Uncategorized

Tormek T-8 Original – Water Cooled Sharpening System for Edge Tools – US Version – English Handbook

$915.00
The Tormek T-8 Original is a powerful and versatile water cooled sharpening system that includes everything you need to take your sharpening to the next level. The advanced design and its user-friendly operation give you the best possible conditions for successful sharpening with top results. The Tormek T-8 Original is ideal for quality-conscious do-it-yourselfers as well as professionals.
Sharpen all your edge tools.

SE-77 Square Edge Jig and TT-50 Truing Tool included.

Water cooled sharpening with no risk of overheating the steel.

Exact replication – sharpen your tools with unbeatable precision.

Efficient grindstone with adjustable characteristics equivalent to 220 to 1000 grit.

Solid zinc frame and integrated mounts for controllable and accurate sharpening.

Powerful industrial AC motor for continuous use.

8 year WTY. (5+3 after online registration).
Add to cart Details
Out of stock

Mr Heater® 50,000 BTU Big Maxx® Natural Gas Utility Heater MHU50

$985.00
If you are looking to turn your garage or barn into a work space you can use all year-round, you will have to find a safe quiet and reliable heat source. This 50,000 BTU Natural Gas Utility heater is the way to go. It uses a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas. These heaters only require 115v AC power and can be vented vertically or horizontally - please check local codes and restrictions. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch. With the Durable Spark ignition and robust factory standard self-diagnostic control module, we can offer a 3 year factory warranty on all parts and burners and a 10 year warranty on any defects in the heat exchanger. This heater offers the operating versatility and safety that you have come to expect from Mr. Heater®.

50,000 BTU per hour

For use with natural gas

Heats up to 1,667 sq. ft.

Spark ignition features self-diagnostic control module

Includes 2 angle brackets for ceiling mount

Low Profile Design - Can be installed in low-ceiling buildings

Minimum 8 ft clearance from floor to base of heater required

1/2in gas connection

Category 1 vertical, category 3 horizontal venting

Natural Gas to Liquid Propane conversion kit included

Thermostat sold separately
Details
SuperMax 19-38 Combo Sander Nylon Brush Head

$990.00

Add to cart Details
Out of stock

Simpson Cleaning PS60843 PowerShot 4400 psi Gas Pressure Washer

$990.00
- Professional Performance: Easy-to-assemble and easy-to-start with its CRX 420cc premium engine, the PowerShot power washer is great for contractors who specialize in deck cleaning, wood restoration, paint preparation, and all other professional services
- Power and Durability: A powerful, reliable, maintenance-free AAA industrial triplex plunger pump delivers 4400 PSI at 4.0 GPM and includes thermal relief to prevent overheating; PowerBoost Technology delivering higher pressure at the nozzle
- Sturdy and Portable: The welded steel frame construction with powder coated finish offers durability and corrosion resistance; 13-inch premium pneumatic tires deliver ease of maneuverability across various terrain and uneven ground
- Includes Quality Simpson Accessories: Monster 3/8-inch x 50-foot high-pressure hose is kink and abrasion resistant hose with quick connect fittings and polyurethane outer jacket; 5 Quick connect nozzle tips: 0°, 15°, 25°, 40° and Soap; Ergonomic spray gun 31-inch steel wand/lance
- Important Notes: Keep max fuel level 1/2 Inch below bottom of filler neck to avoid spillage; All pressure washers are 100% functionally tested in factory and may contain minimum residual fuel/oil or fuel odor
Details
Delta Power Tools 22-590X Bench Top Planer

$999.00

The 22-590X 13" portable planer was designed for maximum durability and precision. It features a Delta designed three knife cutter head that delivers an ultra smooth finish and up to three times longer blade life than competitive three knife planers. Includes a patented cutterhead lock system and best in class in-feed/out-feed tables to minimize snipe, and reduce waste. The full width material removal gauge indicates the amount of material being removed with each pass across the entire width of the material, allowing you to utilize the entire width of the cutterhead.

Add to cart Details
Out of stock

96-110 Delta 10″ Cruzer Wet Tile/Stone Saw

$999.97
- Powerful 15 amp Motor will cut thru natural and man made pavers
- 10” Diamond Cutting Wheel handles up to 3 3/8” stone
- Largest Rip/diagonal cutting capacity in class
- Heavy duty rip fence w/ positive stop stops @ 0, 22.5 ,45 degrees
- Heavy duty rail system engineered for exceptional straight, accurate smooth cuts
- Removable extension table for use w/ larger format tiles
- Saw frame constructed of durable steel pipe
- Snake pipe water nozzle allows precise water control and placement
- Front access to water tray greatly simplifies cleaning & draining
- Water supply line is externally mounted and easily accessible for cleaning
- Blade Guard easily opens and secures with finger knob
- Blade splash guard and back splash tray keeps work area dry and returns water to tray
- Water put designed for use in water tray or bucket
- Divider in water tray filters slurry and extends pump life
Details
Grizzly Industrial G0839P – 6″ x 79″ Edge Sander – Polar Bear

$1,055.00

1-1/2 Horsepower 6" x 79" Wood Edge Sander with Extra Large Tables
This 6" x 79" Edge Sander will shift your expectations of what an edge sander should be. The pivoting motor and platen design makes horizontal-to-vertical position changes a breeze, and with 3-1/2" of vertical edge-table travel and the ability to tilt both edge-table and end-table from 0-45°, you'll have all the angles covered. The 6" x 79" belt rotates around a 2-3/4" end roller for tight radius sanding, and belt tracking and tension are easily adjustable with conveniently located lock knobs.

Add to cart Details
SuperMax 13” Flatter Sanding Hub w/ Dovetail Slots SUPMX-60-2540

$1,059.99
Enhance the versatility and convenience of your SuperMax 13'' Combo Brush/Drum Sander with the SuperMax 13'' Flatter Sanding Hub with Dovetail Slots. This hub serves as a replacement for a damaged hub, or as an additional accessory, allowing you to keep a different grit of flatter strips readily available for your sanding needs. The hub features dovetail slots, ensuring a secure fit for your sanding strips. With a diameter of 120mm and a length of 312mm, this hub is designed to fit your sander perfectly.
Compatible Sander: 13" SuperMax Combo Brush/Drum Sander

Bore Diameter: 2''

Overall Dimensions: 120mm dia x 312mm long

wt 18lbs
Add to cart Details
Out of stock

Mr Heater®400,000 BTU Forced Air Propane Heater MH400FAVT

$1,165.00
Heavy-duty design built for the jobsite. This Thermostatically controlled Mr. Heater 400,000 BTU Propane Forced Air Heater comes with a standard 10ft hose, regulator, and all the safety you would expect of a Mr. Heater product. Equipped with factory installed high limit switch and continuous solid state ignition, you can feel comfortable using this heater on any jobsite. Just plug the heater into a 110v outlet then hook up the included hose and regulator to a 100lb propane tank or larger, then you are ready to take the chill out of any job.
250,000 - 400,000 BTU per hour

For use with propane gas

Heats up to 10,000 sq. ft.

Operates up to 17 hours on 2-100 lb. propane tanks on low setting

Rugged and durable steel construction

Economical, efficient and clean burning

Heavy duty high output fan

Hose and regulator included

Two 100 lb. propane tanks are required
Details
Grizzly G1183 – 6″ x 48″ Belt/12″ Disc Combo Sander

$1,195.00
G1183 6" x 48" Belt/12" Disc Combo Sander

Built to the scale and level of quality professional woodworkers and metalworkers demand.
The heavy-duty G1183 6" x 48" Belt/12" Disc Combo Sander features a sanding belt that operates horizontally, vertically or at any angle in between. The sanding belt speed is 5000 FPM and the disc speed is 3450 RPM. Both cast-iron tables tilt for any job. The belt sander table tilts 90° while the disc sander table tilts 30° left and 45° to the right. The convenient, quick-release lever makes tension adjustment and belt changes and a snap. There is a full range of replacement sanding belts and sanding discs for the G1183. Belt rollers have shielded ball bearings and the top roller has a fine-tuning knob for precision tracking. The base accepts 5/8" fasteners for mounting to workbench. Like all Grizzly combination sanders, the G1183 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G1183 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the combination sander may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory
SPECIFICATIONS:
- Motor: 1 HP, 110V/220V, single-phase, 12A/6A
- Sanding belt size: 6" x 48"
- Sanding belt speed: 5000 FPM
- Belt platen size: 6" x 14-1/2"
- Belt table size: 7" x 12-1/2"
- Disc diameter: 12"
- Disc backing type: PSA
- Disc speed: 3450 RPM
- Disc table size: 7" x 16-1/2"
- Table tilt 30° L, 45° R
- Number of dust ports: 2
- Dust port sizes: 2-1/2", 3"
- Footprint: 17" x 14"
- Overall dimensions: 32-1/2" W x 16-1/2" D x 29-1/2" H
- Approximate shipping weight: 148 lbs.
FEATURES:
- Quick belt release
- Disc table positive stops at 90°
- Belt table positive stops at 45° and 90°
- Two cast-iron tables
- Top roller has fine tracking knob
- Miter gauge included
Add to cart Details
Out of stock

SIMPSON Cleaning PS4240 PowerShot 4200 PSI Gas Pressure Washer, 4.0 GPM, Honda GX390 Engine, Spray Gun, 5 QC Nozzle Tips, 3/8″ x 50′ Hose

$1,199.90
PS4240 PowerShot Gas Pressure Washer Powered by Simpson

The SIMPSON PowerShot Series features heavy-duty pressure washers with flow and reliability. Perfect for contractors who specialize in deck cleaning, wood restoration, paint preparation, graffiti removal, and all other professional cleaning services. Equipped with a premium HONDA engine built with high-quality components, designed for optimum performance and renowned for being easy to start.

HONDA GX390 engine with a low oil shutdown feature

Reliable AAA industrial triplex plunger pump

Professional Performance: Easy-to-assemble and easy-to-start with its Honda GX390 premium engine, the PowerShot power washer is great for contractors who specialize in deck cleaning, wood restoration, paint preparation, and all other professional services.PowerBoost: Yes

Power and Durability: A powerful, reliable, maintenance-free AAA industrial triplex plunger pump delivers 4200 PSI at 4.0 GPM and includes thermal relief to prevent overheating

Sturdy and Portable: The welded steel frame construction with powder coated finish offers durability and corrosion resistance; 13-inch premium pneumatic tires deliver ease of maneuverability across various terrain and uneven ground

Includes Quality Simpson Accessories: Monster 3/8-inch x 50-foot high-pressure hose is kink and abrasion resistant hose with quick connect fittings and polyurethane outer jacket; 5 Quick connect nozzle tips: 0°, 15°, 25°, 40° and Soap; Ergonomic spray gun 31-inch steel wand/lance

Important Notes: 49-state compliant; Does not ship to California; Keep max fuel level 1/2 Inch below bottom of filler neck to avoid spillage; All pressure washers are 100% functionally tested in factory and may contain minimum residual fuel/oil or fuel odor
Details
Tormek Sharpening System Drilling System TBD806 T8 Sharpener

$1,206.00

The Tormek T-8 is our top of the line water-cooled sharpening system, and is – by far – the best sharpening system one can buy. If you use tools that need a finely honed, razor-sharp edge, this machine will give you a lifetime of excellent service, and ensure your tools have an edge that allows you to effortlessly work your magic. It sharpens all manner of tools – knives, scissors, wood chisels, plane irons, spoke shaves, carving tools, lathe turning tools, Axes, and much more. If it has an edge, the Tormek T-8 will sharpen it. The Tormek Grindstone is constructed so that with the Stone Grader it can be treated to change its property from 220 grit to 1, 000 grit. This has obvious advantages. You can make both the first fast grinding and the sharpening on the same grindstone and the same grinding machine and with the same jig setting. After grinding, the 8-5/8" diameter x 1-7/32" genuine leather honing wheel gently removes the burr and hones the edge to razor sharpness. The T-8 System includes the Advanced Square Edge Jig, Truing and Dressing Tool, Stone Grader, Angle Master, Honing Compound, Handbook and Instructional DVD and comes with a seven-year factory . Also included is Tormek’s patented Drill Bit Attachment which allows you to sharpen your drill bits with the highest precision. The beneficial 4-facet point prevents drill from “walking” that is normal with standard round point bits. The high precision sharpening – both cutting edges are sharpened to an exact equal length and symmetrically – make the drill work efficiently and the life of the drill bit is considerably prolonged. The optimal point and clearance angles can be set according to each drilling requirement, which depends upon the drill size and material. Completely restore worn drills as well as broken drills to a perfect shape. Stainless steel shaft and hardware

Add to cart Details
Tormek T-8 Drill Bit Sharpener Kit Tormek T-8 Original DBS-22 Drill Bit Sharper

$1,250.00

This bundle combines the Tormek T-8 water-cooled sharpening system with the DBS-22 Drill Bit Sharpening Attachment.

This Tormek T-8 Drill Bit Sharpener Kit includes the DBS-22 Drill Bit Sharpening Attachment to sharpen your drill bits (3-22 mm) with the highest precision. The DBS-22 Drill Bit Attachment allows for complete control when sharpening drill bits eliminating the risk of overheating the steel. You can completely restore worn as well as broken drill bits to a perfect shape.

The Tormek T-8 is Tormek’s most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel

Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, TT-50 Truing Tool, WM-200 Angle Master, SP-650 Stone Grader, DBS-22 Drill Bit Sharpening Attachment

Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine.

Add to cart Details
WILTON Mechanics Pro Vise 10” Jaw Width, 12″ Jaw Opening, 360° Swivel 28814

$1,266.99

WILTON Mechanics Pro Vises are designed and built using premium materials for unbeatable durability. Featuring an enclosed spindle, precision slide bar, innovative thrust bearing, 360 ̊ swivel, plus WILTON’s lifetime warranty—you’ll never want another vise, unless it’s a WILTON.

Add to cart Details
Out of stock

US Stove Company Pellet Stove 40k BTU, Model# 5040 45lb

$1,279.95

Proven design and technology come together in this beautiful pellet stove. Designed for moderately sized homes and condos, the 5040 comes with high end features such as remote thermostat hookups and simple to use control all packed into a neat little package that is perfect for smaller spaces. The digital control board has 4 heat settings and offers on/off or ultra low burn settings to give you up to 40 hours of burn time with the 45 lb hopper. This is a classic stove design that is worthy of most any space in your home. Pellet heaters work by using a software driven control board to precisely deliver a pre-determined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home.

Details
Sale!

Grizzly Industrial G0860 1-1/2 HP Portable Cyclone Dust Collector (Used)

~~$1,395.00~~ $1,299.99
Customer return. Dings, dents, scratches, chipped paint, bent brackets, filter screen dent.

G0860 1-1/2 HP Portable Cyclone Dust Collector

For the shop tight on space needing a portable dust collector.
The G0860 1-1/2 HP Portable Cyclone Dust Collector features an impressive 868 CFM and up to 9.7" of static pressure, creating a vortex of incoming air that extracts heavy wood chips and large dust particles into a plastic-bag-lined steel drum. The remaining fine dust travels past the 12-3/4" aluminum impeller, is caught by a canister filter and then deposited in a separate plastic collection bag. The spun-bond polyester filter catches 99.9% of particles to 1-micron in size and is pleated to provide maximum surface area for efficient air flow. A turn of the crank handle rotates the paddle brushes, knocking caked-on dust off of the pleats to keep your CFM as high as possible. The collection drum features a quick-release handle that makes it easy to roll it out for sawdust disposal. This cyclone has a normal operating sound range of 78 dB, slightly quieter than a telephone dial tone.
A great value for the price and an upgrade over any single-stage unit.
Replacement T30314 Filters are available. The upgraded T30489 HEPA Filters are also available for those wanting to capture particles down to 0.3 microns. Like all Grizzly machines, the G0860 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The G0860 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your two-stage dust collection system. The Grizzly Customer Service and Technical Support Teams are U.S. based. Made in an ISO 9001 factory
SPECIFICATIONS
- Motor: 1-1/2 HP, 110V, single-phase, 15A
- Intake hole size: 6"
- Impeller: 12-3/4" aluminum
- Airflow capacity: 868 CFM @ 1.8" SP
- Max static pressure: 9.7"
- Filtration: 1-micron
- Filter surface area: 28.1 sq. ft.
- Collection size: 20-gallon drum
- Sound rating: 78dB
- Overall dimensions: 27-1/2" W x 44" L x 70" H
- Approximate shipping weight: 278 lbs.
FEATURES
- Collection drum with quick-release handle for easy disposal
- Two-stage operation for ultimate dust collection
- Swivel casters
- Lift handle and roll drum for easy sawdust disposal
- Pleated filter with paddle brushes and crank handle for max air flow efficiency
- Vacuum equalizer built into collection drum for use with disposable plastic bags
- Wireless remote control
Unit sold as is.
Add to cart Details
Out of stock

10-205 RIKON 10″ Contractor Saw w/Steel Wings

$1,399.90

The 10” Left Tilt Contractor Table Saw 10-205 is a no-nonsense machine whose simplicity is the strength behind its popularity with home craftspeople and professional workshops. Operating this table saw is straight forward – blade controls are large and easy to access, box-type rip fence sets accurately,

Dual table ‘T’ slots give great options for use of miter gauges and other jigs, blade changes are easy, blade guards and control switch with large ‘off’ paddle add excellent safety measures to the user, and the built-in mobile base allows moving the saw around the shop easy. Wired for use with 3-wire 120V receptacles.

• Powerful 1-3/4 HP, 1Ph, 120/240V, 3450 RPM motor • Industrial quality, multi-ribbed flat J-belt for smooth power transfer • Precision machined cast iron table top and wings • Dual table ‘T’ slots for use with miter gauges and jigs • Magnetic table insert removes without tools • Clear blade guard with riving knife/splitter for extra user safety

Details
Supermax 16-32 Drum Sander

$1,459.00
The 16-32 Drum Sander (#71632) is the newest member of SuperMax Tools drum sander family which was designed with new features to improve productivity.
- Exceptional SuperMax Features
  Supermax has addressed issue common with other drum sanders by engineering features that are exclusive to their 16-32 machines. No other drum sander on the market has these features!
  
  Patented “Quick Lever Adjustment” which allows height adjustments from 0″-3″ with one pull of a lever versus 48 revolutions of a hand wheel greatly reducing set-up time and increases productivity
  
  Includes build-in Digital Read Out which helps maintain consistent thicknesses to increase accuracy and quality.
  
  A newly designed Turbo Vented Dust Port increases CFM air-flow to dust collectors by 15%.
  
  Simple alignment feature – just one nut adjusts the conveyor to parallel the sanding head, making aligning the conveyor to the sanding head fast and easy
  
  Indexed alignment setting – the fast lever is an indexed alignment setting for narrow and wide stock. When sanding stock wider than 16″, the index lever will properly adjust the conveyor for flawless wide sanding.
  
  Drum will never go “out of alignment” – the drum carriage is bolted to the base, preventing any movement or alignment issues.
  
  INTELLISAND Technology
  
  CSA Certified
  
  Folding in feed/out feed tables sold separately
Add to cart Details
Sale!

Grizzly G0771Z – 10″ 2 HP 120V Hybrid Table Saw w T-Shaped Fence

~~$1,795.00~~ $1,590.00
This hybrid is a selective blend of the best features of the contractor-style table saw and cabinet style table saw. Like the cabinet saw, it has an enclosed cabinet with 4" dust port, heavy-duty cast iron trunnions that mount to the cabinet, and plenty of power (with its 2 HP motor) to easily rip through hardwoods or cut dadoes. Like the contractor-style saw, it's still light enough to move around (it weighs approximately 286 lbs. when fully assembled) and it's easy on the budget. The fence on this machine is also a hybrid of some of the best features we've had on table saws in the last 30+ years. It has the easy lift-off and simple adjustability of the popular T-shape Shop Fox® Classic fence, the rock-solid front locking ability of the Shop Fox® Original fence, and the accessory T-slots of the Shop Fox® Aluma-Classic fence. To top it all off, this saw features an innovative quick-release blade guard and riving knife system that can be changed in seconds—and it's prewired to run on an ordinary 120V, 20A circuit! ETL listed meeting UL 987 8th Edition and CSA C22.2 #71.2 standards! Made in an ISO 9001 Factory SPECIFICATIONS:
- Motor: 2 HP, 120V/240V (prewired 120V), single-phase, 15A/7.5A
- Rip capacity: 31" right, 16-3/4" left of blade
- Max. depth of cut @ 90°: 3-1/4"
- Max. depth of cut @ 45°: 2-1/4"
- Table size with extension wings: 40-1/2" W x 27" D
- Distance from front of table to center of blade: 15-1/2"
- Floor-to-table height: 35-3/8"
- Arbor diameter: 5/8"
- Arbor speed: 3450 RPM
- Max. width of dado: 13/16"
- Overall dimensions: 64" W x 40-1/4" D x 35-1/2" H
- Footprint: 21" L x 19-1/2" W
- Approximate shipping weight: 330 lbs.
FEATURES:
- Cast-iron table and extension wings
- Cast-iron trunnions
- Easy-glide fence system
- Quick-release blade guard & riving knife
- 4" Dust port
- T-slot miter gauge
- Beveled front table edge
Add to cart Details
Out of stock

Rikon 10-324TG 14″ Bandsaw

$1,599.99

14” Bandsaw 10-324TG is RIKON’s most popular model due to its many professional features – including tool-less blade guides, a quick release blade tension lever, large adjustment handles, hinged safety blade guard with sight window, high work table height, and base stand with storage shelf.

Its dual voltage, 1-1/2HP motor provides ample power for most every work encountered. Pre-lubricated, sealed thrust and side ball bearing guides give smooth blade support during difficult cuts. Includes 6″ tall rip fence with re-saw bar. Wired for use with 3-wire 115V receptacles.

• Rugged welded steel column and frame • Balanced cast aluminum drive wheels • Resaw Capacity 13″ • Dual blade speed ranges – 1445 / 2950 FPM • Machined cast iron table with miter gauge ‘T’ slots • Quick-release blade tension system • Rack and Pinion upper guide adjustments • Dependable 1.50HP 60Hz motor

Details
Makita PDC1200A01 ConnectX™ 1,200Wh Portable Backpack Power Supply

$1,629.00

The ConnectX™ Portable Backpack Power Supply (PDC1200A01) is a high-capacity backpack that delivers 1200 watt hours of output. It provides longer run time to last an entire workday. Actual run times vary by product, application, and workday amount. It works with 36V (18V X2) LXT (adapter included) and 40V max XGT (adapter sold separately) systems.

It is durably constructed, IPX4-rated for weather resistance. The battery box can be detached from the harness and to be used a stationary power supply. It features a flat base, allowing the product to stand upright. There is an integrated carrying handle for convenience.

An L.E.D. battery charge level indicator allows the operator to monitor battery charge. The power supply reaches a full charge in 3 hours (AC power supply included).

Add to cart Details
Sale!

Grizzly G0814X – 6″ Jointer W/Stand & V-Helical Cutterhead

~~$1,790.00~~ $1,690.00
Grizzly G0814X 6" Jointer W/Stand & V-Helical Cutterhead

An upgraded jointer with a V-helical cutterhead
Stepping up from our G0814 6" Jointer, the G0814X comes equipped with a 4-row V-helical cutterhead for unmatched finish and long-lasting cutter edge durability. The V-helical cutterhead features 24 indexable carbide inserts that can each be rotated up to 3 times to expose a new sharp edge. No more replacing or sharpening blades every time they get dull or nicked. You'll get quieter operation, and most importantly, a significantly better finish with less tear-out using this cutterhead vs. a straight-knife model. For increased mobility, the cabinet stand comes with a built-in mobile base. Engage the foot pedal caster to move your machine around. Lock the machine down when you are ready to work. The fence is fully adjustable from 45° to 135°. It has built-in stops at 45°, 90° and 135°. Like all of the Grizzly jointers, the G0814X comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0814X's manual is packed with useful information and the technical support team is U.S. based. Parts and accessories for the jointer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. Made in Taiwan SPECIFICATIONS:
- Motor: 1 HP, 110V/220V (prewired 110V), single-phase, 14A/7A
- Maximum width of cut: 6"
- Maximum depth of cut: 1/8"
- Maximum rabbeting depth: 1/2"
- Cutterhead diameter: 2-1/2"
- Cutterhead type: 4-row V-helical
- Insert size & type: 15mm x 15mm x 2.5mm, indexable carbide
- Cutterhead speed: 5000 RPM
- Table size: 6-5/8" x 47-3/8"
- Table adjustment type: Handwheel
- Fence size: 29-1/8" x 4"
- Minimum stock length: 8"
- Minimum stock width: 3/4"
- Minimum stock thickness: 1/2"
- Dust port size: 4"
- Footprint: 13-1/2" x 18"
- Overall dimensions: 47-1/2" W x 20" D x 42" H
- Approx. shipping weight: 260 lbs.
FEATURES:
- 4-row V-helical cutterhead with 26 indexable carbide inserts
- Cabinet stand with built-in mobile base
- Precision-ground cast-iron tables with dovetailed ways
- Heavy-duty center-mounted fence with stops at 45°, 90° & 135°
- V-belt drive system
- Cabinet-mounted power switch
- Includes two push blocks
Add to cart Details
Out of stock

Grizzly G0452Z – 6″ x 46″ Jointer w/ Spiral Cutterhead

$1,695.00
Another top-of-the line 6" Jointer from Grizzly, the G0452Z has everything you need: a 4-row spiral cutterhead with 32 indexable carbide inserts, dovetailed-way tables, handwheel control for dead-on accurate outfeed table adjustment, a large 5" x 35" cast-iron fence, convenient pedestal-mounted switch with large shut-off paddle, a solid one-piece cabinet stand with built-in mobile base, and much more! If you're looking for a 6" spiral cutterhead jointer at quality and price that can't be beat, this is it! Certified to CSA & UL standards SPECIFICATIONS:
- Motor: 1-1/2 HP, 120V/240V (prewired 120V), single-phase, 15A/7.5A
- Maximum width of cut: 6"
- Maximum depth of cut: 1/8"
- Maximum rabbeting depth: 1/2"
- Cutterhead diameter: 2-1/2"
- Cutterhead type: 4-row spiral with 32 inserts
- Insert size & type: 14 x 14 x 2mm, indexable carbide
- Cutterhead speed: 4800 RPM
- Table size: 7-1/2" x 46"
- Fence size: 35" L x 5" H
- Minimum stock length: 8"
- Minimum stock thickness: 1/2"
- Dust port size: 4"
- Footprint: 18" x 13-1/2"
- Overall dimensions: 46" W x 27-1/2" D x 49" H
- Approx. shipping weight: 268 lbs.
FEATURES:
- Precision-ground cast-iron tables & fence
- Tables slide on dovetailed ways
- Handwheel-adjusted outfeed table
- Lever-adjusted infeed table with depth gauge
- Rabbeting table
- Pedestal-mounted switch with large shut-off paddle
- Center-mounted fence with rack & pinion adjustment
- Fence stops at 45°, 90°, and 135°
- V-Belt drive
- Solid cabinet stand with built-in mobile base
- Pair of push blocks included
Details
Out of stock

JT9-708599 -JSG-6DC BELT/DISC SANDER

$1,699.95
JET JSG-6DC 6"x48" Belt / 12" Disc Benchtop Sander, 1-1/2HP, 1Ph 115/230V (708599)

About this item
- VERSATILITY: Precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles.
- LONGER LIFE: Graphite-covered steel platen runs cooler, increasing machine and belt life.
- EFFICIENCY: 4" dust port on the back of the base collects dust effectively from both the belt and disc.
- POWERFUL: 1-1/2 HP motor easily handles the toughest sanding operations.
- PORTABILITY: Built-in handles make machine relocation easier.
Details
Out of stock

Mr Heater® 80,000 BTU Big Maxx® Natural Gas Utility Heater MHU80

$1,725.00
If you are looking to turn your garage or barn into a work space you can use all year-round, you will have to find a safe quiet and reliable heat source. This 80,000 BTU Natural Gas Utility heater is the way to go. It uses a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas. These heaters only require 115v AC power and can be vented vertically or horizontally - please check local codes and restrictions. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch. With the Durable Spark ignition and robust factory standard self diagnostic control module, we can offer a 3 year factory warranty on all parts and burners and a 10 year warranty on any defects in the heat exchanger. This heater offers the operating versatility and safety that you have come to expect from Mr. Heater®.

80,000 BTU per hour

For use with natural gas

Heats up to 2,667 sq. ft.

Spark ignition features self-diagnostic control module

Includes 2 angle brackets for ceiling mount

Low Profile Design - Can be installed in low-ceiling buildings

Minimum 8 ft clearance from floor to base of heater required

1/2in gas connection

Category 1 vertical, category 3 horizontal venting

Natural Gas to Liquid Propane conversion kit included

Thermostat sold separately

125,000 BTU per hour

For use with natural gas

Heats up to 4,167 sq. ft.

Spark ignition features self-diagnostic control module

Includes 2 angle brackets for ceiling mount

Low Profile Design - Can be installed in low-ceiling buildings

Heater accepts WiFi thermostats

Minimum 8 ft clearance from floor to base of heater required

1/2in gas connection

Category 1 vertical, category 3 horizontal venting

Natural Gas to Liquid Propane conversion kit included

Thermostat sold separately - recommended 24V
Details
Out of stock

Mr Heater® 125,000 BTU Big Maxx® Natural Gas Utility Heater MHU125

$1,795.00
If you are looking to turn your garage or barn into a work space you can use all year-round, you will have to find a safe quiet and reliable heat source. This 125,000 BTU Natural Gas Utility heater is the way to go. It uses a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas. These heaters only require 115v AC power and can be vented vertically or horizontally - please check local codes and restrictions. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch. With the Durable Spark ignition and robust factory standard self diagnostic control module, we can offer a 3 year factory warranty on all parts and burners and a 10 year warranty on any defects in the heat exchanger. This heater offers the operating versatility and safety that you have come to expect from Mr. Heater®.

125,000 BTU per hour

For use with natural gas

Heats up to 4,167 sq. ft.

Spark ignition features self-diagnostic control module

Includes 2 angle brackets for ceiling mount

Low Profile Design - Can be installed in low-ceiling buildings

Heater accepts WiFi thermostats

Minimum 8 ft clearance from floor to base of heater required

1/2in gas connection

Category 1 vertical, category 3 horizontal venting

Natural Gas to Liquid Propane conversion kit included

Thermostat sold separately - recommended 24V
Details
Out of stock

Delta Woodworking Heavy-Duty Oscillating Floor Spindle Sander 31-484 New

$1,799.00

The 31-484 heavy duty oscillating floor spindle sander was designed for precision and durability. The fully enclosed heavy duty steel frame construction is optimized for dust management and keeps vibration to a minimum. The Heavy duty cast iron trunnion system supports oil bath gear box, which provides increased stability and accuracy. A unique 0° to 45° tilting spindle arbor design allows for adjusting the sanding angle to bevel sand while the table remains flat.

Details
Out of stock

Rikon Model 10-326: 14″ Deluxe Bandsaw

$1,799.00

14” Bandsaw #10-326 is RIKON’s newest model with many Patent Pending features that professionals will enjoy – including spring-loaded tool-less blade quides, quick-adjust fence system and quick-lock trunnion table

angling system, plus, a quick release blade tension lever, large adjustment handles, hinged safety blade guard with sight window, high work table height, and storage cabinet base. Its dual voltage, 1-3/4HP motor provides ample power for most every work encountered. Designed with two speed options – just change the drive belt on the pulleys to change from fast to a slower blade speed. Includes 6” tall rip fence with re-saw bar. Wired for use with 3-wire 120V receptacles.

Details
Out of stock

SIMPSON PS3835 3800 PSI @ 3.5 GPM Gas Pressure Washer Powered by HONDA GX270

$1,799.90

The SIMPSON^® PowerShot™ Series is designed to meet the rigorous demands of the cleaning pro. Heavy-duty pressure washers with flow and reliability. Perfect for contractors who specialize in deck cleaning, wood restoration, paint preparation, graffiti removal, and all other professional cleaning services. Equipped with a premium HONDA^®engine built with high-quality components, designed for optimum performance and renowned for being easy to start. AAA^® triplex pumps with patent-pending PowerBoost^® Technology provides higher pressure at the nozzle resulting in greater impact and cleaning performance.

Details
DELTA 36-5000T2 10 in. Left Tilt Table Saw 30 in Rip Capacity with Steel Wings

$1,859.99
For over 100-years Delta has been meeting the needs of the most exacting Craftsmen. The Delta 36-5000T2 10 in. contractor table saw was designed with the professional in mind. Powered by a 15 Amp induction motor it is maximized for precision, durability, stability, and mobility. The heavy-duty 1-piece rail system, along with the Legendary Biesemeyer style fence system allows for precision cuts every time. The fence incorporates a special design allowing you to cut narrow pieces of stock. The saw has a large 30 in. rip capacity, 3-1/2 in. D of cut at 90° and 2-1/2 in. at 45°. A 2.5 in. dust collection port easily connects to a vacuum for efficient dust extraction to your work area clean. This is a BELT DRIVEN machine that offers low vibration and easy tensioning. A unique tubular stand with 2 fixed wheels and 1 swivel wheel makes the saw very stable and easy to move. Cut after cut, this saw is designed for the demands of the professional user and serious craftsman and Delta backs that up with its 5-year pledge to you.
- Powerful 15 Amp contractor grade motor easily handles hardwoods
- 52 in. rip capacity handles large stock and 13/16 in. x 8 in. stacked dado capacity
- Smooth and dependable adjustable belt drive table saw
- Cast iron table top with 2 cast steel extension wings
- Heavy-duty 1-piece rail system for precision cuts every time
- Legendary biesemeyer style fence system allows for precision cuts every time and has a special design allowing you to cut small pieces of stock
- 2.5 in. dust collection port easily connects to a vacuum for efficient dust extraction to your work area clean
- Unique tubular stand with 2 fixed wheels and 1 swivel wheel makes the saw very stable and easy to move
- California residents see Prop 65 WARNINGS
Add to cart Details
Out of stock

Wilton 1780A Tradesman Vise, 8″ Jaw Width, 7″ Jaw Opening, 4-3/4″ Throat (63202)

$1,866.99

WILTON Mechanics Pro Vises are designed and built using premium materials for unbeatable durability. Featuring an enclosed spindle, precision slide bar, innovative thrust bearing, 360 ̊ swivel, plus WILTON’s lifetime warranty—you’ll never want another vise, unless it’s a WILTON.

Details
DELTA 36-5100T2 10″ Left Tilt Table Saw 30″ Rip Cast Iron Wings

$1,890.00
On Back Order Until 2/10/21 For over 100-years Delta has been meeting the needs of the most exacting Craftsmen. The Delta 36-5100T2 10 in. contractor table saw was designed with the professional in mind. Powered by a 15 Amp induction motor it is maximized for precision, durability, stability, and mobility. The heavy-duty 1-piece rail system, along with the Legendary Biesemeyer style fence system allows for precision cuts every time. The fence incorporates a special design allowing you to cut narrow pieces of stock. The saw has a large 30 in. rip capacity, 3-1/2 in. D of cut at 90° and 2-1/2 in. at 45°. A 2.5 in. dust collection port easily connects to a vacuum for efficient dust extraction to your work area clean. This is a BELT DRIVEN machine that offers low vibration and easy tensioning. A unique tubular stand with 2 fixed wheels and 1 swivel wheel makes the saw very stable and easy to move. Cut after cut, this saw is designed for the demands of the professional user and serious craftsman and Delta backs that up with its 5-year pledge to you.
- Powerful 15 Amp contractor grade motor easily handles hardwoods
- 30 in. rip capacity handles large stock and 13/16 in. x 8 in. stacked dado capacity
- Smooth and dependable adjustable belt drive table saw
- Cast iron table top with 2 cast steel extension wings
- Heavy-duty 1-piece rail system for precision cuts every time
- Legendary biesemeyer style fence system allows for precision cuts every time and has a special design allowing you to cut small pieces of stock
- 2.5 in. dust collection port easily connects to a vacuum for efficient dust extraction to your work area clean
- Unique tubular stand with 2 fixed wheels and 1 swivel wheel makes the saw very stable and easy to move
- California residents see Prop 65 WARNINGS
Add to cart Details
Out of stock

Grizzly Industrial T27978-50-Ton Air/Hydraulic Shop Press

$1,890.00
For your toughest shop pressing and stamping needs, this versatile 50-Ton Hydraulic Shop Press does it all! The two-speed pump operates the ram at a slow or fast pace to accommodate a wide variety of pressing applications. Featuring a fast-pump core that allows the head assembly to lower to the workpiece quicker than a slow-pump core, a hand-operated winch for raising and lowering the bed, and a spring return ram for faster retraction. Features:
- Pneumatic and hydraulic hand-pump operation
- Winch and pulley system for lifting and lowering work table
- Built-in pressure gauge
- Welded steel frame for maximum rigidity
- Adjustable table accommodates wide variety of operations
- Includes two steel arbor plates
Specifications:
- Ram max applied force: 100,000 lbs. (50 tons)
- Hand winch lifting capacity: 1000 lbs.
- Ram maximum stroke: 7-7/16"
- Maximum distance to table: 39"
- Minimum distance to table: 9-1/4"
- Working air pressure: 110-125 PSI
- Footprint: 39-1/2"L x 27-1/2"W
- Overall dimensions: 51"W x 36"D x 68"H
- Approximate shipping weight: 540 lbs.
Details
Sale!

Grizzly G0632Z – 16″ x 42″ Variable-Speed Wood Lathe

~~$2,470.99~~ $1,890.00
G0632Z 16" x 42" Variable-Speed Wood Lathe

If you're looking for a lathe that will handle all of your turning needs, this is the one!
The G0632Z 16" x 42" Wood Lathe uses a variable-frequency inverter to control motor speed. The variable-frequency drive runs the 3-phase motor to provide variable-speed control and maximum torque at low speeds. The variable-speed control allows for spindle speed adjustment from 100–3200 RPM and the digital readout provides a precise reading of the current spindle speed. The headstock swivels for outboard turning and can be positioned anywhere along the bed for increased flexibility in workpiece setup. The swivel pin can lock the headstock at 0°, 45°, 90°, 135°, 180°, and 270°. The bed is precision-ground steel for strength and durability and the steel legs can be easily adapted for adding more mass. The tailstock, headstock, and tool rest support have lever-action cam locks for quick positioning.
Aside from its large turning capacities, this machine has all of the features you would hope for in a heavy-duty wood lathe.
Like all Grizzly lathes, the G0632Z comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The G0632Z manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your lathe. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.
SPECIFICATIONS:
- Motor: 2 HP, 220V, 3-phase, 8A
- Power requirement: 220V, single-phase
- Swing over bed: 16"
- Swing over tool rest: 11-1/2"
- Distance between centers: 42"
- Spindle taper: MT#2
- Spindle thread size: 1-1/4" x 8 TPI RH
- Tailstock taper: MT#2
- Spindle speed: Variable, 100–3200 RPM
- Headstock rotation: 0°, 45°, 90°, 135°, 180°, 270°
- Tool rest width: 14-1/8"
- Overall dimensions: 77-1/16" L x 22-1/16" W x 47" H
- Approximate shipping weight: 394 lbs.
FEATURES:
- Electronic variable-speed control
- Digital spindle-speed indicator
- 30° direct indexing using one indexing hole
- 10° indexing using all three indexing holes
- Headstock can be positioned anywhere along the bed
- Belt drive offers two speed ranges to maximize spindle torque
- Spindle lock pin
- Outboard spindle handle
- Forward/reverse switch
- Emergency stop switch
STANDARD EQUIPMENT:
- Spur center
- Cup live center
- Knockout tool
- Indexing pin
- Tool rest
- 6" face plate
- Hex wrenches
Add to cart Details
Delta 36-5152T2 10 in Table Saw Cast Iron Wings-52 in rip

$1,895.00

For over 100 years Delta has been meeting the needs of the most exacting Craftsmen. The Delta 36-5152T2 10” contractor table saw was designed with the professional in mind. Powered by a 15 amp induction motor it is maximized for precision, durability, stability, and mobility. The heavy duty one piece rail system, along with the Legendary Biesemeyer style fence system allows for precision cuts every time and has a special designed allowing you to cut small pieces of stock. The saw has a large 52 inch rip capacity, 3-1/8 inch depth of cut at 90 degrees and 2-1/4 inch at 45 degrees. A 2. 5-inch dust collection port easily connects to a vacuum for efficient dust extraction to your work area clean. This is a BELT DRIVEN machine that offers low vibration and easy tensioning. A unique tubular stand with two fixed wheels and one swivel wheel makes the saw very stable and easy to move. Cut after cut, this saw is designed for the demands of the professional user and serious craftsman and Delta backs that up with its 5-year pledge to you.

Add to cart Details
Tormek T-8 Ultimate Plus Kit(Tormek T-8 Original Sharpener + HTK-806 Hand Tool)

$1,898.00

A complete sharpening system for your sharpening needs – this bundle combines the Tormek T-8 water-cooled sharpening system with the HTK-806 hand tool sharpening jig and accessory kit, the TNT-808 Woodturner's Kit, and the SVH-320 Planer Blade Attachment
The HTK-806 hand tool kit includes 6 jigs for sharpening hand tools like knives, scissors, axes, carving tools, The TNT-808 includes jigs for gouges, chisels, V-tools, roughing gouges, and parting tools. Both come with their own storage case. With the SVH-320, you can sharpen HSS planer blades of any length

The Tormek T-8 is Tormek’s most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel, SE-77 Square Edge Jig to sharpen chisels and plane iron blades, PA-70 Honing Compound, WM-200 Angle Master, TT-50 Truing Tool, and Tormek Handbook.

Includes: Tormek T-8 Original, KJ-45 Centering Knife Jig. KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder, SVX-150 Scissor Jig, SVA-170 Axe Jig, SVS-38 Short Tool Jig, TC-800 Tormek Case, HTK-00 Storage Tray for Hand Tool Kit, TTS-100 Turning Tool Setter, MH-380 Machine Cover, LA-120 Profiled Leather Honing Wheel, TC-800 Tormek Case, TNT-00 Storage Tray for Woodturner’s Kit, SVD-186 R Gouge Jig, SVS-50 Multi Jig, SVD-110 Tool Rest, and SVH-320 Planer Blade Attachment

Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine.

Add to cart Details