Shop – Page 113 – CT Power Tools

Laguna SUPMX-91067 13 Combo Brush/Drum Sander, 110V

$4,459.00
The 13" Combination Brush/Drum is the answer to your production bottleneck. Developed with mouldings in mind, this versatile sander can tackle every step in your finishing process, from sanding raw wood to sanding in between coats of stain or primer. Read about other applications below. This model features a 1-3/4 HP motor, and can handle stock up to 4" thick, or as thin as 1/32". It can also be equipped with an optional sanding drum for surface sanding.
Raw Wood Sanding | White Wood Sanding

Break sharp edges

Open grain for even finish absorption

Blend out minor defects

Sealer Sanding | Primer Sanding | Scuff Sanding

Removes raised fibers and grain (denib/defuzz)

Degloss previously finished wood

Clean reclaimed wood

Wire Brushing

Distress (weathered/Southwest finish)

Pull out soft grain to create textured surface

Sanding Capacity: Maximum Width (in): 13 Minimum Length (in): 9 Maximum Thickness (in): 4, varies with drum/brush style Minimum Thickness (in): 1/32*

Dimensions (in): 35L x 42W x 44H

Drum (in): 5 x 13 extruded aluminum.

Brush (in): 6-8 typical diameter.

Speed: ranged variable RPM, 400-1200

Dust Hood: 1- 4" port, hinged at back, 600 CFM min. recommended

Conveyor Motor: 43 in.-lb. torque, ranged variable, 0-10 FPM

Drive Motor (TEFC): 1-3/4 HP

Power Requirements: 110 Volt, 20 amp service

Shipping Weight (lbs): 300 (approx., varies based on how equipped)
Add to cart Details
Out of stock

Powermatic 1792012K Model PM2000 5 HP 1-Phase Table Saw with 30-Inch Accu-Fence System

$4,495.17

The PM2000 table saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration. The cast iron tables are oversized, and the push button arbor lock is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick-release riving knife design helps reduce the chance of kickback. The blade tilt scale has adjustable angle indicators for repetitive bevel cuts. Built-in retractable omni-directional caster system mobilizes your table saw. A wide stance, heavy-duty trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive belt system results in quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up. The saw has a proprietary safety switch with magnetic interlock, and the stop button can be knee activated.

Details
W1754H Shop Fox 20″ Helical Planer with Spiral Cutter Head

$4,499.00

Add to cart Details
Kreg DK1100TP Benchtop Single-Spindle Pneumatic Pocket-Hole Machine

$4,499.00

The DK1100 series of machines are the standard in the industry for drilling a single pocket hole at a time. We’ve packed a ton of functional features into these machines that set them apart from the competition. Choose from electric- or pneumatic-powered, freestanding or bench-mounted to fit the way you build. Each DK1100 machine is built with industrial-grade motors that provide the power to run day after day – quickly, quietly, and reliably – in even the most high-production environments. For most shops, this translates into previously unheard of productivity and efficiency.This model is identical to the DK1100 FP, but comes in a much smaller frame. It features a table height of 8", making it easy to build into your workbench or relocate from time to time. Requires a compressor able to produce 8 CFM at 120 PSI (50% duty cycle). Convenient Swing Stops Quickly position two pocket holes across rails of various widths by placing it against one stop, drilling the hole, and then repeating with the rail against the other stop. For drilling pocket holes in panels, the stops simply swing out of the way. Adjustable Fence Adjustments couldn’t be easier, as the fence adjusts directly from the top side of the machine to let you center a screw in 1/2"- to 1 1/2"-thick material. The clamp hold-down also adjusts to allow materials up to 4"-thick to be drilled. Quick Drill Bit Changes Changing drill bits is a quick and easy process. Simply loosen the collet with the provided Allen wrench, replace with a new bit, and you are back in production in less than 60 seconds. Long-Lasting Motors The industrial-grade motors used in Kreg machines are built for long-lasting service. Kreg machines are designed to minimize stress on moving parts, greatly reducing the likelihood of failure.

Add to cart Details
Delta 36-L552 5 HP Unisaw, 52-Inch Fence

$4,499.99
Delta’s 36-L552 left tilt cabinet saw is ideal for woodworking, cabinet making, and boat building. It features up-front dual-crank controls with locking cams, speedometer style scales and a 52 inch Biesemeyer fence. The 5HP 220V motor cuts hardwoods and engineered products like MDF and melamine. The riving knife enables tool-less adjustment for through- and non-through cuts including grooves for shelves and picture frames as well as dadoes, rabbets, and cheek cuts for furniture. The single-cast trunion provides increased vibration control. Largest throat plate in category eases blade changes. Storage under the table board is convenient and expandable. Bi-level dust extraction improves dust collection. The 36-L500 is one of several pieces that make the 36-L552.
- Single-cast trunnion system results in incredible vibration control providing continuous smooth operation and dependable accuracy
- Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
- The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4 degree
- The Cabinet Construction consists of a large cast-iron base providing stability and solid footing; True american marathon motor provides added power and is available in both 3 and 5 hp
Add to cart Details
Out of stock

Powermatic 1791213 15HH 3 HP 15-Inch Planer with 230-Volt 1 Phase Byrd Shelix Helical Cutterhead

$4,499.99
The Byrd cutterhead is made from stress-proof steel for unrivaled durability, and it is ultra-efficient thanks to 74 carbide inserts that are arranged in spiral-shaped rows. These inserts have a four-inch radius ground into them and are mounted to approach your workpiece at a 14-degree angle, so you'll get a true shear cut every time you use it.
- Byrd helical cutterhead with 98 four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems.
- Powerful 3HP TEFC motor controlled by magnetic switch for safety
- Three V-belts transfer maximum power to the cutterhead.
- Serrated steel infeed roller and smooth steel outfeed roller allow for 1/8-Inch maximum depth of cut and trouble-free operation.
- Large cast iron handwheel positions table quickly and easily.
Details

Powermatic PJ-882HH Jointer, 2HP 1PH 230V 1610082

$4,519.99

Number of Knives	54
Helical Knife Size (L x W x T) (In.)	15 x 15 x 2.5
Cutterhead Diameter (In.)	3-1/16
Cutterhead Speed (RPM)	7,000
Cutting Capacity (W x D) (In.)	8 x 1/2

Table Size (L x W) (In.)	82 x 8
Table Height from Floor (In.)	31-5/16
Infeed Table Length (In.)	44
Outfeed Table Length (In.)	38
Rabbeting Capacity (In.)	NA
Fence Size (L x H) (In.)	44-3/4 x 38-3/16
Fence Tilt (Deg.)	45 Forward, 45 Backward
Fence Positive Stops (Deg.)	45, 90, -45
Dust Collection Minimum CFM Required (CFM)	450
Dust Port Outside Diameter (In.)	4
Motor Power (HP)	2
Motor Phase	1
Motor Voltage (V.)	230 only
Motor Current (Amps)	9
Recommended Circuit Size (Amps.)	20

Details

Grizzly Industrial G0606X1 12″ 7-1/2 HP 3-Phase Extreme Table Saw

$4,550.00
This Extreme Table Saw is ideally suited to handling large panels without blinking an eye. A right-hand and rear-mounted extension table supports the widest panels before, during, and after the cut, and the large rail-mounted switch control won't get lost under the panel. Other features include ample storage shelves, a user friendly blade guard, a riving knife, a digital readout for blade angle and an efficient dust management system that includes an internal dust port and sloped cabinet floor that directs saw dust into the 4" dust port. Enjoy all of the innovative features this big capacity saw has to offer. CSA certified meeting CSA C22.2 #71.2-08, CSA C22.2 #105-1953, and UL 987 standards. Made in an ISO 9001 Factory. SPECIFICATIONS:
- Motor: 7-1/2 HP, 220V/440V*, 3-phase
- Amps 19.5/10
- Blade tilt: Left, 45 degrees
- Table height from floor: 35-3/4"
- Table size with extension 69-1/2" x 78-3/4"
- Arbor speed: 3600 RPM
- Arbor size: 1"
- Maximum dado width: 3/4"
- Maximum depth of cut @ 90°: 4"
- Maximum depth cut @ 45°: 2-3/4"
- Maximum rip capacity: 52"
- Distance from front of table to blade at maximum blade height: 11-1/2"
- Distance from front of table to center of blade: 17-1/4"
- Overall dimensions: 91-1/2" W x 79-1/2" D x 42-1/2" H
- Approximate shipping weight: 861 lbs.FEATURES:
- Precision-ground cast iron table
- Cast iron trunnions
- 3/8" x 3/4" T-slots & miter gauge
- 4" dust port
- Smooth and quiet Poly-V serpentine belt power transfer
- Steel cabinet
- Hinged motor cover
- Right hand and rear extension tables
- Magnetic switch with thermal overload protection and lock-out padlock
- Digital readout for bevel angle
- Quick-change between riving knife and splitter guard
- Includes 12" x 60T blade and push stick*If you require 440 volt operation, Grizzly must convert your machine at the time of purchase to maintain the machine's warranty. A $250 fee will be added to your order. Please allow extra shipping time for the conversion. If you need more information please contact technical service
Add to cart Details
Out of stock

Supermax SUPMX-91067 13 Combo Brush/Drum Sander, 110V (includes 1 brush)

$4,599.00
The 13" Combination Brush/Drum is the answer to your production bottleneck. Developed with mouldings in mind, this versatile sander can tackle every step in your finishing process, from sanding raw wood to sanding in between coats of stain or primer. Read about other applications below. This model features a 1-3/4 HP motor, and can handle stock up to 4" thick, or as thin as 1/32". It can also be equipped with an optional sanding drum for surface sanding.
Raw Wood Sanding | White Wood Sanding

Break sharp edges

Open grain for even finish absorption

Blend out minor defects

Sealer Sanding | Primer Sanding | Scuff Sanding

Removes raised fibers and grain (denib/defuzz)

Degloss previously finished wood

Clean reclaimed wood

Wire Brushing

Distress (weathered/Southwest finish)

Pull out soft grain to create textured surface
Details
Out of stock

Powermatic 1280100C Model PM2700 3 HP 1-Phase Shaper with DRO and Casters

$4,599.99

This new PM2700 Shaper offers more features to you than any other shaper in the same class. The extra large 30" x 40" precision ground cast iron table includes a heavy duty miter gauge with an aluminum extruded support. The built-in, omni-directional caster system (patent pending) is retractable into the base. A quick-release lever allows fast speed and belt changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it in and then use the precision micro adjustments on each side of the cutter to dial in exactly the position you need. Adding to the precision of this machine is a digital readout for the spindle height. This allows making adjustments to within .001" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.

Details
Shop Fox W1811 10-Inch 5 HP Sliding Table Saw

$4,599.99

Perfect for cutting wide panels in limited shop space, this 10" Sliding Table Saw features a scoring blade to eliminate cross grain tear-out, a 63" long crosscut capacity, telescoping crosscut fence with two rock-solid flip stops, fully-adjustable miter fence with its own flip stop, two-position extruded-aluminum rip fence, riving knife, and large blade guard with integral dust port. This 10" Sliding Table Saw makes quick work of all standard plywood panels. Accepts 10" saw blades with 5/8" arbor bores or dado blades up to 13/16" wide. Certified to CSA standards!

Add to cart Details
Oneida 3HP Dust Gorilla Pro 35 Gal. SMART Dust Collector XGK030035

$4,599.99

Heavy-gauge steel cyclone body, fully seam-welded with iconic yellow powder coat finish. SMART Boost technology doubles the airflow through smaller ports and long ducting runs - ideal for CNC machines! Includes 35 gallon bin, stand, and RF remote control.

Add to cart Details