-
20” steel extension fits in two positions for increased spindle or turning capacity. Extension for Revo 15|24 lathe -
Sale!
Introducing New Auto Dust Sensing Technology- The AFS1000C, when in auto mode, adjusts fan speed based on air quality
- Auto-cleaning technology enables AFS unit to run only when dust is detected
- Molded footing allows air flow under unit for when on a work bench.
- Fan speed can be set in auto mode, or adjusted, from the control panel or the RF remote
- Six speeds allow for precise adjustment
-
- Motor: 1/2 HP, 110 V, 7.5 amp
- RPM: 1,725
- Oscillation Stroke: 15/16”
- Oscillations/Minute: 29
- Table Size: 14 1/2” x 14 1/2”
- Table Tilt: 45º
- Table Height: 39”
- Spindles: 1/4”, 1/2”, 5/8”, 1 1/2”, 2”
- Inserts: 4
- Dust-Port: 2”
- Footprint: 25” x 25"
- Weight (Net/Ship): 66/73 lbs
-
The best looking single stage dust collector to hit the market in years. Sleek design and power to match. No more fumbling with a steel band to mount your lower bag, the b|flux comes with a patented Snap-Band that makes changing the bag a breeze. Unlike most 1HP units the b|flux feels solid & has a low dB rating. The horizontal dust chute provides optimum airflow & can swivel 180° to make the 4″ outlet face downwards. -
Laguna’s DB12|6 Sander is a multi-purpose machine that gives you two sanding surfaces. Motor: 1.5 HP, 110 V, 1,725 RPM, 12 amp Belt Size: 6” x 48”, Belt Speed: 1,720 RPM Belt Table: 16” x 9” Belt Table Tilt: 45º down, 25º up Platen Tilt: 0º – 90º, Disc Size: 12” Disc-Table Tilt: 45º down, 25º up Disc-Table Size: 16” x 10” Dust-Port: 2” x 2” Dimensions: 35” x 18” x 55” Weight (Net/Ship): 165/180 lbs6"X48" BELT / 12" DISC SANDER W/ 1.5HP MOTOR N.W: 75KGS / G.W: 81KGS / CUFT: 11.6 Length: 81cm X Width: 77cm X Height: 53cm
-
Laguna’s DB12|6 Sander is a multi-purpose machine that gives you two sanding surfaces. Motor: 1.5 HP, 110 V, 1,725 RPM, 12 amp Belt Size: 6” x 48”, Belt Speed: 1,720 RPM Belt Table: 16” x 9” Belt Table Tilt: 45º down, 25º up Platen Tilt: 0º – 90º, Disc Size: 12” Disc-Table Tilt: 45º down, 25º up Disc-Table Size: 16” x 10” Dust-Port: 2” x 2” Dimensions: 35” x 18” x 55” Weight (Net/Ship): 165/180 lbs6"X48" BELT / 12" DISC SANDER W/ 1.5HP MOTOR N.W: 75KGS / G.W: 81KGS / CUFT: 11.6 Length: 81cm X Width: 77cm X Height: 53cm
-
Out of stock
- “Auto Switch” where the machine can be directly connected, plugged into the dust collector, when the machine is turned ON/OFF the dust collector will be turned ON/OFF automatically. (DAS Units ONLY)
- Convenient “Snap Ring” on a lower collection bag.
- Heavy-duty motor design with a continuous duty rating for industrial applications.
- Equipped with the totally enclosed, fan-cooled, permanently lubricated motor.
- Designed for industrial applications with a continuous duty rating.
- Heavy-duty base, mounted on four swivel casters, allowing total mobility and stability.
- Safety switch with key. The unit cannot be started when key is removed from the switch. Precision “SPARK FREE “spin-balanced impeller for smooth operation and minimal noise.
- Precision “SPARK FREE” spin-balanced impeller for smooth operation and minimal noise.
- Reusable clear plastic collector bag for improved dust collection efficiency. Equipped with 2-micron filter bag. (Not included on the “CF” canister filter model). The intake screen prevents larger pieces from jamming in the impeller.
- Heavy-duty collection bag made from extra-thick, transparent, recyclable plastic. ETL( Electrical Testing Laboratories) certified.
-
-
- Motor: 1 HP DC Permanent Magnet Motor
- Controller: Pulse Width Modulation (PWM)
- Electrical Requirements: 110V-1PH-60HZ
- Recommended Breaker Size: 110V - 15 AMP
- Speed Range High 650 - 3500 RPM
- Speed Range Mid 325 - 1750 RPM
- Speed Range Low 50 - 525 RPM
- Distance Between Centers 15.5”
- Swing Over Bed 12-1/2”
- Swing Over Banjo 9-1/2”
- Max. Outboard Swing 16”
- Spindle Bore 3/8”
- Spindle Taper MT2
- Spindle Thread 1”x 8 TPI (both ends)
- Front Bearing 6006LLU
- Rear Bearing 6005LLU
- Indexing 24 positions w/ Lock
- Drive belt Poly-V Belt 6 Grooves
- Tail stock quill travel 2-1/2”
- Tail stock taper MT2
- Bed Length 29.4”
- Tool Rest Length 6”
- Tool Rest Post Dia. 1”
- Faceplate Dia. 3”
- Certification CSA C/US 256540
- Floor to bed height 6.7” no pads
- Floor to Spindle Center 13” no pads
- Overall Size L29.4” W8.9” H17.4”
- Shipping Dimensions L35.8” W14.6” H20.5”
- Net Weight 118 LBS
- Shipping Weight 125 LBS
-
-
Sale!
G0555LX 14" 1 HP Deluxe Bandsaw
An upgraded version of a Grizzly classic.
Another great addition to our G0555 line of 14" bandsaws, the G0555LX runs quietly and cuts accurately with plenty of power to do crosscuts, scrolls, and resaw thick hardwoods. The bandsaw operates with minimal vibration for precision cutting thanks to the cast-iron frame and heavy-duty stand. The precision-ground cast-iron table tilts 45° right and 15° to the left. The sturdy T-shaped fence is designed for easy attachment and removal from the rails and has a magnified cursor scale for fast, accurate adjustments. For a full range replacement and resaw blades for the G0555LX, shop here. Ball-bearing rollers on the upper and lower blade guide assemblies are easy to adjust. Made from high-strength aluminum, three styles of premium blade guide kits add flexibility and accuracy to your 14" bandsaw. These kits are available in three styles: ball bearing, ceramic, and scrolling. The T25555 Riser Block Kit is available to increase the capacity of this bandsaw from 6" to 12". Prewired for 110V, the G0555LX can plug into a standard 110V wall receptacle. This machine can be converted to operate on a 220V power supply by referring to the voltage conversion instructions in the manual. The easy-to-read G0555LX manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The Grizzly Customer Service and Technical Support Teams are U.S. based. Like all Grizzly bandsaws, the G0555LX comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. -
MTSF132110150-0130, LAGUNA FUSION F1 TABLESAW
The new Laguna Fusion Table Saws are unlike any saw on the market. Having the same quality demands earned through the original fusion table saw, the new fusion line will not only impress but exceed the expectations you have come to expect from Laguna. With a completely redesigned trunnion and arbor controls that focuses on buttery smooth controls and longevity of the saw, we are sure this is the saw that will give you the perfect rip cut for many many years. Features:- 1.5HP TEFC Motor
- 110V, Single-Phase, 60Hz Power Requirement
- Polished Cast Iron Table
- Included Tools & Integrated Tool Storage
- Included 10 x 60T Carbide-Tipped Blade
- Fusion Hi-Lo Dust Collection
- Fusion Over-Under Trunnions
- Reset Switch
- Quick-Release Blade Guard and Spreader
- Riving Knife Included
- Push Stick Included
- Mitre Gauge Included
- Premium Handles
- Premium Arbor and Motor Bearings
- Power Requirements:110V-1PH-60HZ*
- Amperage (FLA): 12 AMP
- Motor Power: 1.5 HP
- Motor Speed: 3450 RPM
- Starter Switch: Magnetic
- Plug Included: 5-15
- Circuit Breaker Req.: 110V - 20 AMP
- Receptacle Req.: 5-15
- Certification: CSA C/US 175370
- Net Weight: 200 lbs
- Shipping Weight: 280 lbs
- Shipping Dimensions: L30" W40" H30"
- Overall Size: L39-3/4" W59-5/8" H38"
- Rip Capacity: 30"
- Cutting Material: Wood
- Blade Size: 10"
- Vertical Cut Height: 3 1/8”
- 45° Cut Height: 2 1/8"
- Tilt: 0-45° Left
- Min. Kerf: 3mm ~1/8" (actual: 0.1875")
- Max. Kerf (Dado Blade): 13/16"
- Arbor Speed: 4000 RPM
- Arbor Diameter: 5/8"
- Mitre Slot: 3/4" to 1" T
- Throat Plate: Zero Clearance Square Die- Cast, w/ adjustment
- Fence: Single Rail Cam Action
- Overall Size: L39-3/4" W59-5/8" H38"
- w/ 52" Extension: +16" to W in Overall Size
- Base: L19" W20"
- Floor to To Table: H34-3/4"
- Table: L27" W20"
- Extension Wing: L27" W12" (x2)
- Throat Plate: L14-5/8" W4-1/16" th1/2"
- Dust Collection:
- Dust Port Outer Diameter: 3-7/8"
- CFM Requirement: 350 CFM
- Dust Port Outer Diameter:3-7/8"
- Table: Cast Iron
- Table Wing: Sheet Steel
- Cabinet : Sheet Steel
- Throat Plate: Die Cast Iron
- Arbor Wheels: Die Cast
- Fence: Aluminum Rail, Steel Body
- Upper Trunnion : Cast Aluminum Alloy
- Lower Trunnion: Cast Aluminum Alloy
- Features & Comparison:
- Industrial Use: NO
- Enclosed Cabinet: NO
- Integrated Mobility: NO
- Quick Release Guards: YES
- Quick Blade Change: YES
- Integrated Tool Holder: YES
- TEFC Motor: YES
- 110V Power: YES
- Iron Upper Trunnion:NO
- Dado Throat Plate: PTSF236110175-001
- Thin Kerf Riving Knife: PTSF132110150-0130-000
- Right of wing table: NO
- Outfeed Table Attachment: NO
-
-
Laguna’s 6|89T Edge Sander is a horizontal/vertical sanding machine with swing function of the sanding belt. It features a 10” x 12” end table with dust shroud, a footprint of only 51” x 20” x 45”, and a belt speed of as high as 3,900 RPM.
Motor: 1.5 HP, 110 V, 18 amp
RPM: 3,450, Belt Size: 6” x 89”
Front Table: 10” x 30”
Table Heights: 38” min. – 41” max.
Platen Tilt: 0º – 90º
Platen Size: 7” x 33” (graphite)
End Table: 10” x 12”
Belt Speed: 3,900 RPM
Oscillation: 1/2”, Dust-Port: 4”
Dimensions: 51” x 20” x 45”
Weight (Net/Ship): 258/273 lbs
