-
Out of stock
These rugged, heavy-duty Stock Feeders feature continuous-duty motors that transfer power from the gear box to the feed roller through the roller chain and sprockets, providing superior positive feeding for all types of materials. The fully adjustable support columns feature moveable universal joints and heavy locking mechanisms that lock the feeder in horizontal, vertical, or angle feed positions. Solid cast iron construction of bodies, bases and universal joints provide stability with vibration-free feeding. -
Outer Pleated Filter (5 micron) for 62-400- For use with 62-400
- Filter size: 9-1/2″ x 16-1/2″ x 1″
- 5 Microns
- Cardboard frame
-
Out of stock
JET JSG-6DC 6"x48" Belt / 12" Disc Benchtop Sander, 1-1/2HP, 1Ph 115/230V (708599)
About this item
- VERSATILITY: Precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles.
- LONGER LIFE: Graphite-covered steel platen runs cooler, increasing machine and belt life.
- EFFICIENCY: 4" dust port on the back of the base collects dust effectively from both the belt and disc.
- POWERFUL: 1-1/2 HP motor easily handles the toughest sanding operations.
- PORTABILITY: Built-in handles make machine relocation easier.
-
Out of stock
-
Out of stock
G1183 6" x 48" Belt/12" Disc Combo Sander
Built to the scale and level of quality professional woodworkers and metalworkers demand.
The heavy-duty G1183 6" x 48" Belt/12" Disc Combo Sander features a sanding belt that operates horizontally, vertically or at any angle in between. The sanding belt speed is 5000 FPM and the disc speed is 3450 RPM. Both cast-iron tables tilt for any job. The belt sander table tilts 90° while the disc sander table tilts 30° left and 45° to the right. The convenient, quick-release lever makes tension adjustment and belt changes and a snap. There is a full range of replacement sanding belts and sanding discs for the G1183. Belt rollers have shielded ball bearings and the top roller has a fine-tuning knob for precision tracking. The base accepts 5/8" fasteners for mounting to workbench. Like all Grizzly combination sanders, the G1183 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G1183 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the combination sander may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factorySPECIFICATIONS:
- Motor: 1 HP, 110V/220V, single-phase, 12A/6A
- Sanding belt size: 6" x 48"
- Sanding belt speed: 5000 FPM
- Belt platen size: 6" x 14-1/2"
- Belt table size: 7" x 12-1/2"
- Disc diameter: 12"
- Disc backing type: PSA
- Disc speed: 3450 RPM
- Disc table size: 7" x 16-1/2"
- Table tilt 30° L, 45° R
- Number of dust ports: 2
- Dust port sizes: 2-1/2", 3"
- Footprint: 17" x 14"
- Overall dimensions: 32-1/2" W x 16-1/2" D x 29-1/2" H
- Approximate shipping weight: 148 lbs.
FEATURES:
- Quick belt release
- Disc table positive stops at 90°
- Belt table positive stops at 45° and 90°
- Two cast-iron tables
- Top roller has fine tracking knob
- Miter gauge included
-
The 13" Combination Brush/Drum is the answer to your production bottleneck. Developed with mouldings in mind, this versatile sander can tackle every step in your finishing process, from sanding raw wood to sanding in between coats of stain or primer. Read about other applications below. This model features a 1-3/4 HP motor, and can handle stock up to 4" thick, or as thin as 1/32". It can also be equipped with an optional sanding drum for surface sanding.- Raw Wood Sanding | White Wood Sanding
- Break sharp edges
- Open grain for even finish absorption
- Blend out minor defects
- Sealer Sanding | Primer Sanding | Scuff Sanding
- Removes raised fibers and grain (denib/defuzz)
- Degloss previously finished wood
- Clean reclaimed wood
- Wire Brushing
- Distress (weathered/Southwest finish)
- Pull out soft grain to create textured surface
Sanding Capacity: Maximum Width (in): 13 Minimum Length (in): 9 Maximum Thickness (in): 4, varies with drum/brush style Minimum Thickness (in): 1/32*Dimensions (in): 35L x 42W x 44HDrum (in): 5 x 13 extruded aluminum.Brush (in): 6-8 typical diameter.Speed: ranged variable RPM, 400-1200Dust Hood: 1- 4" port, hinged at back, 600 CFM min. recommendedConveyor Motor: 43 in.-lb. torque, ranged variable, 0-10 FPMDrive Motor (TEFC): 1-3/4 HPPower Requirements: 110 Volt, 20 amp serviceShipping Weight (lbs): 300 (approx., varies based on how equipped) - Raw Wood Sanding | White Wood Sanding
-
Out of stock
1-1/2 Horsepower 6" x 79" Wood Edge Sander with Extra Large Tables
This 6" x 79" Edge Sander will shift your expectations of what an edge sander should be. The pivoting motor and platen design makes horizontal-to-vertical position changes a breeze, and with 3-1/2" of vertical edge-table travel and the ability to tilt both edge-table and end-table from 0-45°, you'll have all the angles covered. The 6" x 79" belt rotates around a 2-3/4" end roller for tight radius sanding, and belt tracking and tension are easily adjustable with conveniently located lock knobs. -
Out of stock
Shop Fox M1013 Metal Cutting Bandsaw
5 inch x 6 inch
A bandsaw is a must for any metal shop, and with three speeds, an automatic shut off, and ball bearing blade guides, the Shop Fox M1013 comes equipped with many important performance features. One of these features providing great versatility is the swiveling headstock so there is no fussing with establishing the cut angle at the vise. Just set the workpiece length, and swivel the headstock to an angle between -45 to +60-degrees and make the cut.
- Overall height: horizontal 42-1/2 inches; vertical 54-3/4 inches
- Footprint: 26-1/2 by 20-1/2 inches
- Blade size: 64-1/2 by 1/2 inch
- Blade speeds: 80, 120, 200 FPM
-
Out of stock
RF Remote Control Transmitter for JCDC1.5 Dust Collecto
Allows operator to control the dust collector from a distance. Always trust genuine JET parts for your JET Tools. They are guaranteed to fit and work perfectly in your equipment.
-
5 Pack of plastic bags 152 gal. -
5 Pack of plastic bags 152 gal. -
5 Pack of plastic bags for use with your T|Flux 5HP Dust Collector 48 gal.
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com