Uncategorized

Sale!

Grizzly G0771Z – 10″ 2 HP 120V Hybrid Table Saw w T-Shaped Fence

~~$1,795.00~~ $1,590.00
This hybrid is a selective blend of the best features of the contractor-style table saw and cabinet style table saw. Like the cabinet saw, it has an enclosed cabinet with 4" dust port, heavy-duty cast iron trunnions that mount to the cabinet, and plenty of power (with its 2 HP motor) to easily rip through hardwoods or cut dadoes. Like the contractor-style saw, it's still light enough to move around (it weighs approximately 286 lbs. when fully assembled) and it's easy on the budget. The fence on this machine is also a hybrid of some of the best features we've had on table saws in the last 30+ years. It has the easy lift-off and simple adjustability of the popular T-shape Shop Fox® Classic fence, the rock-solid front locking ability of the Shop Fox® Original fence, and the accessory T-slots of the Shop Fox® Aluma-Classic fence. To top it all off, this saw features an innovative quick-release blade guard and riving knife system that can be changed in seconds—and it's prewired to run on an ordinary 120V, 20A circuit! ETL listed meeting UL 987 8th Edition and CSA C22.2 #71.2 standards! Made in an ISO 9001 Factory SPECIFICATIONS:
- Motor: 2 HP, 120V/240V (prewired 120V), single-phase, 15A/7.5A
- Rip capacity: 31" right, 16-3/4" left of blade
- Max. depth of cut @ 90°: 3-1/4"
- Max. depth of cut @ 45°: 2-1/4"
- Table size with extension wings: 40-1/2" W x 27" D
- Distance from front of table to center of blade: 15-1/2"
- Floor-to-table height: 35-3/8"
- Arbor diameter: 5/8"
- Arbor speed: 3450 RPM
- Max. width of dado: 13/16"
- Overall dimensions: 64" W x 40-1/4" D x 35-1/2" H
- Footprint: 21" L x 19-1/2" W
- Approximate shipping weight: 330 lbs.
FEATURES:
- Cast-iron table and extension wings
- Cast-iron trunnions
- Easy-glide fence system
- Quick-release blade guard & riving knife
- 4" Dust port
- T-slot miter gauge
- Beveled front table edge
Add to cart Details
Out of stock

Rikon 10-324TG 14″ Bandsaw

$1,599.99

14” Bandsaw 10-324TG is RIKON’s most popular model due to its many professional features – including tool-less blade guides, a quick release blade tension lever, large adjustment handles, hinged safety blade guard with sight window, high work table height, and base stand with storage shelf.

Its dual voltage, 1-1/2HP motor provides ample power for most every work encountered. Pre-lubricated, sealed thrust and side ball bearing guides give smooth blade support during difficult cuts. Includes 6″ tall rip fence with re-saw bar. Wired for use with 3-wire 115V receptacles.

• Rugged welded steel column and frame • Balanced cast aluminum drive wheels • Resaw Capacity 13″ • Dual blade speed ranges – 1445 / 2950 FPM • Machined cast iron table with miter gauge ‘T’ slots • Quick-release blade tension system • Rack and Pinion upper guide adjustments • Dependable 1.50HP 60Hz motor

Details
Sale!

Grizzly G0814X – 6″ Jointer W/Stand & V-Helical Cutterhead

~~$1,790.00~~ $1,690.00
Grizzly G0814X 6" Jointer W/Stand & V-Helical Cutterhead

An upgraded jointer with a V-helical cutterhead
Stepping up from our G0814 6" Jointer, the G0814X comes equipped with a 4-row V-helical cutterhead for unmatched finish and long-lasting cutter edge durability. The V-helical cutterhead features 24 indexable carbide inserts that can each be rotated up to 3 times to expose a new sharp edge. No more replacing or sharpening blades every time they get dull or nicked. You'll get quieter operation, and most importantly, a significantly better finish with less tear-out using this cutterhead vs. a straight-knife model. For increased mobility, the cabinet stand comes with a built-in mobile base. Engage the foot pedal caster to move your machine around. Lock the machine down when you are ready to work. The fence is fully adjustable from 45° to 135°. It has built-in stops at 45°, 90° and 135°. Like all of the Grizzly jointers, the G0814X comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0814X's manual is packed with useful information and the technical support team is U.S. based. Parts and accessories for the jointer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. Made in Taiwan SPECIFICATIONS:
- Motor: 1 HP, 110V/220V (prewired 110V), single-phase, 14A/7A
- Maximum width of cut: 6"
- Maximum depth of cut: 1/8"
- Maximum rabbeting depth: 1/2"
- Cutterhead diameter: 2-1/2"
- Cutterhead type: 4-row V-helical
- Insert size & type: 15mm x 15mm x 2.5mm, indexable carbide
- Cutterhead speed: 5000 RPM
- Table size: 6-5/8" x 47-3/8"
- Table adjustment type: Handwheel
- Fence size: 29-1/8" x 4"
- Minimum stock length: 8"
- Minimum stock width: 3/4"
- Minimum stock thickness: 1/2"
- Dust port size: 4"
- Footprint: 13-1/2" x 18"
- Overall dimensions: 47-1/2" W x 20" D x 42" H
- Approx. shipping weight: 260 lbs.
FEATURES:
- 4-row V-helical cutterhead with 26 indexable carbide inserts
- Cabinet stand with built-in mobile base
- Precision-ground cast-iron tables with dovetailed ways
- Heavy-duty center-mounted fence with stops at 45°, 90° & 135°
- V-belt drive system
- Cabinet-mounted power switch
- Includes two push blocks
Add to cart Details
Out of stock

Grizzly G0452Z – 6″ x 46″ Jointer w/ Spiral Cutterhead

$1,695.00
Another top-of-the line 6" Jointer from Grizzly, the G0452Z has everything you need: a 4-row spiral cutterhead with 32 indexable carbide inserts, dovetailed-way tables, handwheel control for dead-on accurate outfeed table adjustment, a large 5" x 35" cast-iron fence, convenient pedestal-mounted switch with large shut-off paddle, a solid one-piece cabinet stand with built-in mobile base, and much more! If you're looking for a 6" spiral cutterhead jointer at quality and price that can't be beat, this is it! Certified to CSA & UL standards SPECIFICATIONS:
- Motor: 1-1/2 HP, 120V/240V (prewired 120V), single-phase, 15A/7.5A
- Maximum width of cut: 6"
- Maximum depth of cut: 1/8"
- Maximum rabbeting depth: 1/2"
- Cutterhead diameter: 2-1/2"
- Cutterhead type: 4-row spiral with 32 inserts
- Insert size & type: 14 x 14 x 2mm, indexable carbide
- Cutterhead speed: 4800 RPM
- Table size: 7-1/2" x 46"
- Fence size: 35" L x 5" H
- Minimum stock length: 8"
- Minimum stock thickness: 1/2"
- Dust port size: 4"
- Footprint: 18" x 13-1/2"
- Overall dimensions: 46" W x 27-1/2" D x 49" H
- Approx. shipping weight: 268 lbs.
FEATURES:
- Precision-ground cast-iron tables & fence
- Tables slide on dovetailed ways
- Handwheel-adjusted outfeed table
- Lever-adjusted infeed table with depth gauge
- Rabbeting table
- Pedestal-mounted switch with large shut-off paddle
- Center-mounted fence with rack & pinion adjustment
- Fence stops at 45°, 90°, and 135°
- V-Belt drive
- Solid cabinet stand with built-in mobile base
- Pair of push blocks included
Details
Out of stock

JT9-708599 -JSG-6DC BELT/DISC SANDER

$1,699.95
JET JSG-6DC 6"x48" Belt / 12" Disc Benchtop Sander, 1-1/2HP, 1Ph 115/230V (708599)

About this item
- VERSATILITY: Precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles.
- LONGER LIFE: Graphite-covered steel platen runs cooler, increasing machine and belt life.
- EFFICIENCY: 4" dust port on the back of the base collects dust effectively from both the belt and disc.
- POWERFUL: 1-1/2 HP motor easily handles the toughest sanding operations.
- PORTABILITY: Built-in handles make machine relocation easier.
Details
Out of stock

Mr Heater® 80,000 BTU Big Maxx® Natural Gas Utility Heater MHU80

$1,725.00
If you are looking to turn your garage or barn into a work space you can use all year-round, you will have to find a safe quiet and reliable heat source. This 80,000 BTU Natural Gas Utility heater is the way to go. It uses a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas. These heaters only require 115v AC power and can be vented vertically or horizontally - please check local codes and restrictions. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch. With the Durable Spark ignition and robust factory standard self diagnostic control module, we can offer a 3 year factory warranty on all parts and burners and a 10 year warranty on any defects in the heat exchanger. This heater offers the operating versatility and safety that you have come to expect from Mr. Heater®.

80,000 BTU per hour

For use with natural gas

Heats up to 2,667 sq. ft.

Spark ignition features self-diagnostic control module

Includes 2 angle brackets for ceiling mount

Low Profile Design - Can be installed in low-ceiling buildings

Minimum 8 ft clearance from floor to base of heater required

1/2in gas connection

Category 1 vertical, category 3 horizontal venting

Natural Gas to Liquid Propane conversion kit included

Thermostat sold separately

125,000 BTU per hour

For use with natural gas

Heats up to 4,167 sq. ft.

Spark ignition features self-diagnostic control module

Includes 2 angle brackets for ceiling mount

Low Profile Design - Can be installed in low-ceiling buildings

Heater accepts WiFi thermostats

Minimum 8 ft clearance from floor to base of heater required

1/2in gas connection

Category 1 vertical, category 3 horizontal venting

Natural Gas to Liquid Propane conversion kit included

Thermostat sold separately - recommended 24V
Details
Out of stock

Mr Heater® 125,000 BTU Big Maxx® Natural Gas Utility Heater MHU125

$1,795.00
If you are looking to turn your garage or barn into a work space you can use all year-round, you will have to find a safe quiet and reliable heat source. This 125,000 BTU Natural Gas Utility heater is the way to go. It uses a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas. These heaters only require 115v AC power and can be vented vertically or horizontally - please check local codes and restrictions. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch. With the Durable Spark ignition and robust factory standard self diagnostic control module, we can offer a 3 year factory warranty on all parts and burners and a 10 year warranty on any defects in the heat exchanger. This heater offers the operating versatility and safety that you have come to expect from Mr. Heater®.

125,000 BTU per hour

For use with natural gas

Heats up to 4,167 sq. ft.

Spark ignition features self-diagnostic control module

Includes 2 angle brackets for ceiling mount

Low Profile Design - Can be installed in low-ceiling buildings

Heater accepts WiFi thermostats

Minimum 8 ft clearance from floor to base of heater required

1/2in gas connection

Category 1 vertical, category 3 horizontal venting

Natural Gas to Liquid Propane conversion kit included

Thermostat sold separately - recommended 24V
Details
Out of stock

Rikon Model 10-326: 14″ Deluxe Bandsaw

$1,799.00

14” Bandsaw #10-326 is RIKON’s newest model with many Patent Pending features that professionals will enjoy – including spring-loaded tool-less blade quides, quick-adjust fence system and quick-lock trunnion table

angling system, plus, a quick release blade tension lever, large adjustment handles, hinged safety blade guard with sight window, high work table height, and storage cabinet base. Its dual voltage, 1-3/4HP motor provides ample power for most every work encountered. Designed with two speed options – just change the drive belt on the pulleys to change from fast to a slower blade speed. Includes 6” tall rip fence with re-saw bar. Wired for use with 3-wire 120V receptacles.

Details
Out of stock

Delta Woodworking Heavy-Duty Oscillating Floor Spindle Sander 31-484 New

$1,799.00

The 31-484 heavy duty oscillating floor spindle sander was designed for precision and durability. The fully enclosed heavy duty steel frame construction is optimized for dust management and keeps vibration to a minimum. The Heavy duty cast iron trunnion system supports oil bath gear box, which provides increased stability and accuracy. A unique 0° to 45° tilting spindle arbor design allows for adjusting the sanding angle to bevel sand while the table remains flat.

Details
Out of stock

SIMPSON PS3835 3800 PSI @ 3.5 GPM Gas Pressure Washer Powered by HONDA GX270

$1,799.90

The SIMPSON^® PowerShot™ Series is designed to meet the rigorous demands of the cleaning pro. Heavy-duty pressure washers with flow and reliability. Perfect for contractors who specialize in deck cleaning, wood restoration, paint preparation, graffiti removal, and all other professional cleaning services. Equipped with a premium HONDA^®engine built with high-quality components, designed for optimum performance and renowned for being easy to start. AAA^® triplex pumps with patent-pending PowerBoost^® Technology provides higher pressure at the nozzle resulting in greater impact and cleaning performance.

Details
DELTA 36-5000T2 10 in. Left Tilt Table Saw 30 in Rip Capacity with Steel Wings

$1,859.99
For over 100-years Delta has been meeting the needs of the most exacting Craftsmen. The Delta 36-5000T2 10 in. contractor table saw was designed with the professional in mind. Powered by a 15 Amp induction motor it is maximized for precision, durability, stability, and mobility. The heavy-duty 1-piece rail system, along with the Legendary Biesemeyer style fence system allows for precision cuts every time. The fence incorporates a special design allowing you to cut narrow pieces of stock. The saw has a large 30 in. rip capacity, 3-1/2 in. D of cut at 90° and 2-1/2 in. at 45°. A 2.5 in. dust collection port easily connects to a vacuum for efficient dust extraction to your work area clean. This is a BELT DRIVEN machine that offers low vibration and easy tensioning. A unique tubular stand with 2 fixed wheels and 1 swivel wheel makes the saw very stable and easy to move. Cut after cut, this saw is designed for the demands of the professional user and serious craftsman and Delta backs that up with its 5-year pledge to you.
- Powerful 15 Amp contractor grade motor easily handles hardwoods
- 52 in. rip capacity handles large stock and 13/16 in. x 8 in. stacked dado capacity
- Smooth and dependable adjustable belt drive table saw
- Cast iron table top with 2 cast steel extension wings
- Heavy-duty 1-piece rail system for precision cuts every time
- Legendary biesemeyer style fence system allows for precision cuts every time and has a special design allowing you to cut small pieces of stock
- 2.5 in. dust collection port easily connects to a vacuum for efficient dust extraction to your work area clean
- Unique tubular stand with 2 fixed wheels and 1 swivel wheel makes the saw very stable and easy to move
- California residents see Prop 65 WARNINGS
Add to cart Details
Out of stock

Wilton 1780A Tradesman Vise, 8″ Jaw Width, 7″ Jaw Opening, 4-3/4″ Throat (63202)

$1,866.99

WILTON Mechanics Pro Vises are designed and built using premium materials for unbeatable durability. Featuring an enclosed spindle, precision slide bar, innovative thrust bearing, 360 ̊ swivel, plus WILTON’s lifetime warranty—you’ll never want another vise, unless it’s a WILTON.

Details