Shop – Page 2 – CT Power Tools

Jet Abrasive Sand Paper Rolls

Benchtop Drum Sander stk no.723510

Baileigh Industrial Magnetic Box and Pan Brake BB-7216M

This magnetic sheet metal brake enables you to make enclosed shapes that would be impossible on a traditional box brake.

Runs on 220-volt single-phase power.
16 gauge mild steel maximum capacity.
6-foot (72”) length lets you to get creative with uses for this sheet metal brake.
Offers all the features of our BB-4816M model—but with 2 feet of extra length.
Maximum bend angle of 180°.
Industrial magnetic power of 6 tons is consistent across the entire beam, producing crisp bends even in the middle.
Unlimited box depth thanks to its open-ended design.
Also makes straight bends if you choose to set up straight (instead of segmented) bars.
You can adjust the finger setback for different thicknesses.
Easy to operate. To make a bend on the BB-7216M:
- Put a piece of material between the clamping bar to the depth required.
- Hit the foot pedal control that softly clamps the material and reposition if necessary.
- Lift the leaf arms to engage full magnetic power, holding the material in place as the leaf arm makes the appropriate bend.
Supplied back gauge helps you repeat bends and parts exactly.
Scaled stroke angle control is convenient for production.
For tighter bends, you can remove the bottom leaf's bending extension.
Baileigh covers this electromagnetic sheet metal brake with a 1-year parts warranty.

Details

Out of stock

Baileigh 1007014 Single Phase 3 hp 25″ x 5″ Drum Sander with Variable Speed

CURRENTY IN STOCK. HOWEVER, DUE TO VOLATILE MARKET CONDITIONS, PLEASE CONFIRM AVAILABILITY PRIOR TO ORDERING. This 25”-wide heavy-duty drum sander is a perfect choice for small businesses and hobbyists that are sanding panels around 3 to 5 hours a day. It’s an economical alternative to a planer. Order this 25 inch drum sander from Baileigh Industrial.

Maximum thickness of 5” and minimum of ¼”.
Dual 5” sanding drums turns at 1,800 rpm.
Variable speed conveyor can adjust from 6 to 24 feet per minute.
3 hp main motor runs on 220-volt single-phase power.
Convenient adjustment screw ensures that the sanding drum stays parallel to the conveyor belt.
Easy-to-access drums allow for convenient sandpaper changes.
Includes 2 dust ports (4”) that you can hook up to a dust collector to keep your shop air clean and safe.
2 drums let you use different abrasives at once: for instance, 120 grit for taking material off, then 220 grit to refine the surface.
Rigid steel base keeps vibrations down to a minimum. Most competitors can’t match the sheer structural strength of our sanders.
This heavy-duty sander is covered by a 1-year parts warranty.
We keep replacement parts in stock for fast shipping from our Wisconsin headquarters.
You can count on lifetime technical support by phone from our team of experts, all with hands-on machine experience.

Details

Out of stock

Rapidfuse All Purp .85oz (Pack of 4)

FREE SHIPPING. We will refund shipping after you check out. This fast setting formula sets in only 30 seconds with a cured bond in just 30 minutes. New hybrid adhesive technology creates a bond that won't get brittle over time for two times better durability than regular super glues. Get a clear bond with no expanding foam, no dripping glue and no mess. Appropriate for indoor or outdoor use, RapidFuse is water resistant and works on most common household materials, from wood, metal, rubber, plastics, ceramics + porcelain, to glass, fabric, stone, concrete, tile + more.

Details

Out of stock

Large Live Edge Hard Maple Slab CVT LLC

Beautifully finished large hard maple live edge slab. Figured. Stunning conversation piece suitable for use

in any room of your house or office.

Plain sawn, perfectly flat, figured, KD
Approximate size 70" x 34" x 2" (approximate because the live edges are rugged and irregular in shape and dimensions).
Stunning gnarly live edge
100% handcrafted in U.S.A. Thoroughly protected.
Satin polyurethane finish
Actual photo of finished slab you will receive.
MinoreEpoxy crack repair on one end (see photo)
Show room model, faint scratches
Optional thick & sturdy black finish metal legs complete the look in a simple yet appealing way (cost $490 set of 2)
Free delivery within New England
Outliers please ask for freight quote.

Details

Out of stock

Grizzly G9860ZX – 12″ x 80″ Z Series Jointer w/ Spiral Cutterhead

This professional jointer is loaded with industrial features, such as precision-ground cast-iron parallelogram table adjustment, twin V-belt drive and a heavy-duty cast-iron base with noise dampening system. For the ultimate in precise table height adjustments, the close tolerance, precision-ground cast-iron infeed and outfeed tables are effortless adjusted through the handwheel controls. The G9860ZX combines a powerful 3 HP motor with a spiral cutterhead for unmatched finish and long-lasting cutting-edge durability compared to a machine with straight knives. No need to sharpen the blades every time they get dull or nicked. The 84 indexable carbide inserts can be rotated up to 3 times for a new sharp edge. Lastly, a jointer this size can save additional time and money by transforming unusable "cupped" lumber into perfectly flat stock. Like all Grizzly jointers, the G9860ZX comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G9860ZX manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete-and-easy to read manual makes it easier to assemble and maintain your jointer. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the jointer are available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory