90 Days – Parts; Consumable items
1 Year – Motors, Machine Accessories
2 Year – Woodworking Machinery used for industrial or commercial purposes 5 Year – Woodworking Machinery
-
Out of stock
This 1,300-pound heavy duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives, and has a 5” dust port for easy attachment to any dust collection system. The cutterhead is a helical design with 125 four sided knife inserts – these produce a superior finish and much quieter operation compared to conventional cutterheads, and the inserts are installed without further adjustments. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. Infeed and outfeed rollers are fitted with roller bearings for long life. The sectional infeed roller and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed rollers facilitate both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. The massive, ribbed cast iron table is ground finished and rises smoothly via the hand wheel. With a hefty 7-1/2 horsepower motor, the 201HH Planer is perfect for the small to medium shop with continuous planing requirements. Product Listing with Warranty Period -
Out of stock This 1,300-pound heavy duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives, and has a 5” dust port for easy attachment to any dust collection system. The cutterhead is a helical design with 125 four sided knife inserts – these produce a superior finish and much quieter operation compared to conventional cutterheads, and the inserts are installed without further adjustments. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. Infeed and outfeed rollers are fitted with roller bearings for long life. The sectional infeed roller and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed rollers facilitate both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. The massive, ribbed cast iron table is ground finished and rises smoothly via the hand wheel. With a hefty 7-1/2 horsepower motor, the 201HH Planer is perfect for the small to medium shop with continuous planing requirements. Product Listing with Warranty Period90 Days – Parts; Consumable items 1 Year – Motors, Machine Accessories 2 Year – Woodworking Machinery used for industrial or commercial purposes 5 Year – Woodworking Machinery
-
Out of stock
This 16-Inch jointer offers big capacity and performance in a machine that is loaded with features. Large center-mounted fence assembly adjusts easily on a rack and pinion system with ram lock. Preset stops on the fence body allow for fast angle set-up at 45-degree in and out, and a positive stop for perfect 90-degree angles. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also ensures the tables remain perfectly parallel even after years of tough duty. The specially designed solid steel helical cutterhead consists of six rows of precision ground staggered inserts. This system makes fast work of knife changing and never needs adjustment. The heavy-duty 7-1/2 HP motor delivers all the power you need for even the biggest jobs. -
Out of stock
The JET has-1452 delivers the strength and accuracy Your shop demands in a rugged, steel framed hydraulic Shear. Capable of making the big cuts, and versatile enough to handle just about any job you need completed. The low angle blade design ensures smooth cuts along the precision-aligned bed and beam. -
Out of stock
- Motor HP: 10 HP
- Phase: 3
- Voltage: 220V
- Amps: 28 Amps
- Hertz: 60
- Plug: No
- RPM: 3450
- Main Motor Switch: Radio Frequency
- Control Panel: Anodized Aluminum
- Hand Held Remote Control: HF (High Frequency)
- LED Warning Light Empty Drum: Yes
- Canister Auto Clean controlled by Timer: Yes
- Shop Setting CFM: 4700
- Inlet CFM: 8070
- Max Static Pressure (inches of water): 11″
- Impeller/Fan Size: 15.5″
-
The EDWARDS 50 Ton Ironworker 1 Phase 230 is a Compact machine that allows for fast and easy transitions between fabrication operations: punch, shear, notch, bend and cope all in one machine. Optimized workstation heights for improved efficiency. Electric foot pedal with integrated jog control. Adjustable electric stoke control. -
Out of stock
The new TS29 Tilt/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs. -
Out of stock
The JET JTM-4VS Mill is a variable speed vertical milling machine that is engineered to provide precision and reliability. MEEHANITE® castings, a heavy-duty splined motor and three-stage power downfeed with automatic stop are a few of the features loaded onto this JET mill. JET mills deliver performance and precision and are backed by an industry leading 2-year warranty. -
Out of stock
- Wide assortment of finger widths allow greater versatility in the shop
- With fingers installed it can be used as a full-length nose bar, turning the Machine into a straight bending brake
- All body sections are welded Steel plate with heavy truss rods and braces designed to give greater strength and durability
- Both the bed and apron are bored in line to assure the utmost accuracy
- Counter weights can be moved up or down to adjust desired leverage
-
Door builders and cabinet shops will love the extra capacity of this 37" wide-belt sander. Available with 15 HP 3-phase sanding motors, these wide-belts are built for daily industrial use with features such as a heavy-duty steel cabinet, pneumatic belt oscillation, and a built-in air filter/regulator. The digital control pad automates table adjustments and is accurate to 0.005". Also, the variable-speed conveyor, adjustable oscillation controls, and adjustable graphite/felt platen easily allow the operator to find the perfect combination of settings to achieve soft, smooth finishes on all types of wood. -
Out of stock
Jet Vertical Milling Machines perfrom slot and keyway cutting, planning, drilling, diesinking, rebating and routing with surgical accuracy. With the addition of the Acu-Rite 200S 2 axis digital readout makes this unit readily useable for most applications. -
Out of stock
Description
Numeric control pad and digital readout provide the ultimate in precision. Other features include quick-change belt system with automatic belt tensioning, air-controlled automatic belt tracking system, motorized table elevation control, adjustable air-controlled belt oscillation system, and load meter. Certified to CSA and UL standards.Specifications
- Sanding motor: 10 HP, 220V, single-phase, 1725 RPM, 50A
- Feed motor: 1 HP, 220V, single-phase, 1725 RPM, 7A
- Elevation motor: 1/3 HP, 220V, single-phase, 1725 RPM, 3A
- Drum speed: 3550 FPM
- Drum diameter: 8"
- Feed rate: variable, 15–49 FPM
- Max. stock width: 24"
- Max. stock thickness: 6"
- Min. stock thickness: 1/8"
- Required air pressure: 75 PSI @ 7 CFM
- Sanding belt size: 25" x 60"
- Dust port: (2) 4"
- Emergency stop bar with brake
- Manual and motorized table elevation control
- Sanding load meter
- Digital readout and controls
- Made in an ISO 9001 factory
- Footprint: 39-1/4"W x 19-1/4"D
- Height with dust ports: 71"
- CSA certified meeting CSA C22.2 #105–1953 and UL 987–7 standards
- Approximate shipping weight: 1870 lbs.
California Proposition 65 Warning