-
With a lifetime guarantee, Laser cut arbor, laser cut stabilizer vents, and MicroGrain Titanium Carbide come Included with (5) D0824X Diablo 8-1/4-inch 24 Tooth ATB Thin Kerf Framing Saw Blades are Ideal for framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding. With an adanced laser cut thin kerf for improve precision, accuracy, and longer cutting life. Includes (5) D0824X Diablo Framing Saw Blades with 5/8-inch Arbor. -
This Tenryu GM-30560 gold medal precision table saw blade is 12-inch in diameter and has a 1-inch arbor and is ideal for woodcutting and is one of the premier manufactueres of saw blades in the world. Use this blade for rip cuts, miter cuts, cross cuts and cut-offs. Woodworkers wiil love the super smooth cuts on hardwood, plywood, softwood and composites. -
Out of stock
This blade produces chipless, scratch-free, polished trim and cross cuts on hardwoods, softwoods, and plywoods. Its thin kerf reduces wood loss by 1/4, lessens "jump in" for better pull control, and virtually eliminates splintering and fuzz. -
3M Safety-Walk Slip-Resistant Tapes and Treads are designed to provide traction on slippery surfaces where potential slips and falls can occur or where safety may be a concern. 3M Safety-Walk Rolls and Strips features a heavy duty, mineral-coated, slip-resistant tread. Safety-Walk comes in a variety of sizes, colors, and materials. -
The M18™ TOP-OFF™ 175W Power Supply & M18™ REDLITHIUM™ XC5.0 Battery Pack set delivers faster simultaneous power to personal devices and small electronics. Attach this portable power supply to any M18™ battery (M18™ REDLITHIUM™ 5.0AH Battery not included) to provide continuous power or recharge devices with (1) AC 120V outlet, (1) USB-C PD port, and (1) USB-A port. You can quickly charge up to three devices at once, without the barriers of speed throttling. With the USB-C PD port (45W), this battery inverter can recharge devices from a fully depleted state to 80% capacity, up to 75% faster than conventional wall chargers (5W). The MILWAUKEE® M18™ TOP-OFF™ 175W Power Supply has an attached metal rafter hook that extends to hang it from carts, lumber, or other jobsite materials when worksurface space is limited. You can instantly set up a mobile workstation or keep electronics securely within eyeshot, rather than making frequent trips to a wall outlet. -
Out of stock
-
- Rugged 500-lb capacity so your heavy machines are now mobile
- Expands from 12 x 12 inches to 36 x 36, and can go up to 20 x 52 - all in one-inch increments
- Easy-to-use foot levers lock and unlock wheels for rock-solid stability
- 3-inch heavy-duty rubber wheels
- Low profile increases machine height by less than 1 inch so it won’t interfere with tool operation
- Maximum square size: 34 x 34 inches
-
- Adjust groove width to suit different panel thicknesses for rattle free plywood panels or solid wood raised panels
- Choose from a variety of material thicknesses (5/8 to 1-1/4")
- Add an optional cutter to your its to create glass panel or screen doors
- Add optional cutters to create double sided profiles in thicker stock material
- Imagine two router bits that create any door in 5/8 inch to 1-1/4 inch door thickness range, create "rattle free" flat panel doors, create any length long tenon construction and more
- Adjustable shims enable both a tight fit when using plywood panels and the ability to use thick panels ( from 5.5mm to 6.35mm ); The unique cutter geometry virtually eliminates tearout
- Top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile for blind tenons, through tenons, or bridle joints
-
-
Versatile and powerful 2.5A Keyless multi tool that cuts, sands, scrapes, grinds, rasps and polishes. Delivers high-performance sawing without a rotating blade. Compact, precision motor with superior performance. Side-mounted, removable auxiliary handle and ergonomic rubber-over-moulded grips reduce vibration and fatigue. Long power cable extends reach for optimal manoeuvrability. Quick-change, keyless accessory mounting. Dual sided LED worklights. Removable dust collar for connection to dust extraction system. Variable speed 11,000 - 21,000 oscillations per minute. Includes dust extraction collar, auxiliary handle, 25 x sanding sheets, 2 x scraper blades, 3 x saw blades, 1 x rasp sanding pad, 1 x carbide blade, 1 x hook and loop sanding pad, accessory holder and carry bag.
Finish Plastic What's in the box - 01 1 x TMUTL 2.5A Keyless Multi-Tool What's in the box - 02 1 x Round Carbide Blade What's in the box - 03 1 x Rasp Pad What's in the box - 04 1 x Hook & Loop Sanding Pad What's in the box - 05 25 x Sandpapers (P60, P80, P120, P180, & P240) What's in the box - 06 2 x Scraper Blades What's in the box - 07 3 x Saw Blades What's in the box - 08 1 x Dust extraction collar What's in the box - 09 1 x Auxiliary handle Material - Primary Construction Plastic No Load Speed 21,000opm Power 300W Product Height 11" Product Length 2 7/16" Product Weight 3.7lb Product Width 3 15/16" Sound Pressure LP 80dB Sound Power LW 91dB Variable Speed Yes What's in the box - 10 1 x Accessory holder What's in the box - 11 1 x Carry bag What's in the box - 12 1 x Instruction Manual Included Accessory - 10 1 x Accessory Holder Included Accessory - 09 1 x Auxiliary Handle Included Accessory - 11 1 x Carry Bag Included Accessory - 08 1 x Dust Extraction Collar Included Accessory - 04 1 x Hook & Loop Sanding Pad Included Accessory - 12 1 x Instruction Manual Included Accessory - 03 1 x Rasp Pad Included Accessory - 02 1 x Round Carbide Blade Included Accessory - 01 1 x TMUTL 300W Keyless Multi-Tool Included Accessory - 06 2 x Scraper Blades Included Accessory - 05 25 x Sandpapers (P60, P80, P120, P180, & P240) Included Accessory - 07 3 x Saw Blades Dust Extraction Yes -
Out of stock
- Create 1/4-Inch, 3/8-Inch and 1/2-Inch (3/8-Inch drill bushings and drill bit included) dowel holes on the end or face of your work piece
- Locations of dowels can be pre-set in 1/8-Inch increment
- Built in alignment slot
- Included are (5) 3/8-Inch drill guides, 3/8-Inch drill bit, 3/8-Inch stop collar, and 3/8-Inch indexing pin
- Maximum edge to center distance for dowel holes is 3-1/2-Inch
-
Out of stock
-
Original, patented, cyclone design stops up to 99.9% of fine dusts and bulk debris from clogging your vacuum's filter - eliminating suction loss while saving you time and money on expensive replacements! Deluxe kit comes with everything you need!- Upgrades any make/model shop vacuum with 1.5" to 2.5" hose fittings.
- Neutral-vane technology improves separation efficiency by 20%.
- All-clear components let you see how full the bin is from far away.
- Collapse-proof 5 gal. bucket won't fold under high vacuum pressures.
- Reinforced, quick-release, cyclone lid allows for fast and easy emptying.
- Caster Mounts widen the cyclone kit's base for a highly stable and portable setup.
- Highly flexible, wire-reinforced, polyurethane vacuum hose.
- Anti-static components significantly reduce the likelihood of static shocks.
- Optional tether kit connects the cyclone kit to your vacuum.
-
Durable MicroGrain Titanium Carbide teeth for razor-sharp cuts and long life. Perma-SHIELD® permanent coating prevents gumming and corrosion. Laser-cut thin kerf design gives fast & clean cuts. Laser-cut stabilizer vents give reduced vibration and precise cuts. Covered by Freud®'s Limited Lifetime Warranty. Freud® Part No. D0740A Dia. 7 1/4" No.Teeth 40 ATB Arbor: 5/8" Kerf: 0.590!0 -
- Milwaukee 4-pole frameless motor: features a robust design combined with rare-earth magnets for longer life, best-in-class 500 in. lbs. of torque and 0-450/0-1,800 RPM
- Single sleeve ratcheting chuck: all-metal 1/2 in. chuck optimizes grip strength and reduces slippage
- Built-in LED light: illuminates surfaces for faster, more efficient work
- 525 in. lbs. of peak torque
- 0-450/0-1,800 RPM
-
The M18™ Dual Bay Simultaneous Rapid Charger is capable of charging 2 battery packs simultaneously, over 3X faster than standard sequential chargers. The charger accepts all M18™ batteries. Equipped with REDLINK™ Intelligence, this charger communicates directly with M18™ batteries to monitor cell voltage, temperature and charge status to deliver the best combination of charge duration and pack lifespan. Simultaneously charging batteries at a rapid charge rate massively reduces downtime and maximizes productivity. Its compact size makes this an ideal charger to carry on and off the job, hang in a work trailer, or charge on the top shelf of a job box. -
Out of stock
Marking Gauges have been around for centuries but nothing has been designed to dial in your exact measurements, until now. Introducing the new JessEm Wood Sabre Marking Gauge. Once again JessEm has taken a basic tool and made it innovative by enabling a marking gauge to be preset to any pre-determined position.- Woodworking marking gauge
- Possibility to preset position to a pre-determined position
- micro adjustment availables
- High quality product.
- Made in Canada
-
Handy 820 W compact angle grinder with paddle switch and dead man function for light grinding and cut-off work. Details- Perfect ergonomics due to slim grip.
- Work with minimal fatigue due to low weight.
- Solid metal drive head for maximum robustness and service life. It rotates in 90° steps for excellent access in tight spots.
- Paddle switch with dead-man function.
-
Out of stock
-
Out of stock
This is Forrest's most popular blade. With this one all purpose blade you can RIP & CROSSCUT 1˝ - 2˝ ROCKHARDS and SOFTWOODS resulting in a smooth as sanded surface virtually without splinters. FEATURES: • 20° Face Hook for easy feed. • Our DOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings • Ends blade changing (one blade does rip, combo and crosscut). • Ends scratchy saw cuts • Ends second-step finishing • Ends cutting 1/16˝ oversize to allow for RESURFACING • Buy and Sharpen ONE blade instead of 3: (24T Rip, 50T Combination, 80T Crosscut) • Use 30T version if ripping mostly 2˝-3˝ Thick hardwoods • Side wobble is held to .001˝ - with other brands .004/.010 is common! • RAISE the blade for THICK woods. LOWER the blade for THIN woods and get perfect cuts every time. • Specially engineered clearances on the carbide teeth can totally eliminate side scoring. The result…no planing/jointing or sanding. In many cases a glue-line cut can be obtained, depending on the accuracy of the saw machine • Optional thin-kerf 3/32˝ width blades are available in 10˝ diameter for EASIER CUTTING with minimum power saw machines. They also remove 25% less material. -
Out of stock
-
Out of stock
With the HTC3000 adjustable mobile base, it's never been easier to move equipment around a crowded shop. This fully adjustable mobile base features side rails and corner pieces with holes spaced every inch to insure the perfect fit for your machine. Move bandsaws, table saws, sanders, drill presses, jointers, planers, and much more. You'll be able to open up space for more effective productivity, better organization and safety, and added convenience during cleanup. The base is sturdy and easy to assemble, plus it adjusts to fit virtually any large woodworking machine, forming squares from 14 by 14 inches to 36 by 36 inches and rectangles as big as 22 by 54 inches. Holes at 1-inch increments let you choose any shape in between, and 3-inch diameter wheels at all four corners make it easy to maneuver. Roll one tool in; roll another tool out. The large, industrial-grade foot-operated levers lock machines to the floor, and their increased lever length makes moving heavier machines a breeze. The base also features a durable powder-coated finish. The HTC-3000 has a maximum weight capacity of 700 pounds. All parts are included, and it's backed by a limited lifetime warranty -
Out of stock
-
- Set consists of 1 bit and 1 chisel
- Made of the highest quality tool steel
- High performance flute design geometry for superior chip extraction
-
Out of stock
H6070 1" x 30" Belt/5" Disc Combo Sander This sander pretty much does it all. The H6070 1" x 30" Belt/5" Disc Combination Benchtop Sander offers a 1" wide by 30" long belt sander and a 5" disc sander in one portable unit. Both the belt and disc sanding tables tilt 45° for added versatility and the removable belt platen and idler roller guard make contour sanding a breeze. Just read some of the positive reviews this sander gets: “It's amazing how much work this little machine has saved me as I go about making small bandsaw boxes and other projects.” Danielschweighauser72 “This machine is perfect for the needs of modeling. You will be very glad you spent your money for this sander.” paulpotteryartist “It is the prefect size when working with small parts.” insanityi Ideal for sanding intricate parts, contour sanding, and dry sharpening. Like all Grizzly benchtop machines, the H6070 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The H6070 manual was written by the U.S. based Grizzly Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the sander are available online and shipped from the Grizzly parts warehouse in Springfield, MO. SPECIFICATIONS: Motor: 1/3 HP, 110V, single-phase, 2.5A Sanding belt size: 1" x 30" Sanding belt speed: 3150 FPM Belt sander table size: 5-1/8" x 5-1/8" Belt sander table tilt: 0–45° Belt platen size: 1" x 3" Disc diameter: 5" Disc backing type: PSA Disc speed: 3450 RPM Disc sander table size: 4" x 7-5/16" Disc sander table tilt: 0–45° Dust ports: 1-3/4" and 1-13/16" Overall dimensions: 14" W x 10-3/4" D x 14-1/2" H Approximate shipping weight: 21 lbs. FEATURES: Dual dust ports Adjustable platen Universal positioning lock levers Manual belt tracking adjustment Takes standards 1" x 30" belts and 5" PSA discs Machined aluminum tables -
Out of stock
Features
- For use with stacked dado
- Constructed of 1/2" melamine-coated, solid phenolic resin
Specs
- Only for dual front hand wheel Unisaws
-
Out of stock
80-910
Bench Grinder Stand- Adjustable Height 28″ – 36″
- 2″ Diameter Steel post with cast iron base
- Storage for two grinding wheels
- Steel top measures 12″ x 9 1/4″ with 1/2″ wide slots for mounting grinders
-
- Upgrade any make and model shop vacuum into a two-stage dust control system with our patented cyclone separator. Removes over 99% of dust and debris from the airstream before it ever reaches the vacuum - virtually eliminating filter clogging and suction loss! Wall-mounted Bagger kit offers high waste capacity, visible fill level, and easy disposal. Kit includes anti-static cyclone separator, 3.9-gallon accumulation bin, wall mount, hardware, and five clear 4 mil bags.
-
Out of stock
The stationary G0787 4" x 36" Horizontal/Vertical Belt Sander with 6" Disc offers all the control and power you need for sanding smaller workpieces. Compact design is great for the smaller workshop. The 4" x 36" sanding belt tilts from 0°–90°, allowing both vertical and horizontal belt sanding. The back stop supports workpieces on the belt sander in any position. The 6-1/4" W x 9" L work table supports workpieces when using the 6" sanding disc. It tilts from 0°–45°. The belt tensioning lever provides tension to the sanding belt when pushed in and releases the tension when pulled out for changing belts. A tracking control knob allows the user to adjust the alignment of the sanding belt to the sanding bed. Additional features include a built-in an adjustable miter gauge, 2-1/2" dust port, and work table angle scale. Just read some of the positive reviews this sander gets:- "As in my review title, this belt sander is of very good quality and out punches like machines in every aspect." dianekayshick
- "Short and simple this is a great sander for DIYer or home hobbyist." charlespeckham67
- "Easy setup & nice dust collection. Quieter than I expected which is a bonus!" plersted
- Disc size: 6"
- Table size: 6-1/4" x 8-7/8"
- Cast iron base
- Single knob tracking
- 2-1/2" dust port for belt and disc
- Belt platen rotates 0–90°
- Approximate shipping weight: 39 lbs.
-
Freud is one of the few manufacturers of woodworking tools in the world that produces its own Micrograin Carbide for each tool application. 300 mm Blade Diameter, 30 Arbor, 96 Teeth, HiATB Grind, 3.2 Kerf (K), 2° Hook Angle, 2.2 Plate (P) Ideal For: To size bilaminated panels, with perfect finishing on both sides without the employment of the scoring sawblade. Application: Sawblades for cutting wood panels, plastic materials and non-ferrous metals on table saw or miter saw. -
Double dowel drilling with 710W motor and 32mm spacing. Simplifies furniture and shelving construction. All-metal mechanism and gearing for long life. 0-90° angle adjustable fence. 0-38mm fast setting of drill depth. Features:- Precision rack and pinion system allows accurate adjustment for material thickness
-
-
Out of stock
-
Out of stock
-
Out of stock Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbors offers a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blade runs very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and re-straightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory.
-
This bit set creates top quality strong, tight-fitting glass panel door joints with ease and accuracy. Extra strong rail and stile joints with a unique lock in the stile and rail joint, plus significantly more gluing surface. No other set on the market provides this feature.Use with Freud's GM005 glass panel molding spline ( sold separately ). 2" diameter, 1-3/32" carbide height, 1/2" shank, 3-1/8" overall length. -
This plus size Tool Table accomodates larger bench top machines. The particle-board table has a butcher block finish and measures 14" x 40" x 1-1/4" thick. The wide A-frame stand has a 700 lbs. capacity and measures 33" high. Bottom measures 47. 5" x 25. 25". Includes stand frame and top. Please note: This product is not recommended for use with casters.
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com