- Powerful 10-amp motor
- Helical cutterhead for a smooth cut
- All steel construction for durability
- Carbide insert knives can be rotated to expose a fresh edge
- Large 8-3/16'' x 30-1/2'' table with slide-out extensions for up to 51-1/2'' of length
- 4-3/8''H x 19-1/4''L fence angles from 90° to 45°
- Replacement carbide cutters available (#53059, sold separately)
-
Out of stock
The Rikon #20-800H 8'' Benchtop Jointer features a helical head with six rows of carbide insert cutters—16 carbide cutters in all. Each insert cutter has two edges for for an exceptionally smooth, flat jointed surface. The cutters can be rotated to expose a fresh edge, and when it comes time to replace them (see #53059), there is no need to level the knives as with a traditional jointer. The jointer itself features rigid, all-metal construction, machined aluminum tables with integral extensions that pull out for up to 51-1/2'' of support, a quick depth setting mechanism with scale, and an adjustable fence that tilts from 90° to 45°. It also comes with a spring-loaded safety guard, dust port, an easily accessible front-mounted on/off switch and two push blocks. Features: -
Modern, low profile ergonomic half mask comes with twin P3 HEPAC pleated filters already fitted. Grille covers the entire filter surface area deflecting particulates & moisture away. Material is odor-free and non-allergenic, with latex and silicone-free face seals. Less clogging pressure and inward leakage.•Highest filtration efficiency at 0.3 microns - 99.999% offering protection against wood dust, silica dust, weld fumes, asbestos, oils, mists, aerosols. •Lowest breathing resistance of any half mask on the market for maximum comfort & less condensation build-up. •Sleek unobtrusive design to accommodate visors, helmets, spectacles/goggles & other PPE. •Large downward facing exhaust for non-misting or steaming of goggles. •Latex & silicone-free TPE medical grade face seal so it can be worn for 8+ hours•Assigned Protection Factor:APF20Specify size at check out. Medium/Large Small/Medium Case & replacement filters sold separately. -
Out of stock
NEWMotor Motor Speed (no load) Amps, Hertz, Phase Dust Collection Velocity CFM Max. Static Pressure (at 0 CFM) Blower Impeller Sound Rating @ 6 Feet Canister Filtration Rating Filtration Efficiency Canister Pleated Filter Size Total Pleated Filter Surface Filter Cleaning Method Plastic Bag Length (installed) Plastic Bag Capacity Dust Ports / Hose Connections Intake Funnel Size Machine Certification1HP, TEFC 3,450 RPM 7 A / 3.5 A, 60 Hz, 1 Ph 800 @ 4” or 1,100 @ 5” inlet 7.2” 10” Diameter, Aluminum <86.375 dB 1 Micron 99% 19-5/8” x 7-1/8” 13.46 sq/ft Hand crank, internal rotating flapper 20” 1.5 Cu. Ft. 1 @ 5”, 2@4” 5” diameter All metal frame -
These compact, lightweight FenceClamps allow you to secure a wide variety of shop-made auxiliary fences to your existing fences without the clamp getting in the way. The clamp arm simply fits into a 3/8″ hole in the top of the auxiliary fence, preventing interference while you work. Clamps can be used in pairs for sacrificial fences, half-fences, resaw fences, singly as stop blocks and many more fixtures. Includes 2 clamps, which is all you will need!FenceClamp Features:
- Fits into a 3/8” hole in the top of the auxiliary fence
- Steel threaded components with rigid aluminum body
- Range of travel 1/2″-5-3/4″ (12mm to 146mm)
FenceClamps Can Be Used With:
- Table saws
- Router tables
- Miter saws
- Framing Squares
- And more
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product -
Out of stock
For your toughest shop pressing and stamping needs, this versatile 50-Ton Hydraulic Shop Press does it all! The two-speed pump operates the ram at a slow or fast pace to accommodate a wide variety of pressing applications. Featuring a fast-pump core that allows the head assembly to lower to the workpiece quicker than a slow-pump core, a hand-operated winch for raising and lowering the bed, and a spring return ram for faster retraction. Features:- Pneumatic and hydraulic hand-pump operation
- Winch and pulley system for lifting and lowering work table
- Built-in pressure gauge
- Welded steel frame for maximum rigidity
- Adjustable table accommodates wide variety of operations
- Includes two steel arbor plates
- Ram max applied force: 100,000 lbs. (50 tons)
- Hand winch lifting capacity: 1000 lbs.
- Ram maximum stroke: 7-7/16"
- Maximum distance to table: 39"
- Minimum distance to table: 9-1/4"
- Working air pressure: 110-125 PSI
- Footprint: 39-1/2"L x 27-1/2"W
- Overall dimensions: 51"W x 36"D x 68"H
- Approximate shipping weight: 540 lbs.
-
- Form-fitting TrekDry® material keeps working hands cool and comfortable.
- Stretch-elastic cuffs create a secure fit.
- Reinforced thumb and index finger provide added durability.
- Anatomically designed two-piece palm design eliminates material bunching.
- Pinched fingertip construction improves fingertip strength and durability.
- High-dexterity synthetic leather
-
INTENDED USESed with touchscreen technology.
- General Purpose
- Maintenance and Repair
- Equipment Operation
- DIY Home Improvement
- Machine washable.
-
- Form-fitting TrekDry® material keeps working hands cool and comfortable.
- Stretch-elastic cuffs create a secure fit.
- Reinforced thumb and index finger provide added durability.
- Anatomically designed two-piece palm design eliminates material bunching.
- Pinched fingertip construction improves fingertip strength and durability.
- High-dexterity synthetic leather
-
INTENDED USESed with touchscreen technology.
- General Purpose
- Maintenance and Repair
- Equipment Operation
- DIY Home Improvement
- Machine washable.
-
- Form-fitting TrekDry® material keeps working hands cool and comfortable.
- Stretch-elastic cuffs create a secure fit.
- Reinforced thumb and index finger provide added durability.
- Anatomically designed two-piece palm design eliminates material bunching.
- Pinched fingertip construction improves fingertip strength and durability.
- High-dexterity synthetic leather
-
INTENDED USESed with touchscreen technology.
- General Purpose
- Maintenance and Repair
- Equipment Operation
- DIY Home Improvement
- Machine washable.
-
-
This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a in glue line in precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4 In. to 2-3/4 In. thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers. Premium TiCo™ Hi-Density carbide ripping blend for maximum performance Extra large, flat tooth design leaves a smooth finish without the need for sanding or jointing Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish Specifications Brand Freud Tools Manufacturer Part Number LM72M010 Model LM72M010 -
Out of stock
Details- Assembly includes Half Facepiece Respirator and Particulate Filter 2091 P100
- Half facepiece design combines comfort and convenience
- Remarkably comfortable, soft, lightweight facepiece and easy-to-adjust head straps
- Removable filters can be replaced with NIOSH approved 3M filters and cartridges
- NIOSH approved for environments containing certain oil and non-oil based particles
NIOSH approved for environments containing certain oil and non-oil based particles.
This assembly includes a 3M™ 6000 Series Half Facepiece Reusable Respirator and two 3M™ 2091 P100 Particulate Filters. This assembly is NIOSH approved for environments containing certain oil and non-oil based particles. When properly fitted, this respirator helps provide protection in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead asbestos, cadmium, arsenic, and MDA at concentrations up to 10 times the Permissible Exposure Limit (PEL). This respirator is remarkably comfortable, soft, and lightweight, and features easy-to-adjust head straps. The swept-back design of the cartridges helps improve balance and visibility. Easy-to-adjust head straps allow for a customized fit to the user. When used to capacity, the included cartridges can be removed and replaced with new P100 Filter/Cartridges or other NIOSH approved 3M™ 2000 or 2200 Series Filters or 6000 Series Cartridges. The respirator can also be disassembled, cleaned, and reused, extending the life and cost effectiveness of the product.
NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. The 6000 Series is NIOSH approved for negative air purifying and positive pressure dual airline applications. The respirator comes with a P100 filter, which is replaceable. This half facepiece respirator may be used with any of these replacements: 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals.
Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable
-
Out of stock
Details- Assembly includes Half Facepiece Respirator and Particulate Filter 2091 P100
- Half facepiece design combines comfort and convenience
- Remarkably comfortable, soft, lightweight facepiece and easy-to-adjust head straps
- Removable filters can be replaced with NIOSH approved 3M filters and cartridges
- NIOSH approved for environments containing certain oil and non-oil based particles
NIOSH approved for environments containing certain oil and non-oil based particles.
This assembly includes a 3M™ 6000 Series Half Facepiece Reusable Respirator and two 3M™ 2091 P100 Particulate Filters. This assembly is NIOSH approved for environments containing certain oil and non-oil based particles. When properly fitted, this respirator helps provide protection in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead asbestos, cadmium, arsenic, and MDA at concentrations up to 10 times the Permissible Exposure Limit (PEL). This respirator is remarkably comfortable, soft, and lightweight, and features easy-to-adjust head straps. The swept-back design of the cartridges helps improve balance and visibility. Easy-to-adjust head straps allow for a customized fit to the user. When used to capacity, the included cartridges can be removed and replaced with new P100 Filter/Cartridges or other NIOSH approved 3M™ 2000 or 2200 Series Filters or 6000 Series Cartridges. The respirator can also be disassembled, cleaned, and reused, extending the life and cost effectiveness of the product.
NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. The 6000 Series is NIOSH approved for negative air purifying and positive pressure dual airline applications. The respirator comes with a P100 filter, which is replaceable. This half facepiece respirator may be used with any of these replacements: 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals.
Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable
-
Out of stock
Details- Advance silicone material for increased comfort and greater durability
- Proprietary 3M™ CoolFlow™ valve helps makes breathing easier
- Dual-mode head harness adjusts easily for either standard or drop-down mode
- Exhalation valve cover directs exhaled breath and moisture downward to reduce fogging
- Color coded to indicate size (small, medium or large) for easy identificatio
This half facepiece reusable respirator 7500 Series uses advanced silicone material to help provide comfortable and durable respiratory protection. The 3M™ Cool Flow™ Valve helps make breathing easier and can reduces heat and moisture build-up for cool, dry comfort.
The 3M™ Half Facepiece Reusable Respirator 7500 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved 3M cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator (commonly referred to as a “mask”) helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). This respirator uses an advanced silicone material that provides a softer feel on the face. A unique adjustment design helps reduce pressure points on the face for even more comfort. The 3M™ Cool Flow™ Valve helps make breathing easier and can offer cooler and drier comfort for the wearer. Head harness may be adjusted to drop down when not in active use (allows respirator to be removed without taking off hard hat). The exhalation valve cover directs exhaled breath and moisture downward while helping protect the valve area from debris while also making for easier cleaning. Recommended applications include abatement, painting, welding, chemical handling, construction, utilities, mining, pharmaceutical, and smelting. NIOSH, a Federal government regulatory agency, has tested and approved the 7500 Series with 3M™ cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. This half facepiece respirator may be used with 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™ Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ half Facepiece Reusable Respirator 7500 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.
-
Out of stock
Details- Advance silicone material for increased comfort and greater durability
- Proprietary 3M™ CoolFlow™ valve helps makes breathing easier
- Dual-mode head harness adjusts easily for either standard or drop-down mode
- Exhalation valve cover directs exhaled breath and moisture downward to reduce fogging
- Color coded to indicate size (small, medium or large) for easy identificatio
This half facepiece reusable respirator 7500 Series uses advanced silicone material to help provide comfortable and durable respiratory protection. The 3M™ Cool Flow™ Valve helps make breathing easier and can reduces heat and moisture build-up for cool, dry comfort.
The 3M™ Half Facepiece Reusable Respirator 7500 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved 3M cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator (commonly referred to as a “mask”) helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). This respirator uses an advanced silicone material that provides a softer feel on the face. A unique adjustment design helps reduce pressure points on the face for even more comfort. The 3M™ Cool Flow™ Valve helps make breathing easier and can offer cooler and drier comfort for the wearer. Head harness may be adjusted to drop down when not in active use (allows respirator to be removed without taking off hard hat). The exhalation valve cover directs exhaled breath and moisture downward while helping protect the valve area from debris while also making for easier cleaning. Recommended applications include abatement, painting, welding, chemical handling, construction, utilities, mining, pharmaceutical, and smelting. NIOSH, a Federal government regulatory agency, has tested and approved the 7500 Series with 3M™ cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. This half facepiece respirator may be used with 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™ Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ half Facepiece Reusable Respirator 7500 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.
-
Out of stock
Details- Features the 3M™ Cool Flow™ Exhalation Valve for cool comfort
- Two-strap disposable filtering facepiece respirator
- Adjustable nose clip to help provide a custom fit and secure seal
- N95
Designed for use in grinding, sanding and buffing applications. Lightweight, two strap filtering facepiece respirators with exhalation valve for cool comfort and an adjustable nose clip, the 07185 helps provide excellent protection.
Workplace applications include grinding, sanding, buffing and other dusty/hot operations. It features the 3M™ Cool Flow ™exhalation valve which makes the respirators more comfortable for the technician especially in hot, humid conditions and helps to extend the life of the respirator as it is less likely to collapse due to moisture. It also features an adjustable M noseclip to help provide a custom fit and secure seal. If respirator becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area immediately and dispose of the respirator.
-
Cut both woods and metals with this 2 HP 17" Combination Bandsaw.
We've taken all the best features from our vertical wood cutting bandsaws and added variable-speed blade control with two speed ranges to allow this Combination 17" Bandsaw to double up as a wood-cutting and metal-cutting bandsaw with the power and cutting capacity to tackle just about anything! You will find many other features that have made Grizzly chainsaws so popular with our customers such as an included cast iron fence with extruded-aluminum rail and resaw fence attachment, rack-and-pinon upper guide adjustment, cast iron trunnion, cast iron wheels and rack-and-pinion table tilt control. This bandsaw has everything you could wish for, including variable speed! The Grizzly G0640X Metal/Wood Bandsaw is covered by a one-year warranty that covers replacement parts and guards against factory defects. The G0640X is supported by a US-based product support team and replacement parts are available on-line and ship from our massive Parts Department in Springfield Missouri. This bandsaw is produced in a ISO 9001 factory to assure quality. Features:- Variable speed control
- Requires single-phase power
- Left and right table tilting control
- Upper and lower ball-bearing blade guides
- Rack-and-pinion adjustment on upper blade guide support
- Precision-ground cast iron table
- Fully balanced cast iron wheels with rubber tires
- Quick release blade tension
- Two 4" dust ports
- Includes rip fence and miter gauge
- Rip fence comes with: magnified cursor, dead lift quick release, solid lever lock and extruded aluminum resaw fence that also transforms for cutting thin stock
- Motor: 2 HP, 220V, 3-phase, 1725 RPM, 8 Amps (Actually runs on single-phase, 220V)
- Maximum cutting height: 12"
- Throat capacity: 16-1/4"
- Blade length: 131-1/2"
- Blade size range: 1/8"-1"
- Included blade size: 131-1/2" x 1/2" x 6 TPI (similar to Grizzly model H4807 wood cutting blade)
- Blade speed: Variable, 100-3600 FPM
- Table tilt: 45&DEG; right, 5° left
- Floor to table height: 37-1/2"
- Table size: 23-5/8" x 17-1/4"
- Overall size: 32" W x 73" H x 32" D
- Approximate shipping weight: 416 lbs.
-
Sale!
The latest addition to our vertical metal-cutting bandsaws offers affordable versatility not found on any saw in its class. Start with inverter motor speed control. 220V, single-phase goes in and 220V, 3-phase comes out, giving you variable speed control over the blade speed with just the turn of a dial. Blade changes are fast and easy with the quick-release blade feature. This combination allows you to cut any variety of materials (even wood!) and adjust for blade width, tooth pitch and speed on one machine! Check out all the other features listed below. Features:- Variable speed control
- Left and right table tilting control
- Upper and lower blade guides
- Rack and pinion adjustment on upper blade guide support
- Precision ground cast iron table
- Fully balanced cast iron wheels with rubber tires
- Quick release blade tension
- Steel guide blocks
- 2-1/2" universal dust port
- Includes rip fence and miter gauge
- Rip fence comes with: Right and left reading indicators, T-slots for quick change attachments, Dead lift quick release, Ball bearing slide, Solid lever lock
- Motor: 1-1/4 HP, 220V, 3-phase, 1725 RPM, 4.8 Amps with single-phase inverter
- Required power source: 220V, single-phase, 60Hz
- Maximum cutting height: 10"
- Throat capacity: 13-1/2"
- Blade length: 108"
- Blade size range: 1/8" - 1"
- Included blade size: 108-1/8" x 3/8" x 6 TPI (similar to Grizzly model H9967 wood cutting blade)
- Blade speed: variable, 150 - 3000 FPM
- Table tilt: 45° right, 5° left
- Floor to table height: 38-1/2"
- Table size: 16" x 20" Overall dimensions: 72-1/2"H x 30"W x 30"D
- Approx. shipping weight: 277 lbs.
-
Sale!
We took our rock-solid 2 HP, 10" table saw platform and added both a blade guard and cabinet dust collection system for the ultimate in clean operation. The easy-glide, two-position fence system quickly adjusts to rip narrow workpieces. The clear blade guard features built-in dust collection and a quick-release system for fast and easy guard and spreader/riving knife changeovers. Specifications- Motor: 2 HP, 115V/230V (prewired 115V), single-phase, 16A/8A
- Rip capacity: 31-1/2" right ,11-3/8" left of blade
- Max. depth of cut @ 90°: 3-1/8"
- Max. depth of cut @ 45°: 2-1/8"
- Table size with extension wings: 40-1/8" W x 27" D
- Distance from front of table to center of blade: 16-1/4"
- Floor-to-table height: 34-1/4"
- Arbor diameter: 5/8"
- Arbor speed: 4000 RPM
- Max. width of dado: 13/16"
- Dust port size: 4"
- Overall dimensions: 63" W x 40" D x 48" H
- Footprint: 20-1/2" L x 19-1/2" W
- Approximate shipping weight: 449 lbs.
- Fully-enclosed blade guard with dust port
- Quick-release spreader/riving knife system
- Hinged motor cover
- Chromed cast-iron handwheels
- Heavy-duty miter gauge
- Poly-V drive belt for reduced noise/vibration
- Precision-ground cast-iron table
- Cabinet-mounted cast-iron trunnions
- Durable powder-coated finish
- Deluxe 2-position aluminum rip fence
- Easy-glide fence system with micro adjustment
- Standard & dado table inserts
- Includes 10" x 40T carbide-tipped blade
-
Out of stock
Dado Insert for 10-205- For use with 10-205
- Great for use with dado set
- Allows for minimum clearance from dado blade
- Steel Construction
-
Out of stock
The 10” Left Tilt Contractor Table Saw 10-205 is a no-nonsense machine whose simplicity is the strength behind its popularity with home craftspeople and professional workshops. Operating this table saw is straight forward – blade controls are large and easy to access, box-type rip fence sets accurately,Dual table ‘T’ slots give great options for use of miter gauges and other jigs, blade changes are easy, blade guards and control switch with large ‘off’ paddle add excellent safety measures to the user, and the built-in mobile base allows moving the saw around the shop easy. Wired for use with 3-wire 120V receptacles.• Powerful 1-3/4 HP, 1Ph, 120/240V, 3450 RPM motor • Industrial quality, multi-ribbed flat J-belt for smooth power transfer • Precision machined cast iron table top and wings • Dual table ‘T’ slots for use with miter gauges and jigs • Magnetic table insert removes without tools • Clear blade guard with riving knife/splitter for extra user safety -
- Powerful 13 amp Motor will cut thru natural and man made pavers
- 7” Diamond Cutting Wheel handles up to 2 3/8” stone
- Largest Rip/diagonal cutting capacity in class
- Heavy duty rip fence w/ positive stop stops @ 0, 22.5 ,45 degrees
- Heavy duty rail system engineered for exceptional straight, accurate smooth cuts
- Removable extension table for use w/ larger format tiles
- Saw frame constructed of durable steel pipe
- Snake pipe water nozzle allows precise water control and placement
- Front access to water tray greatly simplifies cleaning & draining
- Water supply line is externally mounted and easily accessible for cleaning
- Blade Guard easily opens and secures with finger knob
- Blade splash guard and back splash tray keeps work area dry and returns water to tray
- Water put designed for use in water tray or bucket
- Divider in water tray filters slurry and extends pump life
-
Sand stock up to 36-1/2" wide and 4" thick with variable speed feed control and the economy of spiral-wrapped 6" wide sandpaper rolls. Built for production environments, these Drum Sanders feature industrial-quality conveyor belts and dual 6" sanding drums. Includes a 4-port dust scoop to maximize dust collection, easy access to sanding drums, emergency stop for safety, solid steel construction, independent motor control, amp load meter, and massive power with a 10 HP, single-phase motor. With the variable-speed control on the conveyor, you can dial in the perfect finish you need for each job. CSA certified meeting CSA C22.2 #105-1953 and UL 987-8 standards! -
- INTELLISAND Technology: Automatically adjusts conveyor speed based on load which prevents gouging, damaging or burning stock. This Provides consistent finish even with varying grain pattern
- Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no "flex" in conveyor, guaranteeing flatness to less than .010" across the width of the sander
- Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner
- Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap
- Easiest access to abrasive fastening system of any drum sander! Machine design includes additional space around abrasive, eliminating the need for special tools
- Self-cooling drum prevents overheating and extends abrasive life
- Maximum Width: 37"
- Minimum Length: 3-1/2"
- Maximum Thickness: 12"
- Minimum Thickness (in): 1/32"
- 43" x 58" x 31"
- 5" x 37" (extruded aluminum)
- 1740 RPM
- 4" vacuum ports, min. 1800 CFM recommended
- 4, sealed and permanently lubricated
- Base with Casters
- 100 in. -lb. torque, direct drive D.C motor, ranged variable, 0-15 FPM
- 5 HP
- 208-230V, 60HZ; 1 Ph, 30 amp service; 3 Ph 20 amp service
- 525 lbs
-
Out of stock
- A complete kit to maximize the value of your FS guide rails when used with your Festool plunge saw or router
- All the things you need, packed neatly and conveniently in a Systainer. No need to spend time looking for the pieces
- Angle Unit for mitered or compound cuts, Limit Stop for repeat cuts, Deflector for more efficient cutting, Connectors for limitless cutting, and more
- Includes: 1 Angle unit, 1 Limit Stop, 1 Splinterguard (1400 mm), 1 Deflector, 2 Guide Rail Connectors, and 2 Screw Clamps, packed in a Systainer 1
- Made in Germany
