Shop

Out of stock

SHOP FOX W1710—10 HP 24″ Wide Belt Sander

$13,999.99
Description
Numeric control pad and digital readout provide the ultimate in precision. Other features include quick-change belt system with automatic belt tensioning, air-controlled automatic belt tracking system, motorized table elevation control, adjustable air-controlled belt oscillation system, and load meter. Certified to CSA and UL standards.

Specifications

Sanding motor: 10 HP, 220V, single-phase, 1725 RPM, 50A

Feed motor: 1 HP, 220V, single-phase, 1725 RPM, 7A

Elevation motor: 1/3 HP, 220V, single-phase, 1725 RPM, 3A

Drum speed: 3550 FPM

Drum diameter: 8"

Feed rate: variable, 15–49 FPM

Max. stock width: 24"

Max. stock thickness: 6"

Min. stock thickness: 1/8"

Required air pressure: 75 PSI @ 7 CFM

Sanding belt size: 25" x 60"

Dust port: (2) 4"

Emergency stop bar with brake

Manual and motorized table elevation control

Sanding load meter

Digital readout and controls

Made in an ISO 9001 factory

Footprint: 39-1/4"W x 19-1/4"D

Height with dust ports: 71"

CSA certified meeting CSA C22.2 #105–1953 and UL 987–7 standards

Approximate shipping weight: 1870 lbs.

California Proposition 65 Warning
Details
Out of stock

Grizzly Industrial G9962ZX – 24″ 10 HP 3-Phase Wide-Belt Sander

$13,974.99

10 Horsepower 3-Phase 24" Wide Belt Wood Sander with Pneumatic Oscillation Control
These machines were developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. This collaboration resulted in the introduction of the G9962Z & G9962ZX, which have become the "staple" of the guitar building industry. The main features that enable these sanders to process short pieces efficiently are the single drum and double infeed and outfeed pressure rollers positioned close to the drum. The result is a continuous downward pressure on extremely thin stock as short as 9", which is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of hard rubber to prevent distortion of thin stock while sanding. Features include digital read out, powered table elevation, variable speed conveyor, disc brake stopping system, pneumatic belt tracking, pneumatic belt oscillation, and separate motors for the drum, feed rollers, and table elevation.

Details
Out of stock

Grizzly Industrial G0886-12″ x 14″ 3 HP 3-Phase Auto Metal Cutting Bandsaw

$13,800.00

With a fully automatic feeding, cutting and lifting cycle this saw steps productivity up to the next level. The hydraulic vise uses a built-in power feed system to feed material to the desired length determined by a fine tunable sensor. Simply set your cut length, set the desired number of cuts and blade speed, load your material, and press start-the G0886 does the rest! With an impressive 12" x 14" capacity and powerful 3 HP, 3-phase motor, the G0886 has the capabilities to process some serious material. The workhorse also features a built-in 6 1/2 gallon coolant tank and full wrap catch basin to ensure coolant stays where it belongs. Perfect for cutting heavy steel or aluminum stock, you can quick and easily adjust downward feed rate to help maximize blade life. This saw truly does it all! Note: Stock must be at least 1" tall for auto feed to work.

Details
Shop Fox W1737 37-Inch Single Phase Wide-Belt Sander

$12,999.99

Door builders and cabinet shops will love the extra capacity of this 37" wide-belt sander. Available with 15 HP 3-phase sanding motors, these wide-belts are built for daily industrial use with features such as a heavy-duty steel cabinet, pneumatic belt oscillation, and a built-in air filter/regulator. The digital control pad automates table adjustments and is accurate to 0.005". Also, the variable-speed conveyor, adjustable oscillation controls, and adjustable graphite/felt platen easily allow the operator to find the perfect combination of settings to achieve soft, smooth finishes on all types of wood.

Add to cart Details
Out of stock

Baileigh Industrial SHEET METAL BRAKE BB-12014

$11,160.00
This box brake can bend metal along its 10-foot width without twisting. You can bend 4 x 8 sheets at 45°, perfect for adding a stiffening rib to support long duct pieces.
- Maximum capacity of 14 gauge mild steel and 18 gauge stainless steel.
- 10-foot (120”) length enables your shop to take on a wide range of projects.
- Bends up to 135°.
- Heavy-duty truss rods support the apron to reduce flex on maximum capacity bends.
- Electro-welded all-steel framework keeps this metal brake accurate over decades of daily use at full capacity.
- 26 fingers of varying sizes (6 fingers of 3", 4 of 4", 10 of 5", 6 of 6") allow you to bend boxes and pans up to 6” deep.
- You can set up the individual hardened fingers for straight bending or box and pan configurations.
- Apron shafts ride in precise oilable bearings, maintaining tight bend tolerances and minimizing operator fatigue.
- 2 massive counterweights make it easy to bend at maximum capacity and reduce physical strain.
- Massively-built sheet metal finger brake weighs in at almost 3500 lbs.
Details
Out of stock

Baileigh Industrial Manually Operated Box and Pan (Finger) Brake BB-7212

$9,599.00
This 6-foot box brake offers a happy medium between our 4-foot BB-4812 and our 8-foot BB-9612. With a welded steel frame, the BB-7212 offers years of hassle-free productivity.
- Bends 12 gauge mild steel over its full 6-foot (72”) length.
- Maximum bend angle of 135°.
- 2 counterbalance weights make it easy to bend at maximum capacity and reduce operator strain.
- Electro-welded and truss-supported steel frame prevents distortion or twisting and produces high-quality bends.
- Comes standard with 17 hardened fingers of varying sizes (6 fingers of 3", 3 of 4", 6 of 5", and 2 of 6") .
- 3-piece finger design allows for a 6” box depth.
- You can set up a long straight brake or a segmented one for boxes or pans.
- Heavy-duty steel floor stand puts the beam at optimal working height.
Details
Out of stock

Baileigh Industrial STRAIGHT BRAKE HB-12016

$8,869.00
The HB-12016 sheet metal hand brake can fit an 8-foot sheet corner to corner, opening up wider project possibilities.
- Sheet metal hand brake bends16 gauge mild steel across its full 10-foot length (120”).
- Maximum bend angle of 135°.
- Top beam and bending leaf made from fully-welded plate steelprevents this hand sheet metal bender from flexing and ensures accurate bends.
- Steel support rods stabilize the machine.
- 2 heavy duty counterweights assist the operator and the reduce effort of bending full sheets.
- Comes standard with a stop rod to help you easily make repeatable bends for production runs.
- Main pivots, supports, and clamp levers are made from high-quality cast iron, then machined to exacting tolerances.
- Fully-welded steel stand can bolt to the floor for even more stability.
Details
Out of stock

Baileigh Industrial SHEET METAL LEAF BRAKE HB-9612

$8,709.00
This manual brake’s top beam and support trusses—made of fully-welded steel plate—will keep bends accurate at full capacity.
- Bends 12 gauge (or lighter) mild steel.
- 8 feet (96”) long.
- Maximum bend angle of 135°.
- Blade, precisely machined to exacting tolerances, produces the tightest possible bend radius.
- Steel floor stand sets the beam at a comfortable working height and stabilizes the machine during the bending process.
- Made from the finest quality components, including heavy cast iron clamp handles, to maintain rigidity.
- Comes standard with a stop rod, so you can easily make repeated parts and bends.
- Plate steel bending leaf, with integrated side pivots, uses bushings to help the machine last for many years and wear well.
- 2 heavy duty counterweights allow you to effortlessly bend at maximum capacity.
Details
SHOP FOX W1772 10 HP 37-Inch Drum Sander

$8,699.00

Designed for production shops, this 37" sander has what it takes to get those big jobs done—fast. Sand boards and panels up to 4" thick and 36-1/2" wide, using two different abrasive grits in the same pass with the dual 6" sanding drums. Feed speed is adjustable from 6 to 18 FPM. The variable-speed knob conveyor adjustment and amp meter make it easy to monitor the sanding load to ensure maximum efficiency. Other great features include a hinged hood, emergency stop bar, pedestal-mounted controls, four 4" dust ports, and a 10 HP, 240V, single-phase motor. Certified to CSA and UL standards.

Add to cart Details
Out of stock

Grizzly Industrial G0544-20″ 5 HP Pro Spiral Cutterhead Planer

$8,555.00

Details
Grizzly G0709 – 14″ x 40″ Gunsmithing Gearhead Lathe

$8,199.99
G0709 14" x 40" Gunsmithing Gearhead Lathe

An accurate and powerful lathe.
What makes the G0709 14" x 40" Gunsmithing Gearhead Lathe a "gunsmithing" lathe is that it comes with features typically not found on standard lathes, such as the high-precision NSK bearings, extra-large 1-9/16" spindle bore and a "spider" mount system. The spider mount system has four brass-tipped screws that stabilize long shafting and rifle barrels through the outboard end of the spindle. Supplied with a 2 HP motor, the 8-speed gearhead of the G0709 produces spindle speeds from 70-2000 RPM. The tailstock lock system features a drive hub, which allows you to use a 1/2” torque wrench to clamp the tailstock in place at a pre-determined torque setting. This ensures consistent draw-down alignment every time, even with multiple lathe operators using the machine. The G0709 features a foot brake that also acts as a safety device and can bring the machine to an instant stop. The G0709 also comes with a D1-5 spindle, a 200 series quick change tool post, flood coolant system, LED work light, and a pull-out chip tray. Like all Grizzly gunsmithing lathes, the G0709 comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0709 manual was written by our U.S. based Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your lathe. The Grizzly Technical Support team is U.S. based. Parts and accessories for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.
SPECIFICATIONS
- Motor: 2 HP, 220V, single-phase, 10A
- Swing over bed: 14"
- Distance between centers: 40"
- Swing over saddle: 13-13/16"
- Swing over cross slide: 8-13/16"
- Spindle bore: 1.57" (40mm)
- Spindle nose taper: MT#5
- Spindle nose: D1-5 Camlock
- Spindle speeds: 8, 70-2000 RPM
- Carriage travel: 36"
- Cross slide travel: 6-11/16"
- Tailstock barrel taper: MT#3
- Tailstock barrel travel: 3-15/16"
- Overall dimensions: 71-1/2" L x 26-3/16" W x 52" H
- Approximate shipping weight: 1550 lbs.
FEATURES
- Easy-to-use lever controls
- Hardened and ground cast-iron bed
- Cuts 4-112 Standard TPI and 0.1-7 Metric
- Cuts LH threads
- On/off reverse switch on carriage
- Socket for tailstock lock
- Cast aluminum gear cover
STANDARD EQUIPMENT
- 6" 3-Jaw chuck with reversible jaws
- 8" 4-Jaw chuck with independent jaws
- 11" face plate
- Steady rest/follow rest
- Full length splash guard
- Quick change tool post with 2 tool holders
- (2) MT#3 dead centers (1 carbide tipped)
- (1) MT#3 live center
- (1) MT#5 - MT#3 sleeve
- Pull out chip pan
- 1/2" drill chuck w/ MT#3 arbor
- Toolbox
Add to cart Details
Sale!

Out of stock

Grizzly Industrial G9933-3 HP Three Spindle Shaper

Original price was: $8,590.00.Current price is: $7,999.90.

This 3 sided, heavy-duty shaper will pay for itself quickly in cabinet and production shops that normally require several shapers or time consuming cutter changes. The combinations of cutters and set-ups you can utilize on this machine are endless.

Details