- Designed with Hand Specific Tool Holders
- Padded Two Ply Tool Bags Keep Their Shape. NoSpill Tool Holder System
- Extremely Abrasion Resistant Industrial Nylon
- Hand-Specific Tool Holders Promote Maximum Working Rhythm on the Job
- Leather Tool Holders and Corner Reinforcing
-
Out of stock
-
Out of stock
- Fully adjustable for pant waist 32 to 41 Inch
- D rings pre-installed for use with suspension systems
- Hand specific tool holders promote maximum working rhythm on the job
- Designed with hand specific tool holders; Two ply bags keep their shape
- Tools are not included
-
Out of stock
- Hand-specific tool holders promote maximum working rhythm on the job
- Premium top-grain leather; Made in USA
- Copper rivets reinforce main bags ; Tool Bag Dimensions:Main Tool Bag:9 x 8(inches); Fastener Bag Dimensions-Outer Bag : 6inch x 5.5inch, Middle Bag : 7inch x 6inch, Upper Bag : 4.5inch x 4.5inch
- No Spill tool holder system; Function engineered for the modern builder
- Tools are not included
-
Sturdy and Secure
The Delta Power Tools 78-919BT2 Biesemeyer Fence is adjustable for fast accurate cuts time and time again. This fence system comes with a three-point locking system and comes with various features such as easy-gliding, steel tube fence body to handle quick, precision ripping and square cuts, the Delta Power Tools 78-919BT2 Biesemeyer Fence is ideal for fence attachments. -
Out of stock
Heavy-duty design built for the jobsite. The Mr. Heater Liquid Propane Forced Air Heater comes with a standard 10ft hose and regulator and all the safety you would expect of a Mr. Heater product. Equipped with factory installed high limit switches and thermoelectric safety valves, you can feel comfortable using these heaters on any jobsite. Just plug the heater into a 110v outlet, hook up the included hose and regulator to a 40lb (on low setting) propane tank or larger, and you are ready to take the chill out of any job.- 125,000 BTU per hour
- For use with propane gas
- Heats approximately 3125 sq ft
- Runs up to 11 hrs on 40lb tank (low setting)
- High temperature limit switch
- Continuous ignition
- QBT Technology - 50% Quieter than a standard propane heater
- 10ft hose and regulator included
-
-
Out of stock
Model 80-805: 8″ Low Speed Grinder & 80-910 Stand
• Powerful 1/2 HP Motor • Low Speed 1,750 RPM • Adjustable Tool Rests • Adjustable Safety Eye Shield and Spark Resistors
1/2 HP Low Speed Bench Grinder #80-805 has more than enough power for small workshops and for carpenters, turners, carvers and other craftspeople working with hand tools. Its left tool rest includes a groove in its design for the sharpening of drill bits. Wheel flanges are stamped. Grinder includes a diamond faced wheel dressing tool.Model 80-910 Stand
- Adjustable Height 28" - 36" - 2" Diameter Steel post with cast iron base - Storage for two grinding wheels - steel top measures 12" x 9 1/4" with 1/2" wide slots for mounting grinders -
The DELTA 50-289 mobile machine base for Unisaw lets you easily and safely move your machines out of the way when not in use, so you'll be able to maximize the space in your shop. The 50-289 fits DELTA Unisaws with 52-inch Unifence and adds rolling portability. The mobile machine base features a foot-operated control lever that lets you easily raise and lower the base for either moving or locking it in place. When lowered into position, the base has adjustable foot pads to ensure even contact with the floor.- Heavy-gauge steel and features a foot-operated control lever that raises and lowers the base for easy movement and positioning
- For UNISAWS with 50-inch/52-inch Fences
- 20-5/8-inch by 20-5/8-inch Combines 50-273 and 50-284
- Mobile base for Older Unisaws PRE-2009 with 52-Inch fence assembly, 1 crank handle mounted on front and other handle mounted on the side of the cabinet.
- Mobile machine base includes base, control lever, and adjustable foot pads
-
Out of stock
1 HP portable dust collector #60-105 is a great size and adaptable for many uses that a small shop encounters. Single 4 In. dust port draws 660 CFM, more than enough vacuum power for big chip makers, like jointer and planers. Built-in casters and handle make moving it about easy. Features an adjustable pipe extension with chip collecting funnel that can be positioned high for use with lathes, drill presses, workbenches etc. Includes 2 micron cloth filter bag, 108 In. long x 4 In. dust hose, adjustable pipe & funnel attachment system, safety on/off switch, and wall mounting brackets. 1 HP develops 660 CFM 4 In. dust port inlet for attaching to a single machine Includes casters for easy mobility around the shop Includes adjustable pipe & funnel system for dust collection use with lathes, drill presses, workbenches, etc. can be positioned up to 55 In. high. -
The Delta Mobile Base For 36-L336 36 in. UNISAW (For Dual Front Crank Unisaws) is essentially for easily moving your Delta Unisaw. Made from Steel in the US.- Adds mobility to your saw in your workshop
- Adjustable feet provided for leveling saw
- Heavet duty steel, designed specifically for this new Unisaw
-
Out of stock
- Vacuum operating button locks vacuum force
- Twin leveling toggles make surface alignment easy
- Steel threaded spindle is precision machined
- cold drawn profile guide rails for smooth powerful clamping
- Ergonomic grip 2 component handle
-
Out of stock
