Powermatic – Page 2 – CT Power Tools

Powermatic PJ-882HH Jointer, 2HP 1PH 230V 1610082

$4,519.99

Number of Knives	54
Helical Knife Size (L x W x T) (In.)	15 x 15 x 2.5
Cutterhead Diameter (In.)	3-1/16
Cutterhead Speed (RPM)	7,000
Cutting Capacity (W x D) (In.)	8 x 1/2

Table Size (L x W) (In.)	82 x 8
Table Height from Floor (In.)	31-5/16
Infeed Table Length (In.)	44
Outfeed Table Length (In.)	38
Rabbeting Capacity (In.)	NA
Fence Size (L x H) (In.)	44-3/4 x 38-3/16
Fence Tilt (Deg.)	45 Forward, 45 Backward
Fence Positive Stops (Deg.)	45, 90, -45
Dust Collection Minimum CFM Required (CFM)	450
Dust Port Outside Diameter (In.)	4
Motor Power (HP)	2
Motor Phase	1
Motor Voltage (V.)	230 only
Motor Current (Amps)	9
Recommended Circuit Size (Amps.)	20

Details

Out of stock

POWERMATIC 6472335 -BALDOR MTR 5HP1PH 3450RPM-184C 72A/74A

$1,499.99

Baldor replacement motor
Fits table saws models 66, 72A, and 74
Features 230-volt, 1-phase, 3600 RPM

Details

HTC Adjustable Mobile Base HTC2000

$129.99

Rugged 500-lb capacity so your heavy machines are now mobile
Expands from 12 x 12 inches to 36 x 36, and can go up to 20 x 52 - all in one-inch increments
Easy-to-use foot levers lock and unlock wheels for rock-solid stability
3-inch heavy-duty rubber wheels
Low profile increases machine height by less than 1 inch so it won’t interfere with tool operation
Maximum square size: 34 x 34 inches

Add to cart Details

Out of stock

Powermatic 1791079K PM1300TX-CK Dust Collector 1.75HP 1PH 115/230-Volt 2-Micron Canister Kit

$1,349.99

The Powermatic’s PM1300TX-CK dust collector has a 1.75-horsepower motor, a collection capacity of 10 cubic feet, and a sound rating of 75 to 90 decibels--and its exclusive TurboCone technology improves chip separation to prevent clogging of the filter and increases packing efficiency of the collector bag. The PM1300TX-CK provides a combination of power and simplicity that makes it both productive and easy to use.

Turbo Cone improves chip separation and collector bag packing efficiency
The cone eliminates premature filter clogging for sustained performance
Remote-controlled digital timer can be programmed for up to 99 minutes
Canister filter offers over six times filtering surface area of standard bags
All-metal duct construction for rigidity and improved air flow

Details

Out of stock

Powermatic PM1500 Bandsaw, 3HP 1PH 230V Stk # 1791500

$3,849.99

Details

Out of stock

Powermatic 1791279DXK Model 54A Jointer, 1HP 1PH 115/230V

$1,899.99

Number of Knives	3
Standard Knife Size (L x W x T) (In.)	6-1/6 x 3/4 x 5/64
Cuts Per Minute	18,000
Cutterhead Speed (RPM)	6,000
Cutting Capacity (W x D) (In.)	6 x 1/2

Table Size (L x W) (In.)	66 x 7-1/4
Table Height from Floor (In.)	31-1/2
Infeed Table Length (In.)	32-1/2
Outfeed Table Length (In.)	32-1/2
Rabbeting Capacity (In.)	1/2
Rabbeting Ledge (In.)	9 x 2-1/2
Fence Size (L x H) (In.)	38 x 4
Fence Tilt (Deg.)	45 Forward, 45 Backward
Fence Positive Stops (Deg.)	45, 90, -45
Dust Collection Minimum CFM Required (CFM)	600
Dust Port Outside Diameter (In.)	4
Motor Power (HP)	1
Motor Phase	1
Motor Voltage (V.)	115/230
Prewired Voltage (V.)	115
Motor Current (Amps)	13/6.5
Recommended Circuit Size (Amps.)	20/10

Details

Out of stock

Powermatic 2042374 Mobile Base, 60HH/60A & 54A/54HH JOINTERS

$394.99

The Mobile Base adds a new dimension of flexibility to your Powermatic machines. Equipment previously considered immovable can easily be moved by only 1-person rearrange your shop for special projects in just minutes. Made of heavy-duty all welded steel tubular frame and independently locking, non-marking wheels.

Heavy-duty frame is welded tubular steel for strong support
Steel wheels provide easy mobility, independently lock for stability
Length: 24 in.
Width: 13.75 in.

Fit these jointers: 710144 60HH 1610084K 60HC 1791317K 54HH 1791279DXK 54HA

Details

Out of stock

Powermatic 1280102C PM2700 SHAPER, 5HP 3PH 230/460V

$4,899.99

The PM2700 Shaper offers more features to you than any other shaper in the same class. The extra large 30" x 40" precision ground cast iron table includes a heavy duty miter gauge with an aluminum extruded support. The built-in, omni-directional caster system (patent pending) is retractable into the base. A quick-release lever allows fast speed and belt changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need. Adding to the precision of this machine is a digital readout for the spindle height. This allows making adjustments to within .001" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.

Details

Out of stock