the other half. The 2 HP motor supplies plenty of power to rotate the 5" computer-balanced aluminum sanding drum. The variable-speed conveyor can be adjusted between 0–20 feet per minute. The digital depth gauge offers a precise reading of the distance between the table and the sanding drum. The spring-tensioned sandpaper fasteners make changing belts quick and simple. You’ll get precision results and long-lasting durability thanks to the drum height handwheel, industrial-duty rubber conveyor belt, heavy-duty enclosed stand, and easy conveyor belt tracking. Like all Grizzly drum sanders, the G0920 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0920 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your sander. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the sander are available online and shipped from the Grizzly parts warehouse in Springfield, MO.SPECIFICATIONS:
- Drum motor: 2 HP, 230V, single-phase, 7.5A
- Feed motor: 50W, 1A
- Maximum stock thickness: 5"
- Minimum stock thickness: 1/4"
- Maximum sanding width: 44"
- Minimum sanding width: 2"
- Minimum board length: 9"
- Sandpaper type: 3" width roll, plain backed
- Sandpaper speed: 2300 FPM
- Conveyor feed rate: Variable, 0–20 FPM
- Drum size: 5"
- Dust port size: 4"
- Footprint 23-1/2" x 32-1/2"
- Overall dimensions 42-1/2" W x 43-1/2" D x 61" H
- Approximate shipping weight: 341 lbs.
FEATURES:
- Variable-speed conveyor
- Digital thickness readout
- Spring-loaded sanding belt tension/sandpaper
- 4" Dust port with hose hook
- Industrial-duty rubber conveyor belt
- Push button circuit breaker for easy reset
-
Grizzly Industrial, Inc. has grown into one of the largest machinery companies in the United States. Their products can be found in all sizes of shops from the large industrial production users to the smaller cabinet and machine shops. They have the widest product selection under one brand in the world. -
Cut both woods and metals with this 2 HP 17" Combination Bandsaw.
We've taken all the best features from our vertical wood cutting bandsaws and added variable-speed blade control with two speed ranges to allow this Combination 17" Bandsaw to double up as a wood-cutting and metal-cutting bandsaw with the power and cutting capacity to tackle just about anything! You will find many other features that have made Grizzly chainsaws so popular with our customers such as an included cast iron fence with extruded-aluminum rail and resaw fence attachment, rack-and-pinon upper guide adjustment, cast iron trunnion, cast iron wheels and rack-and-pinion table tilt control. This bandsaw has everything you could wish for, including variable speed! The Grizzly G0640X Metal/Wood Bandsaw is covered by a one-year warranty that covers replacement parts and guards against factory defects. The G0640X is supported by a US-based product support team and replacement parts are available on-line and ship from our massive Parts Department in Springfield Missouri. This bandsaw is produced in a ISO 9001 factory to assure quality. Features:- Variable speed control
- Requires single-phase power
- Left and right table tilting control
- Upper and lower ball-bearing blade guides
- Rack-and-pinion adjustment on upper blade guide support
- Precision-ground cast iron table
- Fully balanced cast iron wheels with rubber tires
- Quick release blade tension
- Two 4" dust ports
- Includes rip fence and miter gauge
- Rip fence comes with: magnified cursor, dead lift quick release, solid lever lock and extruded aluminum resaw fence that also transforms for cutting thin stock
- Motor: 2 HP, 220V, 3-phase, 1725 RPM, 8 Amps (Actually runs on single-phase, 220V)
- Maximum cutting height: 12"
- Throat capacity: 16-1/4"
- Blade length: 131-1/2"
- Blade size range: 1/8"-1"
- Included blade size: 131-1/2" x 1/2" x 6 TPI (similar to Grizzly model H4807 wood cutting blade)
- Blade speed: Variable, 100-3600 FPM
- Table tilt: 45° right, 5° left
- Floor to table height: 37-1/2"
- Table size: 23-5/8" x 17-1/4"
- Overall size: 32" W x 73" H x 32" D
- Approximate shipping weight: 416 lbs.
-
Out of stock
The Rikon 10-353 14" Professional Bandsaw is equipped with a large work table measuring 21-1/2" x 15-3/4" and a 13-5/8" throat which will allow the user to cut thicker material on a compact saw. The 3 HP motor with a blade speed of 4300 ft/min provides ample power for re-sawing and cutting other materials, such as, plastic composite and foam materials. -
-
From Oneida, the Supercell High-Pressure Dust Collector, 14 Gallon, may be the solution to your dust collection problems. Named for one of the world's most powerful cyclonic storm systems, the Supercell is the first and only dust collector on the market with enough static pressure and air movement to effectively capture and contain dust from every tool in the shop with a dust port size of 1" to 5". From the smallest handheld sanders, table saws and miter saws, to jointers, planers and even CNC Routers this unit is a workhorse that can handle some of the largest jobs.The Supercell is especially useful for problematic 2" diameter ports where standard collectors don't provide adequate suction and wet/dry vacuums can't move enough air to effectively collect dust and debris. With an adaptable design, it mounts conveniently to the wall and can be installed virtually anywhere in the shop. With easy tool connections, connect as far away as 100' and up to 4" hose and ductwork. Packed with innovative features, including HEPA filtration with internal pulse filter cleaner and dust bin level sensor, the Supercell is the perfect dust collection system for the big or small shop. Patent PendingFeatures
- 10x higher suction power than standard dust collectors
- Accommodates simultaneous use of up to 3 tools with 1" to 2.5" dust ports
- 3 - 1300W modular motors (combined 5HP equivalent) operates at 230V with magnetic starter and overload protector
- Wireless remote control operates at radio frequency
- Ultra-high efficiency cyclone separator removes 99% of dust from incoming airstream
- Premium HEPA filtration rated at 99.97% efficient at 0.3 microns with non-stick, PTFE membrane
- Internal pulse filter cleaner removes clogs in seconds
- Lightweight 14-gallon mobile dust bin with liner bag holder and fill level viewing window
- Dust Sentry automatically alerts When the dust drum/dust bin is full
- Mounts to walls with standard 16" stud spacing. Inlet rotates to match your shop layout.
- Includes 25' of reinforced, 4" diameter vacuum-pressured rated flex hose
Specifications
- Maximum Suction Rating: 97.8" WC
- Motor Type: 3x 1300W Modular Motors
- Horsepower: 5HP Total
- Motor Speed: 48,800RPM
- Phase: 1PH/Single Phase
- Amperage: 17A
- Voltage: 208-230V
- Cycle: 60HZ
- Listed FLA: 18A
- On/Off Switch: Magnetic Starter with on-off Switch preset for Included Remote
- Power Cord Length: 10'
- Power Connector: NEMA 6-20
- Recommended Circuit Size: 20 A
- Recommended Circuit Type: HACR
- Sound Emission: 80 dBA at 10'
- Filter Media Type: HEPA Certified
- Filter Efficiency: 99.97% at 0.3 microns
- Filter Surface Area: 40 sq. ft.
- CFM Rating: 465 CFM
- Merv Rating: 16+
- Waste Capacity: 14 Gallons
- Primary Build Materials: Cold rolled steel, SD Polyethylene, seam welded
- Static Resistance Rating: Conductive (metal)
- Inlet Size: 4" O.D.
- Discharge Size: 5"O.D.
- Measurements: 20"w x 21" d x 61" h
- Weight: 76lbs
Includes
1 year warranty- Fan Motor Assembly
- Magnetic Starter
- Remote Control
- Cartridge Filter
- Pulse Filter Cleaner
- Cyclone Separator
- Wall Bracket
- Blast Gate
- Turn Key Clamp - 2 each
- Mobile Dust Bin
- Dust Sentry Bin level indicator
- Bag Retainer System
- 25' x 4" Vacuum Pressure rated Hose
- 5 Liner Bags
- Viewing Window
- Hardware
-
G0453Z 15" 3 HP Planer with Spiral Cutterhead
Upgrade to a spiral cutterhead with power to spare.
The G0453Z 15" 3 HP Planer with Spiral Cutterhead recognized ahead of the rest of the 15" planers tested by WOOD Magazine for its combination of clean cuts and the ability to control snipe. The 4-row spiral cutterhead with 74 German-made indexable carbide inserts cut some of the finest surface finishes money can buy. Each insert can be rotated up to three times to expose a new sharp edge for superior finish. Reducing the cut to the size of a single insert makes for a cleaner cut and reduces noise compared to the traditional straight knife cut. The 3 HP motor spins the cutterhead at 4800 RPM to plane your stock up to 15" wide by 8" thick, cutting as deep as 1/8" per pass. Additionally, the G0453Z features a built-in mobile base, adjustable bed rollers, two-speed automatic board feed, and solid cast-iron extension wings. Like all Grizzly planers, the G0453Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0453Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your planer. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. CSA certified Note on replacement inserts:- Models manufactured April 2015 and later use H7319 (74) 14mm x 14mm x 2.0mm replacement inserts.
- Models manufactured March 2015 and earlier use T21348 (74) 14.17mm x 14.17mm x 2.0mm replacement inserts.
- Motor: 3 HP, 240V, single-phase, 15A
- Maximum stock width: 15"
- Maximum stock thickness: 8"
- Minimum stock thickness: 3/16"
- Minimum stock length: 8"
- Maximum cutting depth: 1/8"
- Cutterhead diameter: 3"
- Cutterhead type: 4-row spiral, 74 inserts
- Cutterhead speed: 4800 RPM
- Feed rate: 16 & 30 FPM
- Table size with extensions: 15" x 42"
- Dust port size: 4"
- Footprint: 22" x 22-1/2"
- Overall dimensions: 32-1/2" W x 42" D x 45-7/8" H
- Approx. shipping weight: 672 lbs.
- Board return rollers
- Pedestal-mounted control panel
- Built-in mobile base
- Adjustable bed rollers
- Rubber-coated outfeed roller
- Built-in lifting rods
- Angled dust port hood
- Magnetic switch with thermal overload protection
- Four-column support with table locks
- Precision-ground, cast-iron table and extension wings
- Heavy-duty cast-iron construction
-
Cut panels and wide stock all day long with this 10" Heavy-Duty Cabinet Table Saw. A 52" rip capacity and extended side and rear tables will support a full sheet of plywood, making ripping and cross cutting operations safe and simple. A guard with splitter or interchangeable riving knife helps prevent binding and kickback, and a rail mounted magnetic switch with thermal overload protection provides additional safety features. Bevel cutting is also safe and precise with the left tilting blade and digital angle display. Includes a miter gauge and 10" blade. CSA certified meeting CSA C22.2 #71.2-08 and UL 987 standards! SPECIFICATIONS:- Motor: 3 HP, 220V, single-phase, 13A
- Rip capacity: 52" right, 18" left of blade
- Max. depth of cut @ 90°: 3-3/16"
- Max. depth of cut @ 45°: 2-3/16"
- Table size with extensions: 75-3/4" W x 27" D
- Distance from front of table to center of blade: 14-7/8"
- Floor-to-table height: 34-7/8"
- Arbor diameter: 5/8"
- Arbor speed: 4000 RPM
- Max. width of dado: 3/4"
- Overall dimensions: 91-1/2" W x 75" D x 40-5/8" H
- Footprint: 22-7/8" L x 21" W
- Approximate shipping weight: 716 lbs.
- Digital readout for bevel angle
- Precision-ground cast-iron table
- Cast-iron trunnions
- 3/8" x 3/4" T-slots & miter gauge
- 4" Dust port
- Poly-V serpentine drive belt
- Steel cabinet with hinged motor cover
- Right hand and rear extension tables
- Magnetic switch with thermal overload protection and lock-out padlock
- Quickly changes between riving knife and blade guard/spreader assembly
- Certified to UL & CSA standards
- Includes 10" x 40T blade & push stick
-
Sale!
Out of stock
- Motor: 1 HP
- Swing: 9 in.
- Distance between centers: 22 in.
- Spindle bore: 25 mm
- Spindle type: Threaded
- Speeds: 100 – 2000 RPM
- Tailstock taper: MT#3
- Tailstock barrel travel: 2-1/2 in.
- Shipping weight: 453 lbs.
-
-
The World's First Universal Dust Collector
Named Best Dust Collector by Popular Mechanics 2020 Tool Awards Oneida Air Systems' new Supercell® dust collector is the tool shop owners have been dreaming of: a single system that efficiently and effectively captures and contains dust from every tool in the shop with a dust port size of 1” to 5”. The Supercell is ideal for handheld and portable tools - even small CNC routers. Its adaptable design mounts conveniently to the wall and can be installed virtually anywhere in the shop, connecting to tools by up to an astounding 100 feet of 4” hose and ductwork.Benefits & Features:
- 10x higher suction power than standard dust collectors, perfect for both handheld and benchtop tools with up to 5” dust ports.
- Combined 5HP fan blower motor operates at 230V with magnetic starter and overload protector.
- Accommodates simultaneous use of up to three tools with 1” to 2.5” dust ports.
- Wireless remote control operates at radio frequency - works through walls from up to 100' away.
- Ultra-high efficiency cyclone separator removes 99% of dust from the incoming airstream, virtually eliminating filter clogging and suction loss.
- HEPA-certified filter media rated at 99.97% efficient at 0.3 microns with non-stick, PTFE membrane.
- Internal pulse filter cleaner removes dust from the filter in seconds without needing to take the system apart for cleaning.
- Reinforced dust bin with automatic bag holder and fill level viewing window.
- Dust Sentry™ automatically alerts you when the drum is full and needs to be emptied.
- Mounts to wall with standard 16" stud spacing. Inlet rotates to match your shop's layout.
- Includes 25 feet of reinforced, 4" dia. vacuum-pressure rated flex hose.
Only use vacuum pressure rated flex-hose and duct with the Supercell dust collector. Under the system's high suction, standard hose/pipe may collapse causing affixed tools to be pulled towards the system, potentially causing damage and/or injury.
- UNIVERSAL COLLECTION – Combined 5HP fan blower motors easily accommodate the widest range of tools, including handheld sanders, table saws, and miter saws to jointers, planers, and even CNC routers with up to an astounding 100’ of 4” hose or ductwork.
- HEPA FILTRATION - Premium HEPA filtration rated at 99.97% efficient at 0.3 microns with non-stick, PTFE membrane. Internal pulse filter cleaner removes clogs in seconds without needing to take apart the system for cleaning. Plus, high-efficiency cyclone separator removes 99% of the dust before it even reaches the filter.
- FLEXIBLE USE – Available as a wall-mounted system with either a 14-, 35-, or 55-gallon collection bin, or as a mobile unit with a 14-gallon bin.
- INNOVATIVE FEATURES include wireless remote, pulse filter cleaner, dust bin with liner bag holder and fill level viewing window, Dust Sentry bin level sensor, and more – all in a compact footprint and profile. Patent Pending.
-
1 year warranty
-
From Oneida, the Supercell Turbo Charged, model XSK-414000, features everything you know and love regarding the original line of Supercell but features 30% more airflow. The Supercell Turbo is ideal for handheld and portable tools, especially small CNC routers. The adaptable design mounts easily to the wall and can be installed virtually anywhere in the shop, connecting to tools by up to an astounding 100' of 4" house or ductwork.
Features- 10x higher suction pressure than standard dust collectors and 30% more airflow over the classic Supercell
- Universal design collects from an 1" to 5" diameter port through up to 100' of hose and ductwork
- 14-gallon dust bin with automatic bag holder and fill level indicator
- HEPA-grade media filter with internal pulse filter cleaner
- Compact, wall-mounted design ideal for smaller shops with limited space
- Combined 6.7HP, 230V High Pressure Fan Motors
- Supports up to three 1" to 2.5" Dust Ports
- Wireless radio frequency remote control Key Fob
- Heavy-gauge steel cyclone pre-separator
- Internal pulse filter cleaner system
- Reinforced dust bin with viewing window
- Automatic bag holder system
- Dust Sentry bin fill level indicator
- NFPA compliance ready
- cETLus: certified to both U.S. and Canadian product safety standards by an NRTL
- Conforms to UL-1017 and Can/CSA-C22.2 # 243 standards
SpecificationsIncludes- Horsepower: 6.7HP
- Motor Type: 4x 1300W Modular Motors
- Voltage: 208-230V
- Recommended Breaker Size: 30A
- Amperage: 22A, 60Hz
- Phase: 1PH (single phase)
- Power Cord: 10', bare wiring - includes 2 hot and 1 ground for direct wiring plug not included
- CFM Rating: 536 CFM @ 2.3" WC, Free Fan CFM: 634 CFM
- Maximum Suction: 97.8WC
- HEPA certified, E12 Minimum Efficiency rating, Merv Rating - MERV 16+
- Total Filtration Area: 40sq ft.
- Waste Capacity: 14 gallon
- Built with cold rolled steel and seam welded
- Static Resistance Rating: Conductive (metal)
- Inlet: 4" O.D.
- Discharge Port: 5" O.D.
- Overall Dimensions: 20" w x 23"d x 61" h allow additional 24" of clearance height for maintenance
- Wall mount bracket for 16" standard stud spacing
- 5 replacement bags
- 4"x25' Vacuum-rated SD urethane flex-hose
- Key Fob
- Blast gate
- Turn Key Clamp: 2 each
- Fan Motor Assembly
- Magnetic Starter
- Remote Control
- Cartridge filter
- Pulse Filter Cleaner
- Cyclone Separator
- Dust Bin
- Dust Sentry bin fill level indicator
- Automatic bag holder system
Only use vacuum pressure rated flex-hose and duct with the Supercell Dust CollectorDue to systems high suction, standard hoses/pipe may collapse and cause damage to equipment or injuryWeight: 76lbsRemote Control is packed in the starter -
-
Out of stock
-
-
Out of stock
The Wilton Cold Front™ Atomized Cooling Fan holds strong against heat and humidity, so your team can safely get down to work. Powerful and portable, the Cold Front uses patented Flow Blurring® technology to instantly evaporate microdroplets and lower air temperature. That means better, more efficient cooling, without a noticeable increase in humidity. With the Cold Front, beating the heat just got easier. Please allow three weeks lead time. -
-
Put this 20" Planer in your shop without breaking the bank. Solid cast iron and steel construction and large planing capacity make this planer a true heavyweight. However, with a foot-operated caster system, you won't need to manhandle this planer around your shop. You'll also appreciate the 55-1/2" long precision-ground table, 5 HP motor and the two-speed gear box for maximum versatility. The G0454Z has a spiral cutterhead with 4-sided German-made carbide inserts for ultra smooth surfaces. CSA certified meeting CSA & UL standards! Note on replacement inserts:- For models manufactured April, 2015 and later, use H7319 replacement inserts.
- For models manufactured March, 2015 and earlier, use T21348 replacement inserts.
- Motor: 5 HP, 240V, single-phase, 19A
- Maximum stock width: 20"
- Maximum stock thickness: 8"
- Minimum stock thickness: 3/16"
- Minimum stock length: 8"
- Maximum cutting depth: 1/8"
- Cutterhead type: 4-row spiral, 98 inserts
- Insert size & type: 14mm x 14mm x 2mm, indexable carbide
- Cutterhead speed: 4800 RPM
- Feed rate: 16 FPM & 20 FPM
- Table size with extensions: 20" x 55-1/2"
- Dust port size: 5"
- Overall dimensions: 55-1/2" L x 39-1/2" W x 45-7/8" H
- Approximate shipping weight: 932 lbs.
- Built-in mobile base
- Precision-ground cast-iron table and extension wings
- Board return rollers
- Rubber-coated outfeed roller
- Adjustable bed rollers
- Magnetic switch with thermal overload protection
- Four-column support with table locks
- Two-speed feed rate
- Certified to CSA & UL standards
-
Out of stock
https://youtu.be/71kgEkUFmfk Whether it is before or after, often at welding workstations grinding on the work piece has to be done. But this is a messy proposition for most shops. The DDTM-5922 downdraft grinding table from Baileigh Industrial can help. This easy to use down draft table takes all the little partials that float around the shop and pull them straight down into a contained unit and also help to clean the air. What is unique about the DDTM-5922 metal working downdraft table is that it is a self-contained unit and there is no need to hook it up to external extraction systems. It operates on 110 volt power and has two .5hp motors that produce 1790 CFM per motor. That is a lot of sucking power to keep the area clean. The filters are also fire resistant on this grinding station making it very safe as well. Order this downdraft dust collector from Baileigh Industrial.- 59" x 22" downdraft table
- 3 mm thick stainless steelwork surface
- Perfect for grinding and sanding
- Dual motors 1790 CFM per motor
- Fire resistant air filters
- Easy clean out chip compartments
- 110V