-
The Fusion F3 table saw is built with no compromises. This heavy-duty cabinet saw features a 3HP/220V motor for all your wood cutting needs.Permanently lubricated bearings and Acme screws on the inside and a precision-ground cast iron table with cast iron upper and lower trunnions mean this saw is built to last from the inside out. Precision-ground cast iron table wings and 14-gauge steel cabinet complete the package.Integrated dust collection keeps your work surface clear by utilizing dust collection over and under the blade along with a sealed base.The digital readout allows for precise blade tilt adjustment and the fence features a Hi/Low window for easy set-up and accurate cuts.The on-board tool storage system keeps all the accessories including the industrial Fusion fence, European Hi-Lo fence, miter gauge and push stick neatly stowed when not in use. While the built in mobile base allows you to move and store your saw wherever you need it.Includes Laguna Fusion F3 Table Saw, Outfeed Table Attachment, Right Wing Table, 10” x 60T Saw Blade, European Hi-Lo Fence, Industrial Fusion Fence, Dust Collection Guard, Premium Miter Gauge, Blade Guard, Arbor Wrench, Riving Knife, Push Stick, Blade Changing Tool and Premium Zero Clearance Throat Plate.Specifications
- Motor: 3 HP/220V/TEFC Capacitor Start Induction with Poly-V Belt Drive
- Motor Speed: 3450 RPM
- Starter Switch: Magnetic
- Rip Capacity: 36"
- Blade Size: 10"
- Vertical Cut Height: 3-1/8”
- Cut Height at 45°: 2-1/8"
- Blade Tilt: 0-45° Left
- Minimum Kerf: 3mm ~1/8" (actual: 0.1875")
- Maximum Kerf (Dado Blade): 13/16"
- Arbor Speed: 4500 RPM
- Arbor Diameter: 5/8"
- Miter Slot: 3/4" to 1" T-slot
- Throat Plate: Zero Clearance Square Die-Cast, w/adjustment
- Fence: Double Rail Cam Action
- Base Size: 18-5/8" L x 19-1/4" W
- Floor to Table Height: 34-3/4"
- Table Size: 27"L x 20" W
- Extension Wing: 27"L x 12" W (x2)
- Throat Plate Size: 14-5/8" L x 4-1/16" W x 1/2" T
- Dust Port Size: 3-7/8" OD
- CFM Requirement: 400 CFM
- Overall Size: 39-3/4" L x 65-5/8" W x 38" H
- Machine Weight: 385 lb.
- Shipping Weight: 482 lb.
- Shipping Dimensions: 29-3/4" L x 46-5/8" W x 42-5/8" H
- Warranty: 2 year
- Power Requirements: 220V-1PH-60HZ
- Amperage (FLA): 15 AMP (220V)
- Plug Included: 6-15
- Circuit Breaker Required: 220V - 25 AMP
- Receptacle Required: 6-15
-
-
All-new for 2021, the Laguna JX|8 QuadTec I is loaded with highly desirable features to make jointing safer and more enjoyable. The JX|8 is available in 2 versions. This version is the 110 Volt 1.75 HP version. JX|8 Quadtec I Standard Features:- Parallelogram Table Adjustments - Table depth adjustments travel along an arc to keep the same distance to the cutterhead through its travel
- Emergency “Knee-Stop” - The new knee stop uses a body-length bar at knee height to shut off the JX jointer. This important safety feature allows the machine operator to stop the machine quickly at any position along the front of the machine while keeping hands on the workpiece
- New Ergonomic Machine Body - The new JX Series machine body has been redesigned with a “toe-kick” to allow the user to position themself closer to the machine tables and to move safer and easier along the length of the machine
- In-feed Support Roller - Infeed tables are now fitted with pull-out support roller to help support longer materials
- QuadTec I Cutterhead - The all-new QuadTec I cuttherhead comes as standard equipment on the new JX-8 QuadTec I jointer. The QuadTec I produces an amazing surface finish on all woods including difficult hardwoods. The QuadTec I uses 4-sided carbide insert knives that are quieter and much more durable compared to straight HSS knives. The 4-sided knives can be rotated for a new cutting edge without the need for a knife setting jig
- Built-In Wheels - No need to purchase a separate mobility kit
- Cast-Iron Tables and Fence
-
Sale!
G1023RLX 10 foot 3 HP 220V Cabinet Left-Tilting Table Saw
This is the one you've been waiting for. Featuring 53 inches of rip capacity, a quick-release bade guard, interchangeable riving knife, encapsulated-blade dust extraction, and a highly efficient serpentine belt/pulley system that runs much quieter and smoother than its predecessor. This left-tilting table saw includes the tremendously popular Shop Fox Classic fence and heavy-duty extension table. Best of all, everything is included for one low price, making this one of the greatest package deals available anywhere. It's CSA certified, meeting CSA C22. 2 #71.2-08 and UL 987 standards.
Construction
Precision-ground and heat treated solid cast iron table, cast iron trunnions and arbor assembly, all sealed ball bearings, one piece steel cabinet type stand and powder coated paint. Poly-V serpentine belt system transfers power more efficiently and with less noise than standard V-belts. Blade encapsulated below table for superior dust collection.
Riving Knife
Riving knife moves up, down and tilts with blade to ensure safe operation and prevent kickback. The quick release splitter guard makes it fast and easy to switch between riving knife and blade guard.
-
Out of stock
Peerless performance. Sporting standard black HEPA filtration the P|Flux series is filled with innovative details such as: • LED shows when drum is full • LED shows when filter needs cleaning • Swing-away doors sports acoustic foam on the inside to lower noise level. -
The P|Flux series gets a host of exciting new upgrades including an auto-cleaning feature standard on all models in this line. The auto-clean conveniently activates every 10 minutes, or you can simply activate from the sleek redesigned remote. Overfilling the drum is a thing of the past, thanks to the super-sized 46 gallon octagonal drum (P|Flux 2 and 3), and a bright LED light illuminating the drum on all P|Flux models. Plus, LED and audio warning lets you know when the drum is full – features that are now standard in this line.
Specs:
Motor Specs: 1.5 HP Electrical Specs: 110V/220V / 60Hz / 1PH / 3450 RPM Running AMP: (with 6” inlet) 18.8A at 110V; 9.4A at 220V Air Volume: 900CFM (cubic feet per minute) Max. static pressure: 10.1Inches of water Fan size: 13.5” Inlet: One 6” or two 4” ports Switch: High frequency remote control switch Collection capacity: 25 gallon Octagon drum Packing Size: (L x W x H) 45” x 28.3” x 47” (114.5 x 72 x 119.5 cm) Machine weight: 232 lbs. (105 kgs) Shipping weight: 287 lbs. (130 kgs) Filter Media: filtering area: 48.4 sq./ft. (4.5 m2) Cartridge Filter: HEPA 15.74” x 19.68” (40 x 50cm) x 1pc -
The 18|BX Bandsaw follows in the traditions of high-performance and reliability established by the widely-used Laguna Tools 14|12 and 14|bx models. The 18|bx is built around a 3HP, 220V motor and 145” (368 cm) blade for consistent results, cut-after-cut, regardless of material. -
he First feature that will catch your attention is undoubtedly the ergonomic angled control panel made from anodized aluminum. The blue hue of the DRO along with the beautiful knurled control knob fitted with a rubber grip signals this is no ordinary lathe.The bed is made from steel which allows the cast iron headstock to travel incredibly smoothly. Steel is the preferred material due to its well known longevity & strength.Electronic variable speed is obtained via a VFD that converts 1 phase input to 3 phase output, so even at low settings you will get an incredible amount of torque. The DRO gives you an accurate RPM readout at all times any fine adjustments are made electronically. Changing from high to low settings is made easy by using the quick release handle.The headstock & tailstock lock handles are situated on the back to eliminate any interruptions to your work flow. Ergonomically designed handles use a cam lock resulting in a firm feel with no deflection. -
MTSF3362203-0130-52, Laguna Tools F3 Fusion 52in Rip Capacity Tablesaw The new Laguna F2 and F3 Table Saws are unlike any saw on the market. Having the same quality demands earned through the original fusion table saw, the new fusion line will not only impress but exceed the expectations you have come to expect from Laguna. With a completely redesigned trunnion and arbor controls that focuses on buttery smooth controls and longevity of the saw, we are sure this is the saw that will give you the perfect rip cut for many many years. 2 New Features Now Standard On F2 & F3 Fusions:- DRO For The Tilt Angle Of Blade
- Double Window With Hairline For Hi/Low Fence
- 52" Rip Capacity
- Industrial 14 Gauge Cabinet
- 3HP TEFC Motor
- 220V, Single-Phase, 60Hz Power Requirement
- Accessory Tables (Outfeed & Rip)
- Industrial Fence Rail
- Industrial Fusion Fence
- Premium Electrical & Hardware Components
- Premium Miter Gauge
- Cast Iron Fusion Trunnions
- Cabinet Mounted Arbor
- Cast Iron Table & Wings
- European Hi-Lo Fence
- Premium Zero Clearance Throat Plate
- Fusion Hi-Lo Dust Collection
- Magnetic Contactor Switch
- Quick-Release Blade Guard and Spreader
- Riving Knife Included
- Push Stick Included
- Miter Gauge Included
- Blade Changing Tool Included
- Integrated Tool Storage
- 10 x 60T Carbide-Tipped Blade Included
- Premium Arbor and Motor Bearing
- Outfeed Table - Coming standard with the Fusion F3, the outfeed table features dual miter slots and 2 supporting legs
- Cabinet Mounted Trunion - Adjusting the table to line up the miter guage has never been easier
- Industrial Grade Cabinet - The Fusion 3 features a heavy-duty cabinet for added rigidity and strength
- Industrial Fence and Rails - The fence glides effortlessly on the industrial strength steel fence rails
- Dust Port Size: 4 in.
- Blade Guard Dust Port Size: 1.5 in.
- Table Saw Type: Cabinet
- 220V, Single-Phase, 60Hz Power Requirement
- Maximum Blade Diameter: 10 in.
- Cutting Material: Wood
- Arbor Size: 0.62 in.
- Arbor Speed: 4500RPM
- Maximum Width Of Dado: 0.75 in.
- Blade Tilt Direction: Left
- Max Blade Tilt: 45°
- Maximum Depth Of Cut At 90°: 3.12 in.
- Maximum Depth Of Cut At 45°: 2.12 in.
- Max Rip Right Of Blade w/ Included Fence & Rails: 37 in.
- Max Rip Left Of Blade w/ Included Fence & Rails: 19.68 in
- Included Blade Information: 10" x 60T
- Riving Knife/Spreader Thickness: 0.09 in.
- Required Blade Body Thickness: > 3.0mm
- Required Blade Kerf Thickness: < 2.0mm
- Floor To Table Height: 34.9 in.
- Table Size With Extension Wings Width: 76.91 in.
- Table Size With Extension Wings Depth: 26.9 in.
- Distance - Front of Table To Center Of Blade: 13.46 in.
- Distance - Front of Table To Blade At Maximum Cut: 8.66 in.
- Main Table Size Thickness: 1.49 in
- Fence Type: Camlock T-Shape With Aluminum With European Hi-Lo Face
- Fence Size Length: 33.46 in.
- Fence Size Width: 15.94 in.
- Fence Size Height: 3.03 in
- Fence Rail Type: Aluminum Extrusion/Angle Steel
- Fence Rail Length: 67.87 in.
- Fence Rail Width: 3 in.
- Fence Rail Height: 2 in.
- Weight (Net): 405 lbs.
- Overall Width (Side-To-Side): 84.94 in.
- Overall Depth (Front-To-Back): 56.1 in.
- Overall Height: 42.91 in.
- Footprint Width: 48 in
- Footprint Length: 42.51 in.
- Space Required For Full Range Of Movement Width (Side-To-Side): 84.94 in.
- Space Required For Full Range Of Movement Depth (Front-To-Back): 56.1 in.
- Table: Precision-Ground Cast Iron
- Wings: Precision-Ground Cast Iron
- Cabinet: 14 Gauge Steel
- Trunnions: Cast Iron
- Body Assembly: 14 Gauge Steel
- Fence Assembly: Steel Body
- Rails: Industrial Steel
- Miter Gauge Construction: Cast Iron With Steel Bar, Alu Fence
- Guard: Steel And Clear Plastic
- Body/Cabinet Paint Type/Finish: Powder Coated
- Arbor Bearings: Sealed & Permanently Lubricated
-
The First feature that will catch your attention is undoubtedly the ergonomic angled control panel made from anodized aluminum. The blue hue of the DRO along with the beautiful knurled control knob fitted with a rubber grip signals this is no ordinary lathe.The bed is made from steel which allows the cast iron headstock to travel incredibly smoothly. Steel is the preferred material due to its well known longevity & strength.Electronic variable speed is obtained via a VFD that converts 1 phase input to 3 phase output, so even at low settings you will get an incredible amount of torque. The DRO gives you an accurate RPM readout at all times any fine adjustments are made electronically. Changing from high to low settings is made easy by using the quick release handle.The headstock & tailstock lock handles are situated on the back to eliminate any interruptions to your work flow. Ergonomically designed handles use a cam lock resulting in a firm feel with no deflection.
-
The Laguna JX|8 ShearTec II is loaded with great features to make jointing safer and more enjoyable. It includes parallelogram table adjustments that travel along an arc to keep the same distance to the cutterhead. An emergency knee stop that uses a body-length bar at knee height to shut off the jointer allows the machine operator to stop the machine quickly at any position along the front of the machine, while keeping hands on the workpiece. The new JX Series machine body has been redesigned with a toe kick to allow the user to be positioned closer to the machine tables and move safer and easier along the length of the machine. Infeed tables are fitted with a pullout support roller to help support longer materials. The ShearTec II is a 6-row carbide insert cutterhead that produces a shear cut for superior surface finish on all woods, including challenging hardwoods. The ShearTec II knives and fasteners have a T-step design to maximize clamping force on the knives, preventing knife cracking and chatter. The ShearTec II cutterhead has deep grooves that make the cutterhead very quiet and improve shaving ejection.Specifications
- Motor: 220V, 3 HP, 1 phase, 60 HZ, 12 amp
- CSA: Yes
- Bed Size: 8" x 72"
- Infeed Table Pullout Extension: 8"
- Rabbeting Capacity: 1/2"
- Fence Size: 38" x 4-3/4" cast-iron
- Fence Tilt: 45°/90°
- Max. Depth of Cut: 1/8"
- Table Height from Floor: 31"
- Safety Bar Shutoff: Yes
- Wheels Built-In: Yes
- Dust Port Diameter: 4"
- Number of Knives: 54 four-sided carbide knife inserts
- Cutterhead RPM: 5,500
- Cutterhead Diameter: 3-1/8"
- Bed Adjustment: parallelogram
- Overall Dimensions: 75-1/2" x 26-1/2"
- Shipping Dimensions: 76" x 25" x 41"
- Net Weight: 380 lbs.
- Shipping Weight: 495 lbs.
-
A VFD (Variable Frequency Drive) with digital readout provides infinitely variable blade speeds between 150 and 3000 FPM, making this saw great for cutting wood and metal alike! Just turn the speed control dial to set the perfect cutting speed for each type of material you're cutting. Besides providing the variable-speed control, the VFD also allows this machine to take full advantage of the high-torque/low-speed characteristics of a 3-phase motor?while only requiring a single-phase power supply. The vertical cutting configuration and massive cast-iron table also makes it easy to feed intricate, curved cuts. All in all, the strong versatility of this 18" Vertical Wood/Metal Bandsaw makes it an ideal choice when shop space is limited and the range of profect types is diverse! Specifications- Motor: 1-1/2 HP, 220V, 3-phase
- Power supply requirement: 220V, single-phase, 15A
- Max. cutting height: 12"
- Throat capacity: 17-1/2"
- Blade length: 133"
- Blade size range: 1/8"?1-1/4"
- Blade speed: variable, 150-3000 FPM
- Table tilt: 45° right, 5°left
- Floor to table height: 37-1/4"
- Table size: 18" x 24"
- Left and right table tilting control
- Upper and lower blade guides
- Precision-ground cast-iron table
- Quick-release blade tension
- Steel guide blocks
- Two dust ports
- Wheel brush on lower wheel
- Frequency drive provides variable speed control
- Fully balanced cast-iron wheels with rubber tires
- Rack-and-pinion adjustment on upper blade guide support
- Blade tension scale with magnified cursor
- Twin drive belts
- Includes rip fence and miter gauge
- Rip fence comes with right and left reading indicators, T-slots for quick change attachments, dead lift quick release, ball bearing slide, solid lever lock
- Overall size: 40"W x 76"H x 31"D
- Approximate shipping weight: 327 lbs.
-
The P|Flux series gets a host of exciting new upgrades including an auto-cleaning feature standard on all models in this line. The auto-clean conveniently activates every 10 minutes, or you can simply activate from the sleek redesigned remote. Overfilling the drum is a thing of the past, thanks to the super-sized 46 gallon octagonal drum (P|Flux 2 and 3), and a bright LED light illuminating the drum on all P|Flux models. Plus, LED and audio warning lets you know when the drum is full – features that are now standard in this line.
Specs:
Motor Specs: 2 HP
Electrical Specs: 220V / 60Hz / 1PH / 3450 RPM
Running AMP: (6” inlet) 14A at 220V
Air Volume: 1166 CFM (cubic feet per minute)
Max. static pressure: 9.3 Inches of water
Fan size: 14.5”
Inlet: Ø6” (Ø 8” BY Ø 6” PORT) OR (Ø 8” BY Ø 4” X 2 PORTS)
Switch: High frequency remote control switch
Collection capacity: 46-gallon Octagon drum
Packing Size: (L x W x H)
50” x 31.5” x 50.6”
(127 x 80 x 128.5 cm)
Machine weight: 362 lbs. (164 kgs)
Shipping weight: 430 lbs. (195 kgs)
Filter Media: filtering area: 102 sq/ft (9.5 M2)
Cartridge Filter: Black HEPA 15.74” x 35.43” (Ø40 x 90cm) x 1pc