-
Out of stock
Good things come in small packages and the US Stove 5501S pellet stove is sure to continue that tradition. By combining a full size burning system with a small cabinet and hopper, the 5501S combines the best of both worlds. It can heat up to 2,200 sq. ft. yet its small footprint and clearances allow it to fit easily into smaller areas. Upgraded digital controls with a remote control make this stove easy to adjust. The ceramic glass window comes with an air wash system to keep the fire viewable. The 20 LB. hopper provides up to 13 hours of burn time and because of its size, you will get fewer auger jams due to collapsed pellets. Pellet heaters work by using a software driven control board to precisely deliver a predetermined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home. -
-
Laguna’s 6|89T Edge Sander is a horizontal/vertical sanding machine with swing function of the sanding belt. It features a 10” x 12” end table with dust shroud, a footprint of only 51” x 20” x 45”, and a belt speed of as high as 3,900 RPM.
Motor: 1.5 HP, 110 V, 18 amp
RPM: 3,450, Belt Size: 6” x 89”
Front Table: 10” x 30”
Table Heights: 38” min. – 41” max.
Platen Tilt: 0º – 90º
Platen Size: 7” x 33” (graphite)
End Table: 10” x 12”
Belt Speed: 3,900 RPM
Oscillation: 1/2”, Dust-Port: 4”
Dimensions: 51” x 20” x 45”
Weight (Net/Ship): 258/273 lbs
-
Out of stock
Clean lines, gentle curves and modern technology meet with the AP5780E. This slim line pellet stove is designed to fit into tighter spaces yet produces the same amount of heat as a full size pellet stove. It can heat up to 2,200 Sq. Ft. The all digital control system comes with a temperature readout and a remote control for simple adjustments. It comes with a 46 Lb. hopper to provide up to 32 hours of burn time between fillings. This stove is a show piece with its curved black sides and flat black accents. Pellet heaters work by using a software driven control board to precisely deliver a pre-determined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home. SpecificationsProduct EPA Approved Yes Product Heating Area (ft²) 2200 Product Cooktop No Product Air Wash System Yes Product Package Contents Pellet Stove, Remote Control Product Ash Drawer No Product UL Listed Pending Product ETL Listed Pending Product Blower Yes Product Catalytic/Non Catalytic Non Catalytic Product Vent Location Rear Product Stove Type Freestanding Product Auto Ignition Yes Product Maximum BTU 48000 Product Hopper Capacity (ft³) 46 Product Brick-Lined Firebox No Product Venting Required Yes Product Touchpad Controls Yes Product Wood Or Pellet Burning Pellet Product Vent Diameter (in) 3 Product Color / Finish Black Product Manufacturer Warranty Limited Lifetime firebox warranty, 1 Year all other parts, 1 year Electrical parts Product CSA Certified Yes Product Vented Or Vent-Free Vented -
Out of stock
The Ashley Hearth AW3200E-P is an extra large wood burning stove with 152,000 BTUs of heat. This beautiful 3/16 inch steel stove is also one of the cleanest burning, EPA certified stoves on the market (without catalyst). It’s clean lines and simple design compliment many interior designs. The AW3200E-P comes with a 100 CFM blower to help distribute heat evenly. This wood burning stove features a large pedestal base with integrated ash pan and a large, arched glass window with brushed nickel door handle. The AW3200E-P wood stove meets the stringent requirements of the EPA “Step 2” 2020 Certification Guidelines. The AW3200E-P model replaces the previous Vogelzang TR007 wood-burning stove.default.jobtemplate.hls.m3u8
-
Out of stock
This cannister-style dust collector system is strong enough to handle multiple machines at once, such as planers, sanders, and table saws. Get 2,300 CFMof suction 8 hours a day for a low price.- 3 hp motor runs on 220-volt single-phase power.
- This woodworking dust collector produces a robust 2,300 CFM. You can feel the machine pulling air towards it!
- Integrated all-steel ducting provides smooth airflow. No ridges to cause drag and dust buildup.
- 1 micron Lannister type filters on the upper half of the unit remove particles from the air to protect your lungs.
- 2 large bags give you more volume, so you don’t have to empty them as frequently.
- 3 dust ports (8” x 4” in size) let you hook up several hoses and machines at the same time.
- 4 locking swivel casters, along with conveniently located handles, allow you to move the machine without difficulty.
- It takes just an hour to an hour and a half to set up this dust extraction system.
- Covered by a 1-year parts warranty.
- We provide lifetime technical support by phone. Call up our team of experienced reps whenever you need machine help.
* specifications subject to change without notice. INCLUDES TWO 1 MICRON CANNISTER FILTERS. This is the perfect add on to the Baileigh Industrial line of bag style dust collectors for those small shops or schools that are concerned about air quality. This industrial dust collector canister filter has more surface area than a bag filter, giving you more filtration between your lungs and shop dust.Item Number DC-2300B Shipping Weight 230lbs CFM 2300 Dust Collection Port 8" x 4" Number of Outlets 3 Drum Capacity (Gallon) 30 Power 220V Single Phase Horse Power 3 Noise Level ( @ 3 meters) 88dB Shipping Dimensions (Inches) 69x44x28 Item Number DC-Canister Filter Filter Type 1 Micron Canister Filter Size 19.5" OD x 26.5" High Special Notes -
Out of stock
Overview
Perfect for the small shop or woodworking enthusiast, the SuperMax 19-38 Drum Sander reduces the tedium of hand sanding, speeds up the sanding process, and produces more consistent results! Find out how it compares to other brands, watch videos and more! Machine Overview The 19-38 Drum Sander comes standard on the Open Stand. The drum is pre-wrapped with 80 grit sandpaper. Additional accessories and sandpaper are available for purchase. Full machine features and specs can be found below.Award Winning
The 19-38 Drum Sander was awarded 5 out of 5 stars by WOOD magazine, and received the Editor’s Pick award from American Woodworker magazine.19-38 Drum Sander vs. Other Brands
The 19-38 Drum Sander was designed with five exclusive features to increase ease-of-use and functionality! Compare the 19-38 sander to other brands. -
* specifications subject to change without notice.Item Number DC-600C Shipping Weight 230lbs CFM 600 Number of Outlets 2 Drum Capacity (Gallon) 20 Power 110V Horse Power 1.5 Noise Level ( @ 3 meters) 75dB Shipping Dimensions (Inches) 48x45x40 -
Out of stock
1,200 Sq. Ft. Wood Stove Insert
The Ashley Hearth Products AW1820E is an air tight fireplace insert that will greatly improve the efficiency of your fireplace. The AW1820E fireplace insert meets the stringent requirements of the EPA “Step 2” 2020 Certification Guidelines. With a heavy cast iron door with a cool touch wood handle, and an air washed ceramic glass that allows a magnificent view of the burning fire, it will be a beautiful addition to your existing hearth. It comes with the hearth surround to fully enclose the existing fireplace, and is equipped with a spring loaded automatic adjustment to make installation a breeze. The Ashley AW1820E model replaces the previous Vogelzang model TR004 Colonial fireplace insert and the US Stove Company model 2200IE insert.default.jobtemplate.hls.m3u8
-
Out of stock
The KP130 is a fully automated pellet stove with auto ignition and easy to use electronic controls. It comes with an exhaust blower for negative draft that pulls flue products through and out to completely eliminate smoke spillage, an automatic circulation blower to spread heat evenly and an optional fresh air intake that is sold separately. Its durable yet sleek design is built for years of high performance and to blend nicely with any room setting and designed to provide your home with the desired warmth even in the coldest of climates. The KP130 burns a carbon-neutral, green fuel, considered environmentally friendly. These fuels are clean, easy to handle, store, and are, otherwise, waste products from the timber and agricultural industries. Heating your home with this unit insures that you are doing your part to conserve our nation’s primary energy resources. Pellet heaters work by using a software driven control board to precisely deliver a pre-determined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home.default.jobtemplate.hls.m3u8
-
506601, LAGUNA TOOLS 6IN, SHEARTECH II JOINTER
The Laguna JX|6 QuadTec I is loaded with highly desirable features to make jointing safer and more enjoyable. Features:- Parallelogram Table Adjustments – Table depth adjustments travel along an arc to keep the same distance to the cutterhead through its travel
- Emergency “Knee-Stop” – The new knee stop uses a body-length bar at knee height to shut off the JX jointer. This important safety feature allows the machine operator to stop the machine quickly at any position along the front of the machine while keeping hands on the workpiece
- New Ergonomic Machine Body – The new JX Series machine body has been redesigned with a “toe-kick” to allow the user to position themself closer to the machine tables and to move safer and easier along the length of the machine
- In-feed Support Roller – Infeed tables are now fitted with pull out support roller to help support longer materials
- QuadTec I Cutterhead – The all-new QuadTec I cuttherhead comes as standard equipment on the new JX-6. The QuadTec I produces an amazing surface finish on all woods including difficult The QuadTec I uses 4-sided carbide insert knives that are quieter and much more durable compared to straight HSS knives. The 4-sided knives can be rotated for a new cutting edge without the need for a knife setting jig
- Built-In Wheels – No need to purchase a separate mobility kit
- Cast-Iron Tables and Fence
THE BRAND NEW QUADTEC:I IS DESIGNED TO OFFER AN AMAZING FINISH ON THE MOST DIFFICULT SPECIES OF WOOD
The inserts are solid carbide (14x14x2mm) so they can be rotated 4x to extend the already longer life Compared to HSS. The inserts are mounted on a straight line requiring less machining thus saving cost. The QuadTec: I is also quieter than conventional straight knives. Each insert is indexed requiring no jig when rotating or replacing. Specifications:- Motor: 110V 1.5HP 1 Phase 60hz/13 Amp
- CSA: Yes
- Bed Size: 60″ x 6″
- Infeed Table Pull-Out Extension: 8″
- Rabbetting Capacity: 1/2″
- Fence Size: 29″ x 3-3/4″ Cast Iron
- Fence Tilt: ±45/90°
- Max. Depth Of Cut: 1/8″
- Table Height From Floor: 31″
- Safety Bar Shut-Off: Yes
- Wheels Built-In: Yes
- Bracket To Mount Light: No
- 110V Outlet For Light: No
- Bracket To Mount Feeder: No
- Dust Port Diameter: 4″
- Cutterhead Insert #: 12 x 4-Sided Carbide, 4-Row
- Cutterhead RPM: 5500
- Cutterhead Diameter: 2-1/2″
- Bed Adjustment: Parallelogram
- Dimensions Set Up (Approx): 63″ x 22″
- Dimensions Shipping: 65″ x 22″ x 13″ + 31″ x 16″ x 27″
- Net/Ship Weight: 161/174 Lbs + 88/94 Lbs (2 Boxes)
-
Out of stock
Overview
Perfect for the small shop or woodworking enthusiast, the SuperMax 19-38 Drum Sander reduces the tedium of hand sanding, speeds up the sanding process, and produces more consistent results! Find out how it compares to other brands, watch videos and more! Machine Overview The 19-38 Drum Sander comes standard on the Open Stand. The drum is pre-wrapped with 80 grit sandpaper. Additional accessories and sandpaper are available for purchase. Full machine features and specs can be found below.Award Winning
The 19-38 Drum Sander was awarded 5 out of 5 stars by WOOD magazine, and received the Editor’s Pick award from American Woodworker magazine.19-38 Drum Sander vs. Other Brands
The 19-38 Drum Sander was designed with five exclusive features to increase ease-of-use and functionality! Compare the 19-38 sander to other brands. Includes SUPMX-71938-DRO and SUPMX-71938-7F Folding Infeed/Outfeed Tables
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com