Powermatic 4224B 1794224K Lathe

Motor and electricals:
Motor type ……………………………………………………………………………………………totally enclosed fan cooled, induction Horsepower………………………………………………………………………………………………………………………….3 HP (2.2 kW) Phase ……………………………………………………………………………………………………………………………………………….3 PH Voltage ……………………………………………………………………………………………………………………………………………. 220V Cycle ………………………………………………………………………………………………………………………………………………. 60Hz Listed FLA (full load amps)………………………………………………………………………………………………………………….. 10 A Starting amps ……………………………………………………………………………………………………………………………………… 6 A Running amps (no load) ……………………………………………………………………………………………………………………….. 3 A Power transfer……………………………………………………………………………………………………….poly V-belt, inverter drive On/off switch……………………………………………………………………………………………………. mushroom style push button Motor speed ………………………………………………………………………………………………………………………………1720 RPM Variable frequency drive (inverter) ……………………………………………………………………………..2.2kW, 230V, 1 or 3 PH Power cord ……………………………………………………………………………………………………………………3/C 14AWG (300V) Power cord length ………………………………………………………………………………………………………………….. 6 ft. (183cm) Power plug installed ……………………………………………………………………………………………………………………………….no

Power requirements ……………………………………………………………………………………………………….. 220V, 3PH or 1PH 1

Recommended circuit size ………………………………………………………………………………………………………………….. 20A Noise emission, without load …………………………………………………………………………… 78 dB at 20 inches from motor Task lamp wattage, maximum………………………………………………………………………………………………………………..100 Quad receptacles ……………………………………………………………………………………………………………………….10A, 115V

1 subject to local/national electrical codes.

Capacities:
Working distance between centers …………………………………………………………………………………………. 42” (1067mm) Working distance between centers, optional 20” bed ext. mounted………………………………………………62” (1575mm) Working distance between centers, optional 63” bed ext. mounted…………………………………………….105” (2667mm) Maximum distance between spindle face and tailstock quill …………………………………………………..46-1/2” (1181mm) Swing over bed……………………………………………………………………………………………………………………….24” (609mm) Swing over tool rest base……………………………………………………………………………………………………19-1/4” (490mm) Outboard turning diameter, maximum………………………………………………………………………………………88” (2235mm) Number of indexing positions …………………………………………………………………………………………………………………..98

Headstock and Spindle:
Spindle taper ……………………………………………………………………………………………………………………………….#2 Morse Spindle thread size………………………………………………………………………………………………………………….1-1/4 x 8 TPI Spindle speed (RPM) ………………………………………………variable; High: 135-3500; Medium: 80-2000; Low: 40-970 Outboard external threads…………………………………………………………………………………………………….. M35 x 1.5UNF Headstock spindle bore………………………………………………………………………………………………………….5/8” (15.9mm) Spindle direction………………………………………………………………………………………………………………….forward/reverse Chuck vacuum pressure……………………………………………………………………………………………….21 in/HG (53 cmHG) Air hoses ………………………………………………………………………………………………………………………..8mm O.D., 120psi Air supply required ………………………………………………………………………………………………………………90 psi (2-3 cfm) Air supply coupler …………………………………………………………………………………………………………………………. 1/4″NPT

T ailstock:
Tailstock quill taper……………………………………………………………………………………………………………………….#2 Morse Tailstock bore…………………………………………………………………………………………………………………………3/8” (9.5mm) Tailstock quill travel……………………………………………………………………………………………………………..4-1/2” (114mm)

Materials: Legs…………………………………………………………………………………………………………………………………………….cast iron Bed……………………………………………………………………………………………………………………………………………..cast iron Headstock …………………………………………………………………………………………………………………………………… cast iron Tailstock………………………………………………………………………………………………………………………………………cast iron Headstock spindle………………………………………………………………………….hardened HRC50 on nose of thread, steel Tailstock quill………………………………………………………………………….hardened HRC20 steel, with laser etched scale