Shop

Uncategorized (255)
3M (25)
Bessey (19)
Bora (12)
Delta (75)
Forming & Shaping (1)
Freud (45)
Generac (1)
Generator (1)
Granberg Alaskan Mills (1)
Grex (5)
Lathes (1)
Makita (7)
Measuring Hand Tools (8)
Milwaukee (3)
Oneida (29)
Planers (1)
Power & Hand Tools (1)
Rikon (40)
Sawzall (3)
Senco (1)
Sheet Metal Brakes, Rolls & Shears (19)
South Bend (12)
Starret (1)
Table Saw (5)
Table Saws (1)
Tapes and Treads (1)
Tormek (8)
Triton (14)
Vogelzang (1)
Woodstock (2)
Abrasives (86)
Accessories (102)
Brands (794)
Featured Items (39)
Hand Tools (54)
Hardware (2)
Measuring Tools (78)
Paint / Stains / Coatings (7)
Power Tools (224)
Wood (105)
Out of stock

Purple Heart Exotic Wood Slab 22″ x 87″ x 1″ (Copy)

$698.95

Kiln dried beautiful Purple Heart slab. Milled perfectly flat. Perfect cutting board, table top or other use!

Surfaced two sides w/ natural live edge

Size: 22" wide x87" long x 1" thick

Contact us for a shipping estimate.

Details
Out of stock

Maglite LED 2 Cell AAA Pen Flashlight with Batteries and Steel Clip

Details
Out of stock

3M 15301 8″ x 50Yd 60 Grit Resinite Floor Surfacing Roll

Details
Maple (soft) Square Dowel 7/8″ x30″

$14.00

The term “soft maple” does not refer to any specific species of maple, but rather, it’s a broad term which includes several different species of maple. The term “soft maple” is merely used to differentiate these species from hard maple. Resembles Hard Maple being closed-grained but much softer. Easily worked. Accepts finish and paint well.

Stock is cut to size from quality, kiln-dried stock. Dimensions are +- 1/8" grain runs with the longest dimension.
You are purchasing one square blank 7/8" x 30".

Add to cart Details
Purple Heart Square Dowel 7/8″ x30″

$24.00

Central and South America purpleheart (peltogyne). Medium to hard wood with tight, fairly straight grain with moderate to coarse texture. Bright purple when cut, darkens to brownish purple with exposure. Purpleheart is a very strong wood, machines well with sharp tools. Turns and finishes well.

Uses for purpleheart include: boat-building, flooring, furniture, heavy construction, and a variety of specialty wood items. Pens, knife scales, bottle stoppers.

Stock is cut to size from quality, kiln-dried stock. Dimensions are +- 1/8" grain runs with the longest dimension.
You are purchasing one square blank 7/8" x 30".

Add to cart Details
Delta 78-130T2 BIESEMEYER 30 Inch Commercial Rail System

$399.00

The Beisemeyer 78-130 table saw guide rail features a built-in tape front rail, back rail, guide tube, hardware available with fence, fence sold separateley. Capacity, 30" Right and 12" Left. The Beisemeyer 78-130 delta gray table saw guide rail is specifically for use with table saw and requires fence and table board with legs. Length of guide is 30 Inches. Scale Calibration 1/16. Features construction Steel Tubing.

Add to cart Details
Makita XMT04ZB 18V LXT StarlockMax Li-Ion Sub-Compact Multi-Tool Bare Tool

$245.90

Trades of all kinds utilize oscillating multi-tools for a range of applications. The 18V LXT® Sub-Compact Brushless Multi-Tool (XMT04ZB, tool only) delivers corded speed and power without the cord. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class cordless multi-tool.

The multi-tool features variable speed control dial (10,000 – 20,000 OPM) with soft-start so users can match the speed to the application. It’s equipped with Anti-Vibration Technology (AVT®), an internal counterbalance system engineered to reduce vibration. It has a 3.6-degree oscillation angle for faster, more aggressive cutting and sanding. The small diameter barrel grip provides improved handling and a large on/off slide switch with lock-on button provides convenience.

The XMT04ZB features the StarlockMax® System, a tool-less clamp system for faster accessory installation. When used with Starlock® Oscillating Multi‑Tool Accessories, this oscillating multi-tool is ideal for cutting, sanding, scraping, grout removal, and many more applications.

The LXT® System is the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita’s purpose-built motors, battery technology, and enhanced communications work together to deliver maximum performance and efficiency. The LXT System offers cordless tools, equipment, and accessories for every trade.

For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. Look for Makita® 18V LXT® Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.

Add to cart Details
Makita GAG10Z 40V MAX XGT 7″ / 9″ Li-Ion Paddle Switch Angle Grinder -Bare Tool

$349.00

The 40V max XGT® Brushless Cordless 9” Paddle Switch Angle Grinder with Electric Brake and AWS® (GAG10Z, tool only) delivers corded grinding performance without the cord for the most demanding applications. It's powered by a Makita-built brushless motor which delivers the power and performance needed for heavy-load applications. The GAG10Z is ideal for grinding and cutting a wide range of materials including tile, concrete, pipe, conduit, and more.

An electric current limiter helps protect the motor from overload in high-torque applications. Additional features include an electric brake that stops the grinding or cut-off wheel in 2 seconds or less and Active Feedback-sensing Technology (AFT®) that turns the motor off if rotation of the wheel is forced to a stop.

A paddle switch with no lock-on is convenient. A quick guard rotation provides tool-less adjustments for increased productivity. Anti-restart protection is engineered to prevent motor start-up when the battery is inserted while the switch is locked on. A soft start suppresses start-up reaction and provides smooth start-ups.

Wire mesh intake covers are engineered to prevent debris from entering the motor. The GAG10Z is also equipped with Makita's Extreme Protection Technology (XPT™), a series of protective seals inside the tool. XPT is designed to improve a tool’s operation in harsh conditions by channeling water and dust from key internal components. Reinforced metal gear housing provides additional durability on the job site.

XGT is a system of equipment, tools, batteries and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

Auto-Start Wireless System (AWS®) uses Bluetooth® technology for wireless power-on and power-off communication between the equipped tool and dust extractor. Once connected via AWS, the AWS-equipped dust extractor will automatically power on or off when the AWS-equipped cordless tool starts or stops, running only when the tool is in use. This increases productivity on a single charge and reduces continuous noise at the job or work site.

Add to cart Details
Makita 18V LXT Brushless Couple Shaft Power Head Kit XUX02SM1X6

$588.00

With zero emissions, lower noise, and maximum versatility, the 18V LXT® Couple Shaft Power Head Kit with a 13" String Trimmer, 10" Pole Saw, 20" Articulating Hedge Trimmer, and Blower Attachments (XUX02SM1X6) is a welcome solution for a range of trimming, cutting, and clean-up applications. It’s powered by one Makita 18V LXT® Battery for performance and run time without the hassles of gas and without leaving the 18V LXT® battery platform. The Power Head features a lever-style lock system for quick tool-less installation and replacement of attachments.

The XUX02SM1X6 kit includes the 13" String Trimmer Couple Shaft Attachment (EM409MP) featuring the rapid loading bump and feed trimmer head, the 10" Pole Saw Couple Shaft Attachment (EY402MP), which provides a seven foot fixed length for trimming hard to reach branches, the 20" Articulating Hedge Trimmer Couple Shaft Attachment (EN402MP) which features 13 angle settings with 135° of working range for efficient trimming of overhead and low-lying hedges, as well as the Blower Couple Shaft Attachment (UB401MP) which features an axial fan design that provides high blowing force power needed for quick clean-ups

The Makita-built brushless motor delivers up to 9,700 RPM. The motor is electronically controlled to optimize battery energy use for up to 50% longer run time per battery charge than similar non-brushless tools. The brushless motor runs cooler and more efficiently for longer life and electronic controls efficiently use battery energy to match the changing demands of the application for increased power and speed when needed.

It features Makita Extreme Protection Technology (XPT™). XPT™ is a protective seal inside the tool. It is designed to improve a tool’s operation in harsh conditions by channeling water and dust from key internal components.

It’s part of Makita’s expanding 18V LXT® System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita® 18V LXT® Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita® 18V LXT® Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.

Add to cart Details
Makita 40V max X2 (80V) XGT Brushless 14in Power Cutter Kit SKU# GEC01PL4

$2,699.00

The 80V max (40V max X2) XGT® Brushless 14" Power Cutter with AFT® and Electric Brake (GEC01PL4) has the power to cut through various masonry and metal materials with all the benefits and convenience of cordless operation. The 14” wheel diameter allows for single pass cuts up to 5” deep in various masonry and metal materials. Model GEC01PL4 is a kit and includes four 40V max XGT® 8.0Ah Batteries (BL4080F) and an efficient 40V max XGT Dual Port Rapid Optimum Charger (DC40RB).

The benefits of a cordless power cutter over gas include no oil or mixing, lower noise, less maintenance, zero emissions, and no pull starts. This means instant starts, cost savings, and the ability to use the power cutter indoors.

It has an integrated water delivery system with a water flow adjustment knob that continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications

The belt-drive design provides smoother operation with lower vibration. The GEC01 has a Makita-built brushless motor combined with two 40V max XGT® batteries to deliver the performance equivalent to a 75.6cc gas-powered model. The brushless motor runs cooler and more efficiently for longer life and can deliver up to 5,300 RPM.

The GEC01 is engineered with Active Feedback-Sensing Technology (AFT®), which electronically turns off the motor if the rotation of the cutting wheel is suddenly forced to stop. It also features Extreme Protection Technology (XPT™), which is engineered for improved dust and water resistance for operation in harsh conditions.

Convenience features include a built-in L.E.D. light, large spindle lock button for easier wheel changes when wearing gloves, and a lock-off power switch which requires two actions to start the Power Cutter. It also features soft start, which suppresses start-up reaction for smoother start-ups and longer gear life, and overload protection designed to protect the motor from burnout in abnormally high torque situations.

Other features include integrated all aluminum wheels that help reduce fatigue and maintain accuracy in floor cutting applications, an adjustable blade guard which facilitates cutting in low or upper wall zones, and a rubberized front handle that can be held in multiple positions for increased comfort at various cutting orientations.

XGT® is a system of equipment, tools, batteries, and chargers utilizing 40V max lithium-ion batteries. XGT® is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT® is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

Add to cart Details
Makita 40V max X2 (80V) XGT Brushless 14in Power Cutter Kit GEC01PL

$2,149.00

The 80V max (40V max X2) XGT® Brushless 14" Power Cutter with AFT® and Electric Brake (GEC01PL) has the power to cut through various masonry and metal materials with all the benefits and convenience of cordless operation. The 14” wheel diameter allows for single pass cuts up to 5” deep in various masonry and metal materials. Model GEC01PL is a kit and includes two 40V max XGT® 8.0Ah Batteries (BL4080F) and an efficient 40V max XGT Dual Port Rapid Optimum Charger (DC40RB).

The benefits of a cordless power cutter over gas include no oil or mixing, lower noise, less maintenance, zero emissions, and no pull starts. This means instant starts, cost savings, and the ability to use the power cutter indoors.

It has an integrated water delivery system with a water flow adjustment knob that continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications.

The belt-drive design provides smoother operation with lower vibration. The GEC01 has a Makita-built brushless motor combined with two 40V max XGT® batteries to deliver the performance equivalent to a 75.6cc gas-powered model. The brushless motor runs cooler and more efficiently for longer life and can deliver up to 5,300 RPM.

The GEC01 is engineered with Active Feedback-Sensing Technology (AFT®), which electronically turns off the motor if the rotation of the cutting wheel is suddenly forced to stop. It also features Extreme Protection Technology (XPT™), which is engineered for improved dust and water resistance for operation in harsh conditions.

Convenience features include a built-in L.E.D. light, large spindle lock button for easier wheel changes when wearing gloves, and a lock-off power switch which requires two actions to start the Power Cutter. It also features soft start, which suppresses start-up reaction for smoother start-ups and longer gear life, and overload protection designed to protect the motor from burnout in abnormally high torque situations.

Other features include integrated all aluminum wheels that help reduce fatigue and maintain accuracy in floor cutting applications, an adjustable blade guard which facilitates cutting in low or upper wall zones, and a rubberized front handle that can be held in multiple positions for increased comfort at various cutting orientations.

XGT® is a system of equipment, tools, batteries, and chargers utilizing 40 max lithium-ion batteries. XGT® is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT® is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

Add to cart Details
GWH01Z Makita XGT Brushless 1,300 PSI 1.5 GPM Pressure Washer

$699.00

The 40V max XGT® 1300 PSI 1.5 GPM Pressure Washer (GWH01Z Tool Only) is ideal for cleaning patio furniture, gardening tools, automotive detailing, windows, decks, porches, fences, driveways, and much more.

The High Pressure Washer features three power levels for power and runtime management. It features 1300 PSI and 1.5 GPM on High. There is a self-priming feature and siphoning hose that allows for remote cleaning from most fresh water sources. It features an auto-switching two-bay battery system for two times more run time.

Convenience features include a water-resistant battery enclosure for added protection. It also features a telescoping handle and 5.5” wheels for easy transportation. Convenient on-board accessory storage and tool-less attachment adjustment enable smooth transitions between tasks.

XGT® is a system of equipment, tools, batteries, and chargers utilizing 40V max lithium-ion batteries. XGT® is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT® is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart, and outlast the rest.

Add to cart Details