- Dimensions: 9.25 x 11.75 x 10.1 inches
- THIS MODEL IS DESIGNED FOR USE WITH PC 690/890, BOSCH 1617/1618, DEWALT 610/618/616, CRAFTSMAN 1754/17540/28190
-
Out of stock
The new Rout-R-Lift II from JessEm Tool brings affordable precision to the entry-level router lift market. -
Out of stock
The JessEms router table stand is designed and manufactured in Canada. From its solid 6063 aluminum extruded legs and braces to its stainless steel hardware, this stand will not disappoint. The unique stand legs are extruded with 6063 aluminum and were specifically designed for a square cabinet to fit with no obstructions. In addition, the stand legs have t-slots for mounting various accessories you may have. The braces, also extruded, are designed with a cabinet in mind and will sit flush with the bottom of your cabinet. -
Out of stock
- Includes JessEm Mast-R-Lift Excel II for most cylinder router motors
- 32" x 24" phenolic table with aluminum extruded miter track & T-track
- Extruded aluminum router table fence with fully adjustable fence faces
- Rigid, heavy-duty steel stand with upper and lower stretchers
- Optional Digital Readout Attachment and Pow-R-Tek Remote Power Switch not included
-
Out of stock
- Create 1/4-Inch, 3/8-Inch and 1/2-Inch (3/8-Inch drill bushings and drill bit included) dowel holes on the end or face of your work piece
- Locations of dowels can be pre-set in 1/8-Inch increment
- Built in alignment slot
- Included are (5) 3/8-Inch drill guides, 3/8-Inch drill bit, 3/8-Inch stop collar, and 3/8-Inch indexing pin
- Maximum edge to center distance for dowel holes is 3-1/2-Inch
-
Out of stock
Finally a lift is available to fit your Plunge Based Router. JessEm is proud to introduce to you our Rout-R-Lift Prestige. The Prestige allows the user to mount the base of their plunge based router motor to the carriage. Made from the same high quality products as our Mast-R-Lift II and Excel II, the Prestige offer customers another list of options for their wood shops.- Rout-R-Lift PrestigeAll screws to mount each router mentioned to the base plate 3 - Insert Rings (1-3/8", 2" and 2-1/2") 1 - Insert Wrench 1 - Lift Adjustment Handle 10 - Stainless Steel Set Screws with Blue Nylok Patch 4 - Mounting Screws
-
Out of stock Finally a lift is available to fit your Plunge Based Router. JessEm is proud to introduce to you our Rout-R-Lift Prestige. The Prestige allows the user to mount the base of their plunge based router motor to the carriage. Made from the same high quality products as our Mast-R-Lift II and Excel II, the Prestige offer customers another list of options for their wood shops.
- Rout-R-Lift PrestigeAll screws to mount each router mentioned to the base plate 3 - Insert Rings (1-3/8", 2" and 2-1/2") 1 - Insert Wrench 1 - Lift Adjustment Handle 10 - Stainless Steel Set Screws with Blue Nylok Patch 4 - Mounting Screws
-
Out of stock
- Includes Jessem prestige router lift 02332 IMPERIAL pre drilled
- Predrilled for Festool routers OF 1010 & OF 1400 only
- 32" x 24" phenolic table with aluminum extruded miter track
- Mast-R-Fence II router table fence with fully adjustable fence faces
- Fence position maintained by side mounted adjustable fence tracks
- Rigid, heavy-duty steel stand with upper and lower stretchers
-
Out of stock
- Includes Jessem prestige router lift 02320 Metric pre drilled
- Predrilled for Festool routers OF 1010 & OF 1400 only
- 32" x 24" phenolic table with aluminum extruded miter track
- Mast-R-Fence II router table fence with fully adjustable fence faces
- Fence position maintained by side mounted adjustable fence tracks
- Rigid, heavy-duty steel stand with upper and lower stretchers
-
Out of stock
-
Out of stock
Marking Gauges have been around for centuries but nothing has been designed to dial in your exact measurements, until now. Introducing the new JessEm Wood Sabre Marking Gauge. Once again JessEm has taken a basic tool and made it innovative by enabling a marking gauge to be preset to any pre-determined position.- Woodworking marking gauge
- Possibility to preset position to a pre-determined position
- micro adjustment availables
- High quality product.
- Made in Canada
-
Out of stock
Easily attach this JessEm heavy gauge steel router table stand to any JessEm router table top or a router table top of your own design for a complete and incredibly strong router table. Assembly is simple, and it includes riveted steel nuts to accept the bolts needed for assembly. 35" high without a table top.- Table stand for all kinds of router table systems
- Simply bolt pre-installed steel nuts onto table
- Made from heavy-duty steel tube legs with flanged steel cross braces
- Non-slip adjustable leg levelers hold work pieces steady
- 35-by-26-by-22-inches
-
Out of stock
This kit is designed to mount your Clear-Cut Stock Guides to 1/2" to 3/4" thick stock which most shop made fences are made of. If you have a thicker fence that's not a problem, just substitute the 1/4"-20 X 2" hex head cap screws that come with the kit with longer screws available at most hardware and building center stores to accommodate the thickness of your fence.