- One piece 14 gage 2 by 3" rectangular steel guide tube, mounted to on 1/4" section angle iron rail.
- Fence body constructed of 14 gage welded steel.
- Fence securely clamps to both front tube only to insure perfectly parallelism to the blade front to back.
-
Out of stock
The Delta 50 in. T-Square Fence and Rail system fits the Delta Unisaw. It comes with the fence, rails and table legs. It has laminated 9 ply birch plywood sides for durability and non-marring. -
The DELTA 31-819 120 Grit Pre-Cut Sanding Strips is designed specifically for the DELTA 31-250 Wide Drum Sander. Installation is simple thanks to the cloth-backed strips being pre-cut for the 5-inch diameter and 18-inches wide drum. The strips are coated with aluminum oxide abrasives for long lasting, effective sanding. The 120 grit sanding strips leave a fine finish. Includes four strips.- Pre-cut sanding strips for DELTA 31-250 Wide Drum Sander
- Cloth-backed strips
- Aluminum oxide abrasive for long lasting sanding effectiveness
- 120 grit leaves a finer finish
- Four strips included
-
This 4-pack of DELTA 31-818 100 Grit Pre-Cut Sanding Strips are designed to work with the DELTA 31-250 Wide Drum Sander. These cloth-backed strips come precut (5 x 18 inches) to the proper length and come coated with aluminum oxide abrasives for long life and smooth finish.
- 4-pack of cloth-backed sanding strips
- Designed to work with the Delta 31-250 and 31-255 Wide Drum Sanders
- Pre-cut to the proper length
- Aluminum oxide abrasives for long life and a smooth finish
- 100 grit
-
Out of stock
-
-
A feature-packed Table Saw for shop owners who don't need all the heft and horsepower (and extra cost) of a true cabinet saw. This Hybrid Table Saw features cabinet-mounted trunnions and an enclosed steel upper-stand for maximum dust containment. Despite its hybrid design, cutting capacities stand toe-to-toe with the most expensive cabinet saws in the market and the interchangeable riving knife offers protection for non-through cutting operations that require removal of the blade guard. Also features a serpentine belt and pulley system for smooth and quiet operation with better power transfer than a standard V-belt drive system. This saw is sure to be the envy at any shop or worksite. -
-
Improved, high airflow, cyclone design stops over 99% of fine dusts and bulk debris from clogging your vacuum's filter - eliminating suction loss while saving you time and money on expensive replacements! 10 Gal. Deluxe kit comes with everything you need for heavy dust loads!- The latest and greatest edition of the original dust cyclone!
- Up to 2x the airflow of smaller cyclones and lid-style separators.
- Upgrades any make/model shop vacuum with 2.5" hose fittings.
- Neutral-vane technology improves separation efficiency by 20%.
- Large 10-gallon steel drum contains heavy dust loads.
- Highly portable design with stable caster wheel base.
- 4-1/2 foot crush-resistant hose features 2.5" hose cuffs.
- Anti-static components significantly reduce the likelihood of static shocks.
Waste Capacity 10 Gallons Portable Yes Inlet Size Nominal: 2.25" I.D. / 2.5" O.D. Actual: Tapered 2.31" to 2.29" I.D. Outlet Size Nominal: 2.25" I.D. Actual: Tapered 2.31" to 2.29" I.D. Discharge Size 3" I.D. Primary Build Materials Steel, Polypropylene Thickness 22 Gauge (Drum Body) Static Resistance Rating Anti-Static Color Clear Width 19" Height 34-1/4" Height to Center of Inlet 32 -7/16" Product Compatibility Wet/Dry Vacuums with 2.5" hoses and inlets Contents Cyclone Separator, Pre-Cut Drum Lid, Lid Clamp, Drum Dolly, Caster Wheels, Hose, Hardware Manufacturer Oneida Air Systems Country of Manufacture United States Warranty Information 1 Year Limited Warranty Proposition 65 WARNING: This product may expose you to chemicals, including Nickel (metallic), which is known to the State of California to cause cancer or birth defects or reproductive harm. -
Delta’s 36-L552 left tilt cabinet saw is ideal for woodworking, cabinet making, and boat building. It features up-front dual-crank controls with locking cams, speedometer style scales and a 52 inch Biesemeyer fence. The 5HP 220V motor cuts hardwoods and engineered products like MDF and melamine. The riving knife enables tool-less adjustment for through- and non-through cuts including grooves for shelves and picture frames as well as dadoes, rabbets, and cheek cuts for furniture. The single-cast trunion provides increased vibration control. Largest throat plate in category eases blade changes. Storage under the table board is convenient and expandable. Bi-level dust extraction improves dust collection. The 36-L500 is one of several pieces that make the 36-L552.- Single-cast trunnion system results in incredible vibration control providing continuous smooth operation and dependable accuracy
- Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
- The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4 degree
- The Cabinet Construction consists of a large cast-iron base providing stability and solid footing; True american marathon motor provides added power and is available in both 3 and 5 hp
-
Out of stock
With the Ultimate Dust Deputy® you can combine Oneida's patented Dust Deputy® cyclone with the quality and performance of a Festool® CT Dust Extraction System to create the ultimate three stage vacuum system!- Industrial static conductive, 9 Gallon (34L) container
- Dust Bagger, plastic bag hold-down system. No messy dumping - allows easy removal of dust in plastic bags.
- Static conductive cyclone separator, hose, and components
- Compatible with any vacuum
- Attaches directly to Festool CT Dust Extractors
- Maintains grounding path for industrial applications using a grounded-inlet vacuum
- Vacuum Not Included
-
The Resaw King is the ideal blade for anyone cutting hardwoods or exotics, providing ultra smooth cut quality with minimal material loss. Nearly a decade in the making, the Resaw King has been skillfully finessed into one of the best woodworking blades in the world. Created by Torben Helshoj, an award winning woodworker, the Resaw King displays his passion for the art. Made from a C4 carbide tipped alloy, the Resaw King can be resharpened 4-5 times. Variable tooth spacing significantly reduces vibration while producing sleek smooth cuts. This dynamic blade also cuts down wood waste due to its ultra-thin kerf and backing material. The Resaw King is manufactured in Germany exclusively for CET and is perfected here, in the USA, by our skilled team of professionals using our full line of CNC machines. Little if any sanding is needed after each cut, produces an extremely smooth cut you will have to see to believe. Specs: C4 Carbide Tipped. RESHARPENABLE. Backing: .024″ – .6mm. Pitch: 12mm, 14mm, 16mm. T.P.I. 2-3 Variable. Kerf: .044″ – 1.1mm -
These high-performance CA glues (cyanoacrylate adhesives) take just 5-15 seconds to set and 30-60 seconds for initial cure. For even faster adhesion, the Instant Bond Activator cuts set time nearly in half. Available in 2 or 4 oz. bottles.Designed primarily for wood and wood products, these adhesives also provide strong, permanent bonds in a wide variety of materials and substrates.Instant Bond - Thin 5-Second Handling Time 3-Second Set Time Ideal for wicking hair-line cracksInstant Bond - Medium 7-Second Handling Time 5-Second Set Time Designed to fill knots and voids Instant Bond - Thick10-Second Handling Time 8-Second Set Time Designed for finish and trim carpentry Instant Bond - Gel 30-Second Handling Time 20-Second Set Time Ideal for MDF and porous woods, as well as for filling in large gaps.