Shop – Page 73 – CT Power Tools

Tormek T-4 – Original Compact Water Cooled Sharpening System for Edge Tools – US Version

$527.00

Tormek T-4 – Compact Water Cooled Sharpening System for Edge Tools – US Version – English Handbook

Complete Water-Cooled Sharpening system for Wood Chisels, Plane Irons, Spoke Shaves, Carving Tools, Lathe Turning Tools, Knives, Axes and most edge tools
Accessories Jigs available to assist you in achieving a better than factory blade edge quickly
Includes complete instruction manual and easy to follow instructional videos for achieving professional tool sharpening results
Dual Grit 1-5/8" wide Sharpening Stone turns at just 120 RPM to ensure your blade does not overheat and the steel lose its temper
Die Cast Zinc top, Impact resistant ABS plastic, Industrial Quality Motor, Stainless Steel Hardware for long life, backed by 7 year warranty, made in Sweden

Add to cart Details

Rousseau – SmallShop Style Miter Saw Stand, Model 2875

$529.00

MODEL 2875 FEATURES

36” x 19¼” Platform Designed To Fit Saws With Wider Bases & Sliding Back
Fences Sturdy All-Steel Construction
Easy Fold-Down Wings For Confined Spaces
Powder Coated Finish

Add to cart Details

Out of stock

Rikon 10″ x 18″ Pen Lathe, 70-105

$529.00

Designed specifically at the request of pen turners who need a sturdy, dedicated machine for their craft, this scaled-down, basic mini lathe is constructed of cast iron so vibration is not a factor, unlike lathes made of aluminum. Five speed ranges cover the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing.

Details

Delta Power Tools 78-919BT3 Biesemeyer Fence, Black

$529.99

Delta Biesemeryer Black Table Saw Fence Body was the Industry's first hairline accurate fence for both left and right hand cuts.

Simple and accurate 3 point locking system rated industry best
Fits models 36-L352, 36-L552 and 36-L552LVC Type 2 Unisaws
Entire fence is adjustable for fast accurate cuts time and time again

Add to cart Details

Saw Trax Builders Extensions (28″) Standard Pair

$538.00

Add 28" of material rollers to each side of your panel saw! Works with both compact and full size models. Easily bolt on installation. For panel saws with steel sleeved material rollers refer to part #BDEXTSS.

Add to cart Details

Delta Power Equipment Corporation BC30T2 30-Inch T-Square Fence and Rail System

$539.99

The Delta 30 in. T-Square Fence and Rail system fits the Delta Unisaw. It comes with the fence, rails and table legs. It has laminated 9 ply birch plywood sides for durability and non-marring.

One piece 14 gage 2 by 3" rectangular steel guide tube, mounted to on 1/4" section angle iron rail.
Fence body constructed of 14 gage welded steel.
Fence securely clamps to both front tube only to insure perfectly parallelism to the blade front to back.

Add to cart Details

Makita XCU04PT 36V (18V X2) LXT® Brushless 16″ Chain Saw Kit (5.0Ah)

$545.95

Landscapers and contractors are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 36V (18V X2) LXT® Brushless 16” Chain Saw (model XCU04PT). With zero emissions, lower noise, and considerably less maintenance, the XCU04PT is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® batteries for maximum power, speed and run-time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.

The XCU04PT has a 16” guide bar and the Makita-built Outer Rotor BL™ Brushless Motor direct drive system motor with variable speed delivers 0-3,940 FPM for increased cutting speed. It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion batteries, and the saw is ready to use. Convenience features include a "tool-less" chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

Add to cart Details

General IntL 10-2000 Ceiling Mount Air Filtration System

$545.99

This air filtration system is setting new standards in clean air. With the smart technology the laser sensor continually scans the air in the room for dust, dirt, smoke and other particulates. When it senses those particulates it turns on to automatically clean the air. It senses particles as small as 3 Microns. Since it typically hangs above a tool or workbench the 2 LED lights will help light the project below. You can operate it in manual mode and control three speeds... 1750, 1300 & 880 CFM. At top speed you can clean the air in a 20' x 20' x 8' shop in just under 2 minutes, or over 32 times an hour. In the manual mode you can also control the times to set it at 1 to 24 hours by the hour with the convenient remote control.

Add to cart Details

Out of stock

Delta Power Tools 37-071 6 Inch MIDI-Bench Jointer

$549.00

After nearly 90 years of expertise in the woodworking business, DELTA Power Equipment Corporation (DELTA PEC) has become one of the most revered brands in woodworking tools today. DELTA Power Equipment Corporation focuses on innovations to help the woodworker create masterpieces easier and with more precision. The company designs, manufactures and distributes a variety of stationary woodworking tools including electric table saws, band saws, radial arm saws, scroll saws, drilling machines, jointers, planers, mortisers, lathes, grinders and dust collectors for the professional and advanced woodworking markets. Motor: 12 A, 120V, 1 Phase, 60 Hz, Universal

Durable cast iron construction increases weight providing stability and reducing vibration
Precision-machining of the table and fence ensures long term accuracy
Heavy duty, cast iron fence support system for accurate jointing
Simple fence adjust system with adjustable positive stops at90 and 45 in and out
Up to 1/8 in. depth of cut

Details

Saw Trax Mid Fence

$549.00

The Mid Fence is the most popular accessory for boththe Saw Trax Full Size and Compact Panel Saws! Allows user to cut smaller pieces at waist level. Features all steel construction with a powder coated finish. Shelf is easily removed for processing full sheets. Fully adjustable and sold as a pair (left side and right side).

Add to cart Details

Saw Trax Floating Router Plate Panel Saw

$549.00

The Floating Router Insert is compatible with any current model Saw Trax brand Panel Saw.

Floating platform generates uniform dados even on bowed or twisted material.
Perfect for V grooving ACM Panels! Make your own dimensional displays and architectural elements!
Fits on all current Saw Trax models.
Universal design accommodates most router motors. Porter cable 892 router recommended.
This set up allow the router to follow the contours of the sheet, giving consistent dado even on bowed or warped material.
Router not included

Add to cart Details

Out of stock

MODEL 2875XL SHOP STYLE MITER SAW INCLUDING STOP SYSTEM–36″ WIDTH

$549.90

Rousseau shop style miter saw with stop system. Designed to fit saws with wider bases & sliding back. Easy folding-down wings for confined spaces.

MODEL 2875-XL FEATURES

36” x 19¼” Platform
Designed To Fit Saws With Wider Bases & Sliding Back Fences
Sturdy All-Steel Construction
Easy Fold-Down Wings For Confined Spaces
Powder Coated Finish
Includes Stop System On Left Side

Details