- Upgrades any make/model shop vacuum with 1.5" to 2.5" hose fittings.
- Neutral-vane technology improves separation efficiency by 20%.
- All-clear components let you see how full the bin is from far away.
- Collapse-proof 5 gal. bucket won't fold under high vacuum pressures.
- Reinforced, quick-release, cyclone lid allows for fast and easy emptying.
- Caster Mounts widen the cyclone kit's base for a highly stable and portable setup.
- Highly flexible, wire-reinforced, polyurethane vacuum hose.
- Anti-static components significantly reduce the likelihood of static shocks.
- Optional tether kit connects the cyclone kit to your vacuum.
-
Original, patented, cyclone design stops up to 99.9% of fine dusts and bulk debris from clogging your vacuum's filter - eliminating suction loss while saving you time and money on expensive replacements! Deluxe kit comes with everything you need! -
Durable MicroGrain Titanium Carbide teeth for razor-sharp cuts and long life. Perma-SHIELD® permanent coating prevents gumming and corrosion. Laser-cut thin kerf design gives fast & clean cuts. Laser-cut stabilizer vents give reduced vibration and precise cuts. Covered by Freud®'s Limited Lifetime Warranty. Freud® Part No. D0740A Dia. 7 1/4" No.Teeth 40 ATB Arbor: 5/8" Kerf: 0.590!0 -
The M18™ Dual Bay Simultaneous Rapid Charger is capable of charging 2 battery packs simultaneously, over 3X faster than standard sequential chargers. The charger accepts all M18™ batteries. Equipped with REDLINK™ Intelligence, this charger communicates directly with M18™ batteries to monitor cell voltage, temperature and charge status to deliver the best combination of charge duration and pack lifespan. Simultaneously charging batteries at a rapid charge rate massively reduces downtime and maximizes productivity. Its compact size makes this an ideal charger to carry on and off the job, hang in a work trailer, or charge on the top shelf of a job box. -
- Milwaukee 4-pole frameless motor: features a robust design combined with rare-earth magnets for longer life, best-in-class 500 in. lbs. of torque and 0-450/0-1,800 RPM
- Single sleeve ratcheting chuck: all-metal 1/2 in. chuck optimizes grip strength and reduces slippage
- Built-in LED light: illuminates surfaces for faster, more efficient work
- 525 in. lbs. of peak torque
- 0-450/0-1,800 RPM
-
Out of stock
Marking Gauges have been around for centuries but nothing has been designed to dial in your exact measurements, until now. Introducing the new JessEm Wood Sabre Marking Gauge. Once again JessEm has taken a basic tool and made it innovative by enabling a marking gauge to be preset to any pre-determined position.- Woodworking marking gauge
- Possibility to preset position to a pre-determined position
- micro adjustment availables
- High quality product.
- Made in Canada
-
Handy 820 W compact angle grinder with paddle switch and dead man function for light grinding and cut-off work. Details- Perfect ergonomics due to slim grip.
- Work with minimal fatigue due to low weight.
- Solid metal drive head for maximum robustness and service life. It rotates in 90° steps for excellent access in tight spots.
- Paddle switch with dead-man function.
-
Out of stock
-
Out of stock
This is Forrest's most popular blade. With this one all purpose blade you can RIP & CROSSCUT 1˝ - 2˝ ROCKHARDS and SOFTWOODS resulting in a smooth as sanded surface virtually without splinters. FEATURES: • 20° Face Hook for easy feed. • Our DOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings • Ends blade changing (one blade does rip, combo and crosscut). • Ends scratchy saw cuts • Ends second-step finishing • Ends cutting 1/16˝ oversize to allow for RESURFACING • Buy and Sharpen ONE blade instead of 3: (24T Rip, 50T Combination, 80T Crosscut) • Use 30T version if ripping mostly 2˝-3˝ Thick hardwoods • Side wobble is held to .001˝ - with other brands .004/.010 is common! • RAISE the blade for THICK woods. LOWER the blade for THIN woods and get perfect cuts every time. • Specially engineered clearances on the carbide teeth can totally eliminate side scoring. The result…no planing/jointing or sanding. In many cases a glue-line cut can be obtained, depending on the accuracy of the saw machine • Optional thin-kerf 3/32˝ width blades are available in 10˝ diameter for EASIER CUTTING with minimum power saw machines. They also remove 25% less material. -
- Set consists of 1 bit and 1 chisel
- Made of the highest quality tool steel
- High performance flute design geometry for superior chip extraction
-
Out of stock
H6070 1" x 30" Belt/5" Disc Combo Sander This sander pretty much does it all. The H6070 1" x 30" Belt/5" Disc Combination Benchtop Sander offers a 1" wide by 30" long belt sander and a 5" disc sander in one portable unit. Both the belt and disc sanding tables tilt 45° for added versatility and the removable belt platen and idler roller guard make contour sanding a breeze. Just read some of the positive reviews this sander gets: “It's amazing how much work this little machine has saved me as I go about making small bandsaw boxes and other projects.” Danielschweighauser72 “This machine is perfect for the needs of modeling. You will be very glad you spent your money for this sander.” paulpotteryartist “It is the prefect size when working with small parts.” insanityi Ideal for sanding intricate parts, contour sanding, and dry sharpening. Like all Grizzly benchtop machines, the H6070 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The H6070 manual was written by the U.S. based Grizzly Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the sander are available online and shipped from the Grizzly parts warehouse in Springfield, MO. SPECIFICATIONS: Motor: 1/3 HP, 110V, single-phase, 2.5A Sanding belt size: 1" x 30" Sanding belt speed: 3150 FPM Belt sander table size: 5-1/8" x 5-1/8" Belt sander table tilt: 0–45° Belt platen size: 1" x 3" Disc diameter: 5" Disc backing type: PSA Disc speed: 3450 RPM Disc sander table size: 4" x 7-5/16" Disc sander table tilt: 0–45° Dust ports: 1-3/4" and 1-13/16" Overall dimensions: 14" W x 10-3/4" D x 14-1/2" H Approximate shipping weight: 21 lbs. FEATURES: Dual dust ports Adjustable platen Universal positioning lock levers Manual belt tracking adjustment Takes standards 1" x 30" belts and 5" PSA discs Machined aluminum tables -
Out of stock
Features
- For use with stacked dado
- Constructed of 1/2" melamine-coated, solid phenolic resin
Specs
- Only for dual front hand wheel Unisaws
-
Out of stock
80-910
Bench Grinder Stand- Adjustable Height 28″ – 36″
- 2″ Diameter Steel post with cast iron base
- Storage for two grinding wheels
- Steel top measures 12″ x 9 1/4″ with 1/2″ wide slots for mounting grinders