| Item Number | DC-1450C |
|---|---|
| Shipping Weight | 295lbs |
| CFM | 1450 |
| Dust Collection Port | 6" x 4" |
| Number of Outlets | 2 |
| Drum Capacity (Gallon) | 28 |
| Remote Start | Yes |
| Power | 220V Single Phase |
| Horse Power | 2 |
| Noise Level ( @ 3 meters) | 76 dB |
| Shipping Dimensions (Inches) | 48x45x46 |
-
* specifications subject to change without notice. -
Out of stock
The Ashley Hearth AP60 is a fully automated pellet stove with auto ignition and easy to use electronic controls. It comes with an exhaust blower for negative draft that pulls flue products through and out to eliminate smoke spillage while an automatic circulation blower spreads heat evenly. The digital controls on this stove also allow you to hook up a wall mount thermostat for easier adjustments. It also has a wireless remote control to allow you to adjust your stove from your recliner! It’s durable yet sleek design is built for years of high performance and to blend nicely with any room setting and designed to provide your home with the desired warmth even in the coldest of climates. Heating your home with this unit ensures that you are doing your part to conserve our nation’s primary energy resources. Pellet heaters work by using a software driven control board to precisely deliver a pre-determined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home.
default.jobtemplate.hls.m3u8
-
All-new for 2021, the Laguna JX|8 QuadTec I is loaded with highly desirable features to make jointing safer and more enjoyable. The JX|8 is available in 2 versions. This version is the 110 Volt 1.75 HP version. JX|8 Quadtec I Standard Features:- Parallelogram Table Adjustments - Table depth adjustments travel along an arc to keep the same distance to the cutterhead through its travel
- Emergency “Knee-Stop” - The new knee stop uses a body-length bar at knee height to shut off the JX jointer. This important safety feature allows the machine operator to stop the machine quickly at any position along the front of the machine while keeping hands on the workpiece
- New Ergonomic Machine Body - The new JX Series machine body has been redesigned with a “toe-kick” to allow the user to position themself closer to the machine tables and to move safer and easier along the length of the machine
- In-feed Support Roller - Infeed tables are now fitted with pull-out support roller to help support longer materials
- QuadTec I Cutterhead - The all-new QuadTec I cuttherhead comes as standard equipment on the new JX-8 QuadTec I jointer. The QuadTec I produces an amazing surface finish on all woods including difficult hardwoods. The QuadTec I uses 4-sided carbide insert knives that are quieter and much more durable compared to straight HSS knives. The 4-sided knives can be rotated for a new cutting edge without the need for a knife setting jig
- Built-In Wheels - No need to purchase a separate mobility kit
- Cast-Iron Tables and Fence
-
* specifications subject to change without notice.tem Number DC-2100C Shipping Weight 385lbs CFM 2111 Dust Collection Port 8" x 4" Number of Outlets 3 Drum Capacity (Gallon) 63 gallon Remote Start Included Power 220V Single Phase Length 48" Width 31.5" Height 83" Horse Power 3 Noise Level ( @ 3 meters) 83dB Shipping Dimensions (Inches) 69x44x63 -
We designed the DC-2100C to be the best dust collector for heavy full-time shops. The 3 HP Cyclone Dust Collector will run 8+ hours a day, stay cooler than competing machines, and keep your shop clean.- Mighty 3 hp motor runs on 220-volt single-phase power.
- Produces a whopping 2,111 CFM, more than twice as much capacity as our DC-1450C wood dust collector.
- Pulls enough airflow to overcome resistance caused by ducting.
- Efficient cyclone design doesn’t lose suction. This model is almost as powerful as our larger capacity bag-style DC-2300B.
- 1 micron filter traps even the finest particles and purifies your air.
- Filter canister traps fine dust and ensures that it won't get back into the shop.
- Use the hand crank system to clean the filter canister. Dust will fall into a plastic bag for disposal.
- 3 ports (8” x 4”) let you hook up multiple machines at once to the dust extractor.
- Comes with a grounding screw; just attach a copper wire and touch it to PVC hose to take away the charge.
- Remote-controlled start and shutoff lets you manage the dust collector while working on another machine.
- 63-gallon drum holds enough dust so that you don’t have to empty it too often.
- Quick-release lever allows the drum to slide right out for emptying.
- This cyclonic dust collector is so quiet you can have a conversation right next to it.
- Locking swivel casters on the base make this a portable dust collector.
- Covered by a 1-year parts warranty.
- Includes lifetime technical support by phone
-
- Motor: 3 HP
- Table size: 76" x 8"
- Table type: Precision-Ground Cast Iron
- Table adjustment: Parallelogram
- Cutterhead type: Helical
- Cutterhead diameter: 3-1/16"
- Max depth of cut: 1/8"
- Fence size: 4-1/2" x 38"
- Shipping weight: 487 lbs.
-
MTSF3362203-0130-52, Laguna Tools F3 Fusion 52in Rip Capacity Tablesaw The new Laguna F2 and F3 Table Saws are unlike any saw on the market. Having the same quality demands earned through the original fusion table saw, the new fusion line will not only impress but exceed the expectations you have come to expect from Laguna. With a completely redesigned trunnion and arbor controls that focuses on buttery smooth controls and longevity of the saw, we are sure this is the saw that will give you the perfect rip cut for many many years. 2 New Features Now Standard On F2 & F3 Fusions:- DRO For The Tilt Angle Of Blade
- Double Window With Hairline For Hi/Low Fence
- 52" Rip Capacity
- Industrial 14 Gauge Cabinet
- 3HP TEFC Motor
- 220V, Single-Phase, 60Hz Power Requirement
- Accessory Tables (Outfeed & Rip)
- Industrial Fence Rail
- Industrial Fusion Fence
- Premium Electrical & Hardware Components
- Premium Miter Gauge
- Cast Iron Fusion Trunnions
- Cabinet Mounted Arbor
- Cast Iron Table & Wings
- European Hi-Lo Fence
- Premium Zero Clearance Throat Plate
- Fusion Hi-Lo Dust Collection
- Magnetic Contactor Switch
- Quick-Release Blade Guard and Spreader
- Riving Knife Included
- Push Stick Included
- Miter Gauge Included
- Blade Changing Tool Included
- Integrated Tool Storage
- 10 x 60T Carbide-Tipped Blade Included
- Premium Arbor and Motor Bearing
- Outfeed Table - Coming standard with the Fusion F3, the outfeed table features dual miter slots and 2 supporting legs
- Cabinet Mounted Trunion - Adjusting the table to line up the miter guage has never been easier
- Industrial Grade Cabinet - The Fusion 3 features a heavy-duty cabinet for added rigidity and strength
- Industrial Fence and Rails - The fence glides effortlessly on the industrial strength steel fence rails
- Dust Port Size: 4 in.
- Blade Guard Dust Port Size: 1.5 in.
- Table Saw Type: Cabinet
- 220V, Single-Phase, 60Hz Power Requirement
- Maximum Blade Diameter: 10 in.
- Cutting Material: Wood
- Arbor Size: 0.62 in.
- Arbor Speed: 4500RPM
- Maximum Width Of Dado: 0.75 in.
- Blade Tilt Direction: Left
- Max Blade Tilt: 45°
- Maximum Depth Of Cut At 90°: 3.12 in.
- Maximum Depth Of Cut At 45°: 2.12 in.
- Max Rip Right Of Blade w/ Included Fence & Rails: 37 in.
- Max Rip Left Of Blade w/ Included Fence & Rails: 19.68 in
- Included Blade Information: 10" x 60T
- Riving Knife/Spreader Thickness: 0.09 in.
- Required Blade Body Thickness: > 3.0mm
- Required Blade Kerf Thickness: < 2.0mm
- Floor To Table Height: 34.9 in.
- Table Size With Extension Wings Width: 76.91 in.
- Table Size With Extension Wings Depth: 26.9 in.
- Distance - Front of Table To Center Of Blade: 13.46 in.
- Distance - Front of Table To Blade At Maximum Cut: 8.66 in.
- Main Table Size Thickness: 1.49 in
- Fence Type: Camlock T-Shape With Aluminum With European Hi-Lo Face
- Fence Size Length: 33.46 in.
- Fence Size Width: 15.94 in.
- Fence Size Height: 3.03 in
- Fence Rail Type: Aluminum Extrusion/Angle Steel
- Fence Rail Length: 67.87 in.
- Fence Rail Width: 3 in.
- Fence Rail Height: 2 in.
- Weight (Net): 405 lbs.
- Overall Width (Side-To-Side): 84.94 in.
- Overall Depth (Front-To-Back): 56.1 in.
- Overall Height: 42.91 in.
- Footprint Width: 48 in
- Footprint Length: 42.51 in.
- Space Required For Full Range Of Movement Width (Side-To-Side): 84.94 in.
- Space Required For Full Range Of Movement Depth (Front-To-Back): 56.1 in.
- Table: Precision-Ground Cast Iron
- Wings: Precision-Ground Cast Iron
- Cabinet: 14 Gauge Steel
- Trunnions: Cast Iron
- Body Assembly: 14 Gauge Steel
- Fence Assembly: Steel Body
- Rails: Industrial Steel
- Miter Gauge Construction: Cast Iron With Steel Bar, Alu Fence
- Guard: Steel And Clear Plastic
- Body/Cabinet Paint Type/Finish: Powder Coated
- Arbor Bearings: Sealed & Permanently Lubricated
-
1,500 Sq Ft Vent Free Cast Iron Natural Gas Stove – Black
Classic cast iron styling with a painted black finish makes this beautiful gas stove the perfect heating appliance for any living space. The Ashley Hearth AGC500VFN gas stove delivers 32,000 BTUs of heat in a safe and efficient way. Because it does not require a vent, it is 99% efficient ensuring you get your money’s worth every time you use this stove. A log set is included with this stove to give you a realistic fire look. In addition, this stove does not need electricity to operate, meaning it is the perfect stove to own if the power is out. Standard operation is simple, just turn the switch on, select your heat output and enjoy the warmth. This stove is simple to use and can be hooked up to any standard millivolt thermostat allowing it to cycle on and off as needed. The AGC500VF stoves can heat up to 1,500 Sq. Ft. and is available in natural gas or liquid propane (LP) models.default.jobtemplate.hls.m3u8
-
1,500 Sq Ft Vent Free Cast Iron Propane Stove – Black
Classic cast iron styling with a painted black finish makes this beautiful gas stove the perfect heating appliance for any living space. The Ashley Hearth AGC500VFLP gas stove delivers 32,000 BTUs of heat in a safe and efficient way. Because it does not require a vent, it is 99% efficient ensuring you get your money’s worth every time you use this stove. A log set is included with this stove to give you a realistic fire look. In addition, this stove does not need electricity to operate, meaning it is the perfect stove to own if the power is out. Standard operation is simple, just turn the switch on, select your heat output and enjoy the warmth. This stove is simple to use and can be hooked up to any standard millivolt thermostat allowing it to cycle on and off as needed. The AGC500VF stoves can heat up to 1,500 Sq. Ft. and is available in natural gas or liquid propane (LP) models.default.jobtemplate.hls.m3u8
-
The Laguna JX|8 ShearTec II is loaded with great features to make jointing safer and more enjoyable. It includes parallelogram table adjustments that travel along an arc to keep the same distance to the cutterhead. An emergency knee stop that uses a body-length bar at knee height to shut off the jointer allows the machine operator to stop the machine quickly at any position along the front of the machine, while keeping hands on the workpiece. The new JX Series machine body has been redesigned with a toe kick to allow the user to be positioned closer to the machine tables and move safer and easier along the length of the machine. Infeed tables are fitted with a pullout support roller to help support longer materials. The ShearTec II is a 6-row carbide insert cutterhead that produces a shear cut for superior surface finish on all woods, including challenging hardwoods. The ShearTec II knives and fasteners have a T-step design to maximize clamping force on the knives, preventing knife cracking and chatter. The ShearTec II cutterhead has deep grooves that make the cutterhead very quiet and improve shaving ejection.Specifications
- Motor: 220V, 3 HP, 1 phase, 60 HZ, 12 amp
- CSA: Yes
- Bed Size: 8" x 72"
- Infeed Table Pullout Extension: 8"
- Rabbeting Capacity: 1/2"
- Fence Size: 38" x 4-3/4" cast-iron
- Fence Tilt: 45°/90°
- Max. Depth of Cut: 1/8"
- Table Height from Floor: 31"
- Safety Bar Shutoff: Yes
- Wheels Built-In: Yes
- Dust Port Diameter: 4"
- Number of Knives: 54 four-sided carbide knife inserts
- Cutterhead RPM: 5,500
- Cutterhead Diameter: 3-1/8"
- Bed Adjustment: parallelogram
- Overall Dimensions: 75-1/2" x 26-1/2"
- Shipping Dimensions: 76" x 25" x 41"
- Net Weight: 380 lbs.
- Shipping Weight: 495 lbs.
-
The 13" Combination Brush/Drum is the answer to your production bottleneck. Developed with mouldings in mind, this versatile sander can tackle every step in your finishing process, from sanding raw wood to sanding in between coats of stain or primer. Read about other applications below. This model features a 1-3/4 HP motor, and can handle stock up to 4" thick, or as thin as 1/32". It can also be equipped with an optional sanding drum for surface sanding.- Raw Wood Sanding | White Wood Sanding
- Break sharp edges
- Open grain for even finish absorption
- Blend out minor defects
- Sealer Sanding | Primer Sanding | Scuff Sanding
- Removes raised fibers and grain (denib/defuzz)
- Degloss previously finished wood
- Clean reclaimed wood
- Wire Brushing
- Distress (weathered/Southwest finish)
- Pull out soft grain to create textured surface
Sanding Capacity: Maximum Width (in): 13 Minimum Length (in): 9 Maximum Thickness (in): 4, varies with drum/brush style Minimum Thickness (in): 1/32*Dimensions (in): 35L x 42W x 44HDrum (in): 5 x 13 extruded aluminum.Brush (in): 6-8 typical diameter.Speed: ranged variable RPM, 400-1200Dust Hood: 1- 4" port, hinged at back, 600 CFM min. recommendedConveyor Motor: 43 in.-lb. torque, ranged variable, 0-10 FPMDrive Motor (TEFC): 1-3/4 HPPower Requirements: 110 Volt, 20 amp serviceShipping Weight (lbs): 300 (approx., varies based on how equipped) - Raw Wood Sanding | White Wood Sanding
-
Out of stock
Designed for efficient switchovers between functions, this 12”-wide jointer/planer saves time, space, and money. With its cast iron table and steel base, the machine will last for many years.- 3 hp motor spins the head at 6,600 rpm to make quick work of any material.
- Includes a 2.75” helical cutter head with rotatable carbide blades.
- This type of head stays sharp for much longer and cuts more quietly than a straight-knife cutter.
- Runs on 220-volt single-phase power, so this jointer/planer combination machine will work almost anywhere.
- You can make fast changeovers between jointing and planning functions, since you don’t have to remove the fence.
- Machined cast iron table supports the material so it stays true for cutting.
- Extra-large rack and pinion aluminum fence can adjust to any angle between 45° and 90°.
- Large handwheel allows you to raise the planer table quickly and precisely.
- Rigid, fully-closed steel stand reduces vibrations to give you clean, accurate results over a long lifetime of use.
- Dust ports can hook up to your dust collection system to keep your shop clean and make the air safely breathable.
- Covered by a 1-year parts warranty.
- Replacement parts are in stock for fast shipping.
- We include lifetime technical support by phone. Call up our team of experienced woodworkers when you have project questions or problems.