Shop – Page 86 – CT Power Tools

BAILEIGH 1017650 AIR FILTRATION SYSTEM – AFS-1600

$1,204.99

If you’re a medium to large woodworking shop or cabinet makerr, then the AFS-1600 air filtration system is perfect for you. It features three speeds and a heavy-duty 1/2 HP motor produces a maximum 1575 cfm unrestricted airflow and provides 1370 cfm of filtered air. This will clean the air in a 45’x 45’ shop every 10 minutes. This woodshop air filtration system will remove 99-percent of dust particles as small as five microns and 91-percent of particles as small as one micron in size. And the best part is that it is 110 volt and only takes 6 amps of power to run. For ease and convenience, the AFS-1600 air purifier for wood shops, like all Baileigh air filtration systems, comes standard with a radio frequency (RF) remote control allows you to operate the Air-Tech HP from anywhere in the shop, even from an adjacent room. The convenient RF remote is equipped with three speeds and a timer function that allows you to set a timer for 2, 4, 6, and 8 hour increments.

Read Less

Item Number	AFS-1600
Filter Type	99% 5 Micron – 91% 1 Micron
Number of Filters	2
Filter Size	20" x 24"
Shipping Weight	160lbs
CFM	1,575 Max – 1370 Filtered Air
Remote Start	Radio Frequency (RF) With Timer Included
Speeds	3
Power	110V
Length	44"
Width	24"
Height	20"
Horse Power	1/2
Noise Level ( @ 3 meters)	66 Decibles
Shipping Dimensions (Inches)	48x45x27

Details

Tormek Sharpening System Drilling System TBD806 T8 Sharpener

$1,206.00

The Tormek T-8 is our top of the line water-cooled sharpening system, and is – by far – the best sharpening system one can buy. If you use tools that need a finely honed, razor-sharp edge, this machine will give you a lifetime of excellent service, and ensure your tools have an edge that allows you to effortlessly work your magic. It sharpens all manner of tools – knives, scissors, wood chisels, plane irons, spoke shaves, carving tools, lathe turning tools, Axes, and much more. If it has an edge, the Tormek T-8 will sharpen it. The Tormek Grindstone is constructed so that with the Stone Grader it can be treated to change its property from 220 grit to 1, 000 grit. This has obvious advantages. You can make both the first fast grinding and the sharpening on the same grindstone and the same grinding machine and with the same jig setting. After grinding, the 8-5/8" diameter x 1-7/32" genuine leather honing wheel gently removes the burr and hones the edge to razor sharpness. The T-8 System includes the Advanced Square Edge Jig, Truing and Dressing Tool, Stone Grader, Angle Master, Honing Compound, Handbook and Instructional DVD and comes with a seven-year factory . Also included is Tormek’s patented Drill Bit Attachment which allows you to sharpen your drill bits with the highest precision. The beneficial 4-facet point prevents drill from “walking” that is normal with standard round point bits. The high precision sharpening – both cutting edges are sharpened to an exact equal length and symmetrically – make the drill work efficiently and the life of the drill bit is considerably prolonged. The optimal point and clearance angles can be set according to each drilling requirement, which depends upon the drill size and material. Completely restore worn drills as well as broken drills to a perfect shape. Stainless steel shaft and hardware

Add to cart Details
Out of stock

Baileigh 1002692 3HP DUST COLLECTOR MODEL DC-2300B 30 MICRON

$1,209.00
This bag-style dust collector system is strong enough to handle multiple machines at once, such as planers, sanders, and table saws. Get 2,300 CFMof suction 8 hours a day for a low price.
- 3 hp motor runs on 220-volt single-phase power.
- This woodworking dust collector produces a robust 2,300 CFM. You can feel the machine pulling air towards it!
- For less than $200 more, the DC-2300B is well worth stepping up from our DC-1650B dust extractor if you need more force.
- Integrated all-steel ducting provides smooth airflow. No ridges to cause drag and dust buildup.
- 30 micron filters on the upper and lower bags remove particles from the air to protect your lungs.
- To keep your shop pristine and remove even more dust, you can add an optional 1-micron filter canister to this bag dust collection system.
- 2 large bags give you more volume, so you don’t have to empty them as frequently.
- 3 dust ports (8” x 4” in size) let you hook up several hoses and machines at the same time.
- 4 locking swivel casters, along with conveniently located handles, allow you to move the machine without difficulty.
- It takes just an hour to an hour and a half to set up this dust extraction system.
- Covered by a 1-year parts warranty.
- We provide lifetime technical support by phone. Call up our team of experienced reps whenever you need machine help.
Recommended for: full-time, single-shift shops, such as professional cabinetry shops.
Details
Out of stock

Baileigh Industrial Straight Hand Brake- HBR-4820

$1,219.00
This industrial sheet metal bender can bend light-gauge materials without the awkward length of larger metal brakes.
- This straight brake has a maximum capacity of 20 gauge mild steel and 18 gauge aluminum.
- 48” (4 feet) long and can bend at full capacity all the way across.
- You can adjust the clamping pressure for more delicate work.
- Bend angle of up to 120°.
- Right and left cam lever arm precisely clamps the material.
- Fully-welded steel plate construction, with support trusses on the top and bottom, maintains rigidity to deliver accurate results for years.
Details
Out of stock

JET JWDS -1020 BENCHTOP DRUM SANDER, 115V, 1 PH, 1 HP (723510

$1,239.95
The compact JWDS-1020 benchtop sander from JET packs a powerful 1HP motor that will sand boards up to 3" thick and 20" wide. The innovative patented dust hood ensures dust is funneled to the 4 inch dust port that easily connects to a Dust Collector. Adjusting the table back to parallel is convenient with just the turn of a dial. The self-cooling extruded aluminum sanding drum protects the sanding surface from heat damage, preventing waste.
FEATURE

Maximum Board Width (In.)20

Number of Sanding Drums1

Style (Type)Benchtop

Drum Diameter (In.)5

Maximum Board Thickness (In.)3

Minimum Board Thickness (In.)1/32

Weight (Lbs.)73

Motor Power (HP)1

Dust Port Outside Diameter (In.)4
Details
Tormek T-8 Drill Bit Sharpener Kit Tormek T-8 Original DBS-22 Drill Bit Sharper

$1,250.00

This bundle combines the Tormek T-8 water-cooled sharpening system with the DBS-22 Drill Bit Sharpening Attachment.

This Tormek T-8 Drill Bit Sharpener Kit includes the DBS-22 Drill Bit Sharpening Attachment to sharpen your drill bits (3-22 mm) with the highest precision. The DBS-22 Drill Bit Attachment allows for complete control when sharpening drill bits eliminating the risk of overheating the steel. You can completely restore worn as well as broken drill bits to a perfect shape.

The Tormek T-8 is Tormek’s most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel

Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, TT-50 Truing Tool, WM-200 Angle Master, SP-650 Stone Grader, DBS-22 Drill Bit Sharpening Attachment

Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine.

Add to cart Details
WILTON Mechanics Pro Vise 10” Jaw Width, 12″ Jaw Opening, 360° Swivel 28814

$1,266.99

WILTON Mechanics Pro Vises are designed and built using premium materials for unbeatable durability. Featuring an enclosed spindle, precision slide bar, innovative thrust bearing, 360 ̊ swivel, plus WILTON’s lifetime warranty—you’ll never want another vise, unless it’s a WILTON.

Add to cart Details
Out of stock

US Stove Company Pellet Stove 40k BTU, Model# 5040 45lb

$1,279.95

Proven design and technology come together in this beautiful pellet stove. Designed for moderately sized homes and condos, the 5040 comes with high end features such as remote thermostat hookups and simple to use control all packed into a neat little package that is perfect for smaller spaces. The digital control board has 4 heat settings and offers on/off or ultra low burn settings to give you up to 40 hours of burn time with the 45 lb hopper. This is a classic stove design that is worthy of most any space in your home. Pellet heaters work by using a software driven control board to precisely deliver a pre-determined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home.

Details
Out of stock

SHOP FOX M1013 5-Inch by 6-Inch Metal Bandsaw

$1,295.00
Shop Fox M1013 Metal Cutting Bandsaw

5 inch x 6 inch

A bandsaw is a must for any metal shop, and with three speeds, an automatic shut off, and ball bearing blade guides, the Shop Fox M1013 comes equipped with many important performance features. One of these features providing great versatility is the swiveling headstock so there is no fussing with establishing the cut angle at the vise. Just set the workpiece length, and swivel the headstock to an angle between -45 to +60-degrees and make the cut.
Overall height: horizontal 42-1/2 inches; vertical 54-3/4 inches

Footprint: 26-1/2 by 20-1/2 inches

Blade size: 64-1/2 by 1/2 inch

Blade speeds: 80, 120, 200 FPM
Details
Out of stock

Tormek T-8 Chef’s Kit Tormek T-8 Original Sharpener + KJ-45 Centering Knife Jig

$1,295.00

This bundle combines the Tormek T-8 water-cooled sharpening system with the jigs trusted by chefs around the world.

This Tormek T-8 Chef's Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, and the SVM-00 for small knives. Also included is the SVX-150 for your scissors. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy.

The Tormek T-8 is Tormek’s most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.

Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, TT-50 Truing Tool, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.

Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine.

Details
Makita LS1219LX 12″ Dual-Bevel Sliding Compound Miter Saw with Laser and Stand

$1,295.90
The Makita 12” Dual-Bevel Sliding Compound Miter Saw with Laser and Stand (model LS1219LX) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (6-3/4”) and crown molding (8” nested). It will also make 15” crosscuts at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0° to 48° (left and right).

The saw is powered by a 15 AMP direct drive motor with soft start, a key point of difference. Direct drive enables smoother start-ups and consistent, constant power with no belts to slip or replace. The electric brake provides added convenience. In addition, the electronic speed control maintains constant speed under load for smoother, higher-quality cutting.

Additional features include a high-quality 60T carbide-tipped blade, and a see-through blade guard system for greater visibility of the blade and line-of-cut. The built-in laser indicates the line-of-cut whether the blade is turning or not, and offers micro-adjustments for precise “left-of-blade” or “right-of-blade” cutting. It has dual dust collection ports for improved dust collection capability for use with a bag (included) or vacuum (sold separately). It also has a large-sized aluminum base that improves the stability of cutting stock for more efficient cutting.

Model LS1219LX is a kit and includes a 33.7 lb. compact folding stand with transport wheels and a side handle for easier job site portability.
- Unique 2-Steel Rail Sliding System design offers single slide-glide operation
- Increased capacity for up to 8" crown molding (vertically nested), 6-3/4" baseboard (vertical), and 15" crosscuts at 90°
- Includes a durable compact folding stand with transport wheels and a side handle for easier job site portability; features an aluminum tubular design weighing only 33.7 lbs.
- In-front bevel lock for convenient operation
- Dual dust collection ports provide excellent dust extraction performance
- Material support extensions of the stand extend 100-1/2"; supported up to 500 lbs. for increased cutting efficiency
- Innovative direct drive motor and guard system is engineered for increased vertical cutting capacity (6-3/4")
- Linear ball bearing system engineered to deliver "dead-on" accurate cuts
- Less weight (65 lbs.) and the most compact design in its class for easy jobsite portability
- Powerful 15.0 AMP direct drive motor requires less maintenance and delivers 3,200 RPM
- Large-sized aluminum base improves stability of material for efficient cutting
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- Miters 0-60° left and right; bevels 0-48° left and right
- Positive miter stops at: 0°, 15°, 22.5°, 31.6°, 45°, and 60° left or right
- Electronic speed control maintains constant speed under load for smoother, higher quality cutting
- Integrated upper and lower 5-1/2" tall fence system offers added rigidity for more precise miter and bevel cuts
- Built-in laser clearly indicates line-of-cut whether blade is turning or not; on-off switch and micro-adjustments for precise "left-of-blade" or "right-of-blade" cutting
- Ergonomic rubberized horizontal D-handle design for better fit and added comfort
- Replaceable stainless steel miter scale features large and easy-to-read markings
- Easy-to-read dual bevel scale for more precise adjustments
- See-through blade guard system for greater visibility of blade and line of cut
- Easy blade changes for increased efficiency
- Oversized trigger switch for better fit, added comfort and easier operation
- Easy one-touch slide lock for convenience
- Simple 90º turn-of-the-knob miter angle lock/unlock mechanism
Add to cart Details
Out of stock

Ashley Hearth 1,200 Sq. Ft. Pedestal Wood Stove AW1120E-P

$1,299.00

The Ashley Hearth Products AW1120E-P is a beautiful air tight plate steel wood burning stove with nickel-pewter trim that accents a charcoal black finish. A heavy cast iron door with air washed ceramic glass allows a magnificent view of the burning fire that will enhance any hearth setting. The AW1120E-P wood stove meets the stringent requirements of the EPA “Step 2″ 2020 Certification Guidelines. This wood stove has 68,000 BTUs that can heat up to 1,200 square feet. The Ashley AW1120E-P burns logs up to 18” in length while the pedestal base provides an elegant touch to any room. Here’s how it works: the primary air inlet at the front of the stove ignites the wood upon start up. Once burning, the secondary air inlet at the rear of the firebox feeds air to the top of the stove through three (3) ignition tubes directly above the wood. The result is that you have ignition, or fire, at the bottom and at the top of the wood stove which, in effect, consumes the wood. This is a very efficient method of getting the most energy possible out of the wood that you are burning. Blower sold separately (model CB36 or B36) The AW1120E-P model replaces the previous Vogelzang models TR001, TR001B, TR001WS and APS1100 wood stoves.
default.jobtemplate.hls.m3u8

Details