-
Out of stock
This 8" Parallelogram Jointer features extra-long infeed and outfeed tables that can be adjusted transversely and longitudinally to each other for ultra-precision face flattening and edge jointing. Table levers with positive table locks provide quick and precise height adjustments, and the pedestal-mounted power switch is conveniently located for easy on and easy off. This version features a straight knife cutterhead. -
Grizzly Industrial, Inc. has grown into one of the largest machinery companies in the United States. Their products can be found in all sizes of shops from the large industrial production users to the smaller cabinet and machine shops. They have the widest product selection under one brand in the world. -
Out of stock
Rikon 2.5 HP Cyclone Dust Collector 1470 CFM
The 2.5 horsepower cyclone dust collector has a newly designed impeller that reduces the stress on the motor while meeting or exceeding air flow compared to other cyclones in their class. This reduced stress allows the motor to operate cooler, more efficient and has up to 33% less cost to operate. This improves the longevity of the motor. Equipped with remote control start functions that operate on bluetooth RF band technology which increases range and ability to operate the unit from a different room. This unit has 1470 CFM. Three four inch dust ports. Built in casters for mobility. Large plastic bag liners are used for the dust containment barrel.
FEATURES
2.5 HP - 1470 CFM3 - 4 In. dust portsIncludes casters for easy mobility around the shopMore efficient motor save up to 33% cost to operateQuick release for easy cleaningSingle Phase60 Hz., 3450 RPM, TEFC MotorSPECIFICATIONS
RIKONStk no. 60-2500Air Volume (CFM)1470Assembled Depth (in)40Assembled Weight (lbs)310Assembled Width (in)30Assembly RequiredPartialAutomatic Shut-OffNoBrand / Model CompatibilityRikonCountry of OriginChinaCSA CertifiedNoDecibel Rating (dB)83.7ETL ListedYesglobalTradeItemNumber (GTIN)00814463015217Height (in)60Horsepower (hp)2.5MaterialMetalPackage ContentsDust Containment SystemPackage Depth40Package Height60Package Weight310Recommended Safety EquipmentSafety GlassesStand IncludedYesUL ListedNoUPC814463015217Vacuum AttachableNoVoltage230 -
The Shop Fox W1812 Planer Moulder features precision ground cast iron wings for greater work support, T-slots for easy guide rail adjustment, pedestal mounted switch, improved chip clearance, one-piece enclosed stand and variable speed control for unsurpassed planing and moulding capability.- Main motor: 2HP, 220V, single-phase, TEFC, 3450 RPM, Power feed motor: 1/4 HP, 180VDC, 1.5A, Feed speed: 0 - 18 FPM
- Precision-ground cast iron infeed and outfeed extension wings
- Dovetailed way for cutterhead housing with precision gib adjustments
- Variable speed power feed with chain drive power transfer
- Pedestal-mounted control switch with variable speed control
-
Out of stock
- Motor: 3 HP
- Table size: 76" x 8"
- Table type: Precision-Ground Cast Iron
- Table adjustment: Parallelogram
- Cutterhead type: Helical
- Cutterhead diameter: 3-1/16"
- Max depth of cut: 1/8"
- Fence size: 4-1/2" x 38"
- Shipping weight: 487 lbs.
-
DESCRIPTION
The C4 model packs all of the features of the full-size saws into a portable 5′ frame. This panel saw can travel to work sites and fit into shops with limited floor space. The C4 is ideal for cutting 4’–8′ sheets of material. Standard Equipment- 3 ¼ Hp, 15 amp industrial duty saw motor.
- Zinc plated 1 ¾” steel guide tubes.
- 4 Nylatron roller bearing systems.
- Adjustable vertical and horizontal rulers.
- Quick change from vertical to horizontal cutting.
- Thin material pressure guard.
- Injection-molded plastic material rollers.
- Spring loaded counter balance system.
- Integrated dust collection bonnet.
- Extended warranty.
- TUV certified to UL/CSA standards
-
A must have for any serious woodworker, the Baileigh Industrial SS-2725 spindle shaper arrives to you with everything you need to start making chips. The included 3/4” arbor 1” arbor, ¼” router collet, and ½” router collet are powered by a 3hp, 220V single phase motor which drives the spindle at either 8,000 or 10,000rpm. The cutter protrudes from a 25” x 20” cast iron table with 3 spindle plate inserts; a 25” x 7” cast iron table extension is included. The on/off, spindle direction, and spindle height controls are all mounted on the front of the machine, with the spindle lock located to the side for ergonomic access. Atop the table lies independently adjustable fences, 2-way adjustable cutter guard w/ window, 4” dust port and vertical/lateral hold downs, everything needed to start working on custom molding, trim, panels, and many other wood projects. -
Out of stock
Cut both woods and metals with this 2 HP 17" Combination Bandsaw.
We've taken all the best features from our vertical wood cutting bandsaws and added variable-speed blade control with two speed ranges to allow this Combination 17" Bandsaw to double up as a wood-cutting and metal-cutting bandsaw with the power and cutting capacity to tackle just about anything! You will find many other features that have made Grizzly chainsaws so popular with our customers such as an included cast iron fence with extruded-aluminum rail and resaw fence attachment, rack-and-pinon upper guide adjustment, cast iron trunnion, cast iron wheels and rack-and-pinion table tilt control. This bandsaw has everything you could wish for, including variable speed! The Grizzly G0640X Metal/Wood Bandsaw is covered by a one-year warranty that covers replacement parts and guards against factory defects. The G0640X is supported by a US-based product support team and replacement parts are available on-line and ship from our massive Parts Department in Springfield Missouri. This bandsaw is produced in a ISO 9001 factory to assure quality. Features:- Variable speed control
- Requires single-phase power
- Left and right table tilting control
- Upper and lower ball-bearing blade guides
- Rack-and-pinion adjustment on upper blade guide support
- Precision-ground cast iron table
- Fully balanced cast iron wheels with rubber tires
- Quick release blade tension
- Two 4" dust ports
- Includes rip fence and miter gauge
- Rip fence comes with: magnified cursor, dead lift quick release, solid lever lock and extruded aluminum resaw fence that also transforms for cutting thin stock
- Motor: 2 HP, 220V, 3-phase, 1725 RPM, 8 Amps (Actually runs on single-phase, 220V)
- Maximum cutting height: 12"
- Throat capacity: 16-1/4"
- Blade length: 131-1/2"
- Blade size range: 1/8"-1"
- Included blade size: 131-1/2" x 1/2" x 6 TPI (similar to Grizzly model H4807 wood cutting blade)
- Blade speed: Variable, 100-3600 FPM
- Table tilt: 45° right, 5° left
- Floor to table height: 37-1/2"
- Table size: 23-5/8" x 17-1/4"
- Overall size: 32" W x 73" H x 32" D
- Approximate shipping weight: 416 lbs.
-
Sale!
Out of stock
The G0941 10" 3 HP 220V Cabinet Table Saw takes power and precision to the next level with a digital readout for blade angle incorporated into the front of the cabinet. Now you can consistently dial in your bevels with absolute accuracy and achieve professional results every time. Tackle those big jobs with a large cutting capacity of 36" to the right of the blade, 18" to the left and a max. depth of 3-3/16". Use the clear plastic guard with anti-kickback pawls on each side of the steel splitter or the interchangeable riving knife to help prevent binding and kickback. A rail-mounted lockable magnetic switch has thermal overload protection, a locking pin, and a large safety STOP paddle. The heavy cast-iron trunnions add additional weight to the precision-ground cast-iron table for greater stability. Other features, such as a heavy-duty one-piece steel stand, included heavy-duty miter gauge, and much more, make this the ultimate Grizzly cabinet saw in its size. Like all Grizzly table saws, the G0941 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0941 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides detailed instructions on how to assemble and maintain your saw. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the table saw are available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory CSA certified SPECIFICATIONS:- Motor: 3 HP, 220V, single-phase, 13A
- Rip capacity: 36" right, 18" left of blade
- Max. depth of cut @ 90°: 3-3/16"
- Max. depth of cut @ 45°: 2-3/16"
- Table size with extension wings: 45-1/4" W x 27" D
- Distance from front of table to center of blade: 14-7/8"
- Floor-to-table height: 35"
- Arbor diameter: 5/8"
- Arbor speed: 4000 RPM
- Max. width of dado: 3/4"
- Dust port size: 4"
- Footprint: 23" L x 21" W
- Overall dimensions: 75" W x 44" D x 42-1/2" H
- Approximate shipping weight: 587 lbs.
- Digital readout for blade angle
- Rail-mounted switch with locking pin and large STOP paddle
- Quick-release blade guard and spreader
- Comfortable polished chrome handles
- Precision-ground cast-iron table
- Heavy-duty miter gauge
- Smooth-running and quiet poly-V serpentine belt drive
-
Out of stock
Cut panels & wide stock all day long with this 10" Heavy-duty Cabinet Table Saw. A 52" rip capacity & extended side & rear tables will support a full sheet of plywood, making ripping & cross cutting operations safe & simple. A guard with splitter or interchangeable riving knife helps prevent binding and kickback, and a rail mounted magnetic switch with thermal overload protection provides additional safety features. Bevel cutting is also safe & precise with the left tilting blade & digital angle display. Includes a miter gauge & 10" blade. CSA certified meeting CSA C22.2 #71.2-08; CSA C22.2 #105-1953 and UL 987 standards! -
Out of stock
The Rikon 10-353 14" Professional Bandsaw is equipped with a large work table measuring 21-1/2" x 15-3/4" and a 13-5/8" throat which will allow the user to cut thicker material on a compact saw. The 3 HP motor with a blade speed of 4300 ft/min provides ample power for re-sawing and cutting other materials, such as, plastic composite and foam materials. -
Out of stock
Description
This Cyclone Dust Collector provides the efficiency of a 2-stage cyclone system with the portability of a single-stage dust collector. Features include high surface area pleated filters with paddles to mechanically knock off dust cake, remotely controlled magnetic switches, easy lid lifting levers for emptying collection drums, and a compact design for moving around the shop. Three models are available to suit most dust collection needs.Specifications
- Motor: 3 HP, 220V, 3450 RPM, 18A
- Intake hole size: 8"
- Impeller: 15" welded steel
- Collection drum size: 35 gallons
- Air suction capacity: 1941 CFM
- Static pressure: 11.0"
- Approx. shipping weight: 419 lbs.
California Proposition 65 Warning
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com