Shop

“Walnut Board 1/4″ x 6″ x 24″” has been added to your cart. View cart

South Bend SB1111 10″ 3HP 220V TABLE SAW W/EXT RAILS

$3,199.99
SB1111 10" 3HP 220V Table Saw with Extension Rails

A high-quality table saw is the most important investment you'll make as a woodworker.
The high-precision South Bend SB11101 10" 3 HP Table Saw with Extension Rails is solidly built with a higher degree of accuracy, high-end components, and longer-lasting reliability than any other table saw on the market. The rip capacity of the SB1111 with the extension rails is 52" to the right and 18" left of the blade. A digital readout on the fence for width of cut, and two digital readouts on the control panel for blade height and tilt allow you to set up your cuts with absolute precision every time. The 1-1/2" thick, precision-ground cast-iron table mounted on the heavy-duty, one-piece steel cabinet to minimize vibration during operation. Additional features, such as a locking ON/OFF switch for safety, large cast-iron handwheels for easy adjustments, and large anodized handles on the miter gauge and rip fence add a professional touch.
Achieve professional results with this superb South Bend table saw.
The SB1111 is covered by a South Bend 2-year warranty covering parts and factory defects. The SB1111 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your saw. The South Bend Customer Service and Technical Support Teams are U.S. based. Parts are available online and shipped from the South Bend parts warehouse in Springfield, MO. Made in an ISO 9001 factory CSA certified SPECIFICATIONS:
- Motor: 3 HP, 220V, single-phase, 13A
- Rip capacity: 52" right, 18" left of blade
- Max. depth of cut @ 90°: 3-1/8"
- Max. depth of cut @ 45°: 2-1/8"
- Distance from front of table to center of blade: 14-7/8"
- Floor-to-table height: 35-3/4"
- Arbor diameter: 5/8"
- Arbor speed: 4000 RPM
- Max. width of dado: 3/4"
- Dust port size: 4"
- Table size with extensions: 76" W x 65-5/8" D
- Footprint: 22" x 24"
- Overall dimensions: 91-1/2" W x 73" D x 43-1/2" H
- Approximate shipping weight: 742 lbs.
FEATURES:
- Digital readouts for blade height, blade angle and distance of fence to left or right side of blade
- Precision-ground cast-iron table with beveled edge
- Quick-release blade guard and spreader
- Locking power ON/OFF switch with key
- One-piece steel cabinet
- Angled dust chute in cabinet and built-in dust port for efficient dust collection and cleaning
- Large cast-iron handwheels
- Anodized handles on miter gauge and rip fence
- Two 3/4" miter slots in table
- US based customer service and technical support
Add to cart Details
C4 PANEL SAW SAFETY SPEED VERTICAL PANEL SAW

$3,219.00
DESCRIPTION
The C4 model packs all of the features of the full-size saws into a portable 5′ frame. This panel saw can travel to work sites and fit into shops with limited floor space. The C4 is ideal for cutting 4’–8′ sheets of material. Standard Equipment
- 3 ¼ Hp, 15 amp industrial duty saw motor.
- Zinc plated 1 ¾” steel guide tubes.
- 4 Nylatron roller bearing systems.
- Adjustable vertical and horizontal rulers.
- Quick change from vertical to horizontal cutting.
- Thin material pressure guard.
- Injection-molded plastic material rollers.
- Spring loaded counter balance system.
- Integrated dust collection bonnet.
- Extended warranty.
- TUV certified to UL/CSA standards
- Wall mounted
- Wheels not included
- Dust Collection not included
Add to cart Details
G1033Z Grizzly Industrial- 20″ 5 HP Planer

$3,250.99

This planer is simply a reliable, heavy-duty 20" planer. If you need a 20" Planer that you can rely upon to get the job done with quality results and trouble-free operation, then look no further. There have been versions of the G1033 in the Grizzly line for over 20 years with tens-of-thousands of them sold and smoothly churning out countless board feet of material on a daily basis. We are reintroducing this no-frills, all-performance classic version from an extremely reliable Taiwanese factory. While still feature-packed, it has only the most highly-desired features to keep the value up and the price as low as possible.

Add to cart Details
C4 PANEL SAW SAFETY SPEED VERTICAL PANEL SAW w/ Accessory Package

$3,279.00
DESCRIPTION
The C4 model packs all of the features of the full-size saws into a portable 5′ frame. This panel saw can travel to work sites and fit into shops with limited floor space. The C4 is ideal for cutting 4’–8′ sheets of material. Standard Equipment
- 3 ¼ Hp, 15 amp industrial duty saw motor.
- Zinc plated 1 ¾” steel guide tubes.
- 4 Nylatron roller bearing systems.
- Adjustable vertical and horizontal rulers.
- Quick change from vertical to horizontal cutting.
- Thin material pressure guard.
- Injection-molded plastic material rollers.
- Spring loaded counter balance system.
- Integrated dust collection bonnet.
- Extended warranty.
- TUV certified to UL/CSA standards
- Wall mounted
- QUICK STOP™ Gauge 5 ft./2.44m
- Dust collection kit (vacuum additional)
- Fixed stand/folding stand with C-Series
- Set of wheels
- 860ATB Foam Core Saw Blade
Includes Lift gate
Add to cart Details
Out of stock

Grizzly T10718 – 50″ Deluxe Pan and Box Brake

$3,295.95
T10718 50" Deluxe Pan and Box Brake

Easily form transverse or down-flanged parts.
The T10718 50" Deluxe Pan and Box Brake is used to make straight bends, boxes, pans, and trays in sheet metal that is 12-gauge or thinner. Clamping fingers and bending blocks of different lengths can be arranged to make 90° bends of varying widths up to 50" wide. The fingers and blocks can be spaced in any configuration necessary to permit the sides of a box to be bent without interfering with previously bent sides. Setback and clamping pressure are easily adjusted for different workpiece requirements, and the adjustable bending stop is used to make repetitive bends of the same angle.
Perfect for shops doing signs, fabrication, HVAC, or architectural sheet metal!
Like all Grizzly pan and box brakes, the T10718 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The T10718 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your pan and box brake. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the pan and box brake are available online and shipped from the Grizzly parts warehouse in Springfield, MO.
SPECIFICATIONS:
- Maximum working width: 50"
- Maximum sheet metal thickness: 16-gauge mild steel at full width
- Maximum height of pan/box sides: 2"
- Minimum reverse bend: 5/8"
- Maximum bending angle: 135°
- Overall dimensions: 63" W x 38" D x 44-3/4" H
- Approximate shipping weight: 945 lbs.
Details
Out of stock

Grizzly G1023RLX5 10″ 5 HP 240V Cabinet Table Saw with 7′ Rails

$3,299.99
- Motor size: 5 HP
- Tablesaw type: Cabinet
- Blade size: 10"
- Maximum cutting height @ 90deg: 3"
- Maximum cutting height @ 45deg: 2-1/8"
- Maximum ripping capacity - right: 60"
- Table type: Precision-Ground Cast Iron
- Overall table size: 74" x 27"
- Shipping weight: 550 lbs.
Details
South Bend 15″ Planer with Helical Cutterhead (SB1108)

$3,299.99
The helical cutterhead delivers near mirror-smooth finishes right out of the gate. It consists of four rows of 52 indexable carbide inserts, each angled slightly to produce a shearing action. This shearing action results in less tearout in highly figured woods and quieter operation—and the planed surfaces are far superior to what you'll get with 15" straight-knife or other spiral cutterheads on the market. SPECIFICATIONS:
- Motor: 3 HP, 230V, single-phase, 12A
- Maximum stock width: 15"
- Maximum stock thickness: 6"
- Minimum stock thickness: 3/16"
- Minimum stock length: 6"
- Maximum cutting depth: 1/8"
- Cutterhead diameter: 3"
- Cutterhead type: 4-row helical with 52 inserts
- Cutterhead speed: 5000 RPM
- Insert size and type: 15 x 15 x 2.5mm, indexable carbide
- Feed rate: Variable, 10–28 FPM
- Table size with extensions: 15" x 48"
- Dust port size: 4"
- Footprint: 22-1/2" x 23"
- Overall dimensions: 39" W x 48" D x 44-1/2" H
- Approx. shipping weight: 595 lbs.
Add to cart Details
SJO-67637K Original 1900 Workbench + Cabinet SM05

$3,340.00

Add to cart Details
Sjobergs Original 1900 Workbench and SM05 Cabinet Combo SJO-67637K

$3,342.00
- Features round and square 3/4 in (19 mm) bench dog holes
- Large shoulder vise won’t rack when clamping off-center
- No vise hardware to get in your way when working on long pieces
- Includes a 4-pack of round 3/4 in (19 mm) bench dogs and a 2-pack of square 3/4 in (19 mm) bench dogs
- SM05 bench has 3 sliding drawers, 2 cupboard doors, and 3 cubbies
- Original 1900 workbench was previously named the SB119 workbench
Add to cart Details
Sale!

Out of stock

GRIZZLY G0752 – 10″ X 22″ vARIABLE-SPEED LATHE

Original price was: $3,514.00.Current price is: $3,350.00.
- Motor: 1 HP
- Swing: 9 in.
- Distance between centers: 22 in.
- Spindle bore: 25 mm
- Spindle type: Threaded
- Speeds: 100 – 2000 RPM
- Tailstock taper: MT#3
- Tailstock barrel travel: 2-1/2 in.
- Shipping weight: 453 lbs.
Details
Oneida Supercell Hi-Pressure Dust Collector 30-Gal 5hp Model XSK000030

$3,395.00

Add to cart Details
Oneida Supercell High-Pressure Dust Collector (55-Gallon)

$3,395.99
The World's First Universal Dust Collector
Named Best Dust Collector by Popular Mechanics 2020 Tool Awards Oneida Air Systems' new Supercell® dust collector is the tool shop owners have been dreaming of: a single system that efficiently and effectively captures and contains dust from every tool in the shop with a dust port size of 1” to 5”. The Supercell is ideal for handheld and portable tools - even small CNC routers. Its adaptable design mounts conveniently to the wall and can be installed virtually anywhere in the shop, connecting to tools by up to an astounding 100 feet of 4” hose and ductwork.
Benefits & Features:
- 10x higher suction power than standard dust collectors, perfect for both handheld and benchtop tools with up to 5” dust ports.
- Combined 5HP fan blower motor operates at 230V with magnetic starter and overload protector.
- Accommodates simultaneous use of up to three tools with 1” to 2.5” dust ports.
- Wireless remote control operates at radio frequency - works through walls from up to 100' away.
- Ultra-high efficiency cyclone separator removes 99% of dust from the incoming airstream, virtually eliminating filter clogging and suction loss.
- HEPA-certified filter media rated at 99.97% efficient at 0.3 microns with non-stick, PTFE membrane.
- Internal pulse filter cleaner removes dust from the filter in seconds without needing to take the system apart for cleaning.
- Reinforced dust bin with automatic bag holder and fill level viewing window.
- Dust Sentry™ automatically alerts you when the drum is full and needs to be emptied.
- Mounts to wall with standard 16" stud spacing. Inlet rotates to match your shop's layout.
- Includes 25 feet of reinforced, 4" dia. vacuum-pressure rated flex hose.
Only use vacuum pressure rated flex-hose and duct with the Supercell dust collector. Under the system's high suction, standard hose/pipe may collapse causing affixed tools to be pulled towards the system, potentially causing damage and/or injury.
- UNIVERSAL COLLECTION – Combined 5HP fan blower motors easily accommodate the widest range of tools, including handheld sanders, table saws, and miter saws to jointers, planers, and even CNC routers with up to an astounding 100’ of 4” hose or ductwork.
- HEPA FILTRATION - Premium HEPA filtration rated at 99.97% efficient at 0.3 microns with non-stick, PTFE membrane. Internal pulse filter cleaner removes clogs in seconds without needing to take apart the system for cleaning. Plus, high-efficiency cyclone separator removes 99% of the dust before it even reaches the filter.
- FLEXIBLE USE – Available as a wall-mounted system with either a 14-, 35-, or 55-gallon collection bin, or as a mobile unit with a 14-gallon bin.
- INNOVATIVE FEATURES include wireless remote, pulse filter cleaner, dust bin with liner bag holder and fill level viewing window, Dust Sentry bin level sensor, and more – all in a compact footprint and profile. Patent Pending.
Add to cart Details