-
-
The DELTA 31-819 120 Grit Pre-Cut Sanding Strips is designed specifically for the DELTA 31-250 Wide Drum Sander. Installation is simple thanks to the cloth-backed strips being pre-cut for the 5-inch diameter and 18-inches wide drum. The strips are coated with aluminum oxide abrasives for long lasting, effective sanding. The 120 grit sanding strips leave a fine finish. Includes four strips. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]- Pre-cut sanding strips for DELTA 31-250 Wide Drum Sander
- Cloth-backed strips
- Aluminum oxide abrasive for long lasting sanding effectiveness
- 120 grit leaves a finer finish
- Four strips included
-
Diablo's general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades, or make quality crosscuts in solid wood or plywood. Great for both sliding and “chop” style miter saws as well as table saws. -
DELTA 31-817 80 Grit Pre-Cut Sanding Strips for Models 31-250, 31-255 Wide Drum Sanders. Pre-cut to fit the 5-inch diameter by 18-inch wide drums of the 31-250 and 31-255 wide drum sanders, these cloth-backed strips come four to a pack. Coated with aluminum oxide abrasives for long life and smooth finish. Includes four cloth-backed sanding strips.
-
This 4-pack of DELTA 31-818 100 Grit Pre-Cut Sanding Strips are designed to work with the DELTA 31-250 Wide Drum Sander. These cloth-backed strips come precut (5 x 18 inches) to the proper length and come coated with aluminum oxide abrasives for long life and smooth finish. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]
- 4-pack of cloth-backed sanding strips
- Designed to work with the Delta 31-250 and 31-255 Wide Drum Sanders
- Pre-cut to the proper length
- Aluminum oxide abrasives for long life and a smooth finish
- 100 grit
-
Out of stock
The BIESEMEYER Thin Kerf Riving Knife works great with your Delta Table saw. It helps to prevent burring on the work. There is one knife per package. [fusion_checklist icon="check" iconcolor="#aaaaaa" circle="no"]- Accessory riving knife for thin kerf blades
- 2.2mm thick riving knife
- For blades with minimum 2.4mm kerf and 1.8mm max body thickness
- Front of cabinet adjustability with no need to change for non-through cuts
- You can also add the anti-kickback pawls and guard to the riving knife without tools.
-
MAGSWITCH VERTICAL FEATHERBOARD PRO
–
81101302
The Pro Vertical Featherboard is a table saw safety attachment which pushes the workpiece down against the table during feeding to prevent ride-up and kickback. Attach it to ferrous Biesemeyer-style table saw fences between the low-friction guide faces and adjust the feathers vertically to match the height of the workpiece. It can be paired with a second Pro Vertical featherboard for downward pressure on a work piece before and after the saw blade. -
Diablo’s new Ultimate Polished Finish saw blades feature Axial Shear Face Grind (ASFG) that cleanly shears through materials for superior quality finishes on fine molding, hardwoods, softwoods, veneered plywood, melamine and more. Also featuring Double-Side Grind tooth geometry, an incredible 200 additional grinds, this blade produces precise, polished-like cuts equal to that of 220-grit sandpaper or higher. Diablo’s proprietary TiCo Hi-Density Carbide is designed specifically to deliver extreme durability and 5X longer life on materials requiring polished-like finishes. Unlike other blades on the market, Diablo’s Ultimate Polished Finish saw blades have a laser-cut, ultra-thin kerf blade design for fast, effortless cuts on corded or cordless saws making this the go-to blade when working at a permanent location or at a portable jobsite. Diablo’s new Ultimate Polished Finish saw blades are REDefining cutting by introducing radical technology to maximize performance and extend cutting life, saving the PRO both time and money when completing their projects. -
-
-
-
Out of stock
-
Out of stock
-
Out of stock
-
-
Bora marking tools combine beauty and reliability. This three-piece set includes a Marking Gauge, 7-1/2" Sliding Bevel and 6" Try Square, each featuring European beech construction with brass accents and designed to accurately mark your material prior to sawing, chiseling, or cutting. -
Magswitch Pro Table Featherboard – 8110328 does the job of 3 featherboards and has a greater holding power and safety, anywhere you need it. It adds to your safety and quality of cut. Features- Accepts the Magswitch Vertical Attachment with Risers for holding down as well as in to the fence.
- Acts as the base of an adjustable stackable featherboard for tall pieces.
- Features two powerful 30mm Magswitch magnets.
- Versatile — no miter slot limitation.
- Fast, accurate positioning.
- Cut wider material.
- Can be place beyond the miter slot.
- Provides powerful control.
- Easy on/off operation.
-
Out of stock
Features:- 3/8" thick phenolic with durable friction-free coating
- Convenient center-hole bushing used to align the router so it is centered in the bit hole
- Plate center-hole is machined to accept a 3-1/2" raised panel bit
- Two additional Tab-Loc insert rings to reduce the size of the bit opening
- Simple step-by-step instructions make accurately drilling and mounting any router easy
-
Kiln dried beautiful Ash slab. Milled flat. Perfect table top or other use!Surfaced one side w/ natural live edge. Visible knots..2 placesApprox. Size: 22" wide x 110" long x 1.5" thickShipped via UPS or free store pick up in Enfield, CT 06082Have another size in mind? We accept custom size requests. -
Kiln dried beautiful Padauk Milled flat.Surfaced 4 sides. -
Out of stock
- PERFORMANCE : Up to 33 minutes of continuous use with a 18V 5.0Ah LXT® battery (battery not included)
- CONVENIENCE : Bagless 2-stage cloth filtration system allows for easier cleaning and quicker debris disposal
- VERSATILITY : Redesigned floor nozzle for improved maneuverability and debris collection
- COMFORT : Weighs only 2.7 lbs. with battery (battery not included) for reduced operator fatigue
- INCLUDES : Extension, floor nozzle, crevice tool, filter, cloth filter (battery and charger not included)
-
-
-
Whether you work in a small shop or simply need to keep your workspace flexible, the Bora PM-900 Workbench Caster Kit is the ideal solution to keep your shop mobile.- All-swivel wheels to easily move the bench around small workshops and into tight spaces
- Non-marking three-inch rubberized wheels provide a smooth roll over cords and uneven floors
- Each wheel has 155-lb. weigh capacity — up to 50 lbs. more per wheel than most other caster kits
- Supports up to 620 lbs. total
- Heavy-duty foot lever mechanism from Bora’s popular mobile base lineup delivers proven performance
- Bracket designs can be fitted to virtually any bench
- Easy to install — make one quick measurement to mark and install the kit with included hardware
-
The Magswitch MagJig 150 secures your fixture into place. Rotate the knob to turn On/Off 150 pounds of magnetic hold force. Simply drill a hole in a fixture and place the MagJig 150 in to use for downward pressure clamping. Features- Use in your custom jigs and fixtures by drilling a 40 mm hole using a Forstner bit into standard ¾” stock.
- Drill as many holes as you want for as much strength and flexibility as you need by simply dropping in MagJigs. We recommend use of two per fixture to avoid pivot.
-
Create fences, assembly jigs, cutting fixtures, blade guards, work supports or anything that makes your work faster, safer and easier.
- Excellent for woodworking, welding and fabrication.
- Designed with screw holes to add more security in a fixture.
- Holds flat and round surfaces of steel.
- Magnet turns completely On and Off.
- Magnet stays clean.
- Does not use an electrical power source.
- You are purchasing two switches.
-
Out of stock
If used with a 5 gallon bucket, the bucket must be a minimum of 90 mils thick (0.09") or else it may collapse under vacuum pressure. Big box store buckets are not thick enough for use with the Dust Deputy.
* Not for use in positive-pressure applications i.e. when connected to a blower instead of a vacuum. A container with a locking lid (such as our 10-gallon kit) is recommended instead.
-
-
- Compatible with Milwaukee 12V-18V M12 M18 48-11-2402, 48-11-2440, 48-11-2411, 48-11-1815, 48-11-1828 , 48-11-1820, 48-11-1840.
- Indicator lights that show the status as batteries are charged and maintained.
- Overload protection protects from damaged battery cells, Durable and cooling system has the function of stable heat dissipation
- Brand New, Lithium-Ion charger, Support fast charging
-
-
Kiln dried beautiful Padauk Milled flat.Surfaced 4 sides. -
The FISCH Premium Hollow Mortise Chisel and Bit Set is used for drilling and mortising square holes in soft and hard woods. This premium set is manufactured from special steel and fits all major mortising machines and drill press attachments. -
Out of stock
-
Freud's® best choice for cabinet makers. I especially like these blades because they leave a velvety finish with little to no need for sanding and are ideal for crosscutting finished oak, pine, melamine, veneer plywood and delicate moulding.Specifications:Durable MicroGrain Titanium Carbide teeth for razor-sharp cuts and long life.Perma-SHIELD® permanent coating prevents gumming and corrosion.Laser-cut thin kerf design gives fast & clean cuts. Laser-cut stabilizer vents give reduced vibration and precise cuts.Covered by Freud®'s Limited Lifetime Warranty.Freud® Part No. D1296NDia: 12"No.Teeth 96TCGHook Angle: -5 degreesArbor: 1"Kerf: 0.091Plate: 0.071 -
-
- Converts 12-inch planer for dust collection
- 4-inch Outlet
- Fits most 4-inch dust collector hoses
- Provides for a cleaner and safer work area
- Measures 15 by 10 by 7 inches; weighs 2.7 pounds
-
Out of stock
Adjustable Feet Lathe for 70-3040
-
Out of stock
-
MagJig 235 secures your fixture into place. Rotate the knob to turn On/Off 235 pounds of magnetic hold force. Simply drill a hole in a fixture and place the MagJig 235 in to use for downward pressure clamping. Features- Use in your custom jigs and fixtures by drilling a 56 mm hole using a Forstner bit into standard ¾” stock.
- Drill as many holes as you want for as much strength and flexibility as you need by simply dropping in MagJigs. We recommend use of two per fixture to avoid pivot.
-
Create fences, assembly jigs, cutting fixtures, blade guards, work supports or anything that makes your work faster, safer and easier.
- Excellent for woodworking, welding and fabrication.
- Designed with screw holes to add more security in a fixture.
- Holds flat and round surfaces of steel.
- Magnet turns completely On and Off.
- Magnet stays clean.
- Does not use an electrical power source.
Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com