Enhance the versatility and convenience of your SuperMax 13'' Combo Brush/Drum Sander with the SuperMax 13'' Flatter Sanding Hub with Dovetail Slots. This hub serves as a replacement for a damaged hub, or as an additional accessory, allowing you to keep a different grit of flatter strips readily available for your sanding needs. The hub features dovetail slots, ensuring a secure fit for your sanding strips. With a diameter of 120mm and a length of 312mm, this hub is designed to fit your sander perfectly.
-
-
- Compatible Sander: 13" SuperMax Combo Brush/Drum Sander
- Bore Diameter: 2''
- Overall Dimensions: 120mm dia x 312mm long
- wt 18lbs
-
Out of stock
Heavy-duty design built for the jobsite. This Thermostatically controlled Mr. Heater 400,000 BTU Propane Forced Air Heater comes with a standard 10ft hose, regulator, and all the safety you would expect of a Mr. Heater product. Equipped with factory installed high limit switch and continuous solid state ignition, you can feel comfortable using this heater on any jobsite. Just plug the heater into a 110v outlet then hook up the included hose and regulator to a 100lb propane tank or larger, then you are ready to take the chill out of any job.- 250,000 - 400,000 BTU per hour
- For use with propane gas
- Heats up to 10,000 sq. ft.
- Operates up to 17 hours on 2-100 lb. propane tanks on low setting
- Rugged and durable steel construction
- Economical, efficient and clean burning
- Heavy duty high output fan
- Hose and regulator included
- Two 100 lb. propane tanks are required
-
G1183 6" x 48" Belt/12" Disc Combo Sander
Built to the scale and level of quality professional woodworkers and metalworkers demand.
The heavy-duty G1183 6" x 48" Belt/12" Disc Combo Sander features a sanding belt that operates horizontally, vertically or at any angle in between. The sanding belt speed is 5000 FPM and the disc speed is 3450 RPM. Both cast-iron tables tilt for any job. The belt sander table tilts 90° while the disc sander table tilts 30° left and 45° to the right. The convenient, quick-release lever makes tension adjustment and belt changes and a snap. There is a full range of replacement sanding belts and sanding discs for the G1183. Belt rollers have shielded ball bearings and the top roller has a fine-tuning knob for precision tracking. The base accepts 5/8" fasteners for mounting to workbench. Like all Grizzly combination sanders, the G1183 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G1183 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your sander. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the combination sander may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factorySPECIFICATIONS:
- Motor: 1 HP, 110V/220V, single-phase, 12A/6A
- Sanding belt size: 6" x 48"
- Sanding belt speed: 5000 FPM
- Belt platen size: 6" x 14-1/2"
- Belt table size: 7" x 12-1/2"
- Disc diameter: 12"
- Disc backing type: PSA
- Disc speed: 3450 RPM
- Disc table size: 7" x 16-1/2"
- Table tilt 30° L, 45° R
- Number of dust ports: 2
- Dust port sizes: 2-1/2", 3"
- Footprint: 17" x 14"
- Overall dimensions: 32-1/2" W x 16-1/2" D x 29-1/2" H
- Approximate shipping weight: 148 lbs.
FEATURES:
- Quick belt release
- Disc table positive stops at 90°
- Belt table positive stops at 45° and 90°
- Two cast-iron tables
- Top roller has fine tracking knob
- Miter gauge included
-
Out of stock
-
The Tormek T-8 is our top of the line water-cooled sharpening system, and is – by far – the best sharpening system one can buy. If you use tools that need a finely honed, razor-sharp edge, this machine will give you a lifetime of excellent service, and ensure your tools have an edge that allows you to effortlessly work your magic. It sharpens all manner of tools – knives, scissors, wood chisels, plane irons, spoke shaves, carving tools, lathe turning tools, Axes, and much more. If it has an edge, the Tormek T-8 will sharpen it. The Tormek Grindstone is constructed so that with the Stone Grader it can be treated to change its property from 220 grit to 1, 000 grit. This has obvious advantages. You can make both the first fast grinding and the sharpening on the same grindstone and the same grinding machine and with the same jig setting. After grinding, the 8-5/8" diameter x 1-7/32" genuine leather honing wheel gently removes the burr and hones the edge to razor sharpness. The T-8 System includes the Advanced Square Edge Jig, Truing and Dressing Tool, Stone Grader, Angle Master, Honing Compound, Handbook and Instructional DVD and comes with a seven-year factory . Also included is Tormek’s patented Drill Bit Attachment which allows you to sharpen your drill bits with the highest precision. The beneficial 4-facet point prevents drill from “walking” that is normal with standard round point bits. The high precision sharpening – both cutting edges are sharpened to an exact equal length and symmetrically – make the drill work efficiently and the life of the drill bit is considerably prolonged. The optimal point and clearance angles can be set according to each drilling requirement, which depends upon the drill size and material. Completely restore worn drills as well as broken drills to a perfect shape. Stainless steel shaft and hardware -
This bundle combines the Tormek T-8 water-cooled sharpening system with the DBS-22 Drill Bit Sharpening Attachment.This Tormek T-8 Drill Bit Sharpener Kit includes the DBS-22 Drill Bit Sharpening Attachment to sharpen your drill bits (3-22 mm) with the highest precision. The DBS-22 Drill Bit Attachment allows for complete control when sharpening drill bits eliminating the risk of overheating the steel. You can completely restore worn as well as broken drill bits to a perfect shape.The Tormek T-8 is Tormek’s most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheelIncludes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, TT-50 Truing Tool, WM-200 Angle Master, SP-650 Stone Grader, DBS-22 Drill Bit Sharpening AttachmentNote: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine. -
WILTON Mechanics Pro Vises are designed and built using premium materials for unbeatable durability. Featuring an enclosed spindle, precision slide bar, innovative thrust bearing, 360 ̊ swivel, plus WILTON’s lifetime warranty—you’ll never want another vise, unless it’s a WILTON. -
Out of stock
Proven design and technology come together in this beautiful pellet stove. Designed for moderately sized homes and condos, the 5040 comes with high end features such as remote thermostat hookups and simple to use control all packed into a neat little package that is perfect for smaller spaces. The digital control board has 4 heat settings and offers on/off or ultra low burn settings to give you up to 40 hours of burn time with the 45 lb hopper. This is a classic stove design that is worthy of most any space in your home. Pellet heaters work by using a software driven control board to precisely deliver a pre-determined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home. -
Sale!
Customer return. Dings, dents, scratches, chipped paint, bent brackets, filter screen dent.
G0860 1-1/2 HP Portable Cyclone Dust Collector
For the shop tight on space needing a portable dust collector.
The G0860 1-1/2 HP Portable Cyclone Dust Collector features an impressive 868 CFM and up to 9.7" of static pressure, creating a vortex of incoming air that extracts heavy wood chips and large dust particles into a plastic-bag-lined steel drum. The remaining fine dust travels past the 12-3/4" aluminum impeller, is caught by a canister filter and then deposited in a separate plastic collection bag. The spun-bond polyester filter catches 99.9% of particles to 1-micron in size and is pleated to provide maximum surface area for efficient air flow. A turn of the crank handle rotates the paddle brushes, knocking caked-on dust off of the pleats to keep your CFM as high as possible. The collection drum features a quick-release handle that makes it easy to roll it out for sawdust disposal. This cyclone has a normal operating sound range of 78 dB, slightly quieter than a telephone dial tone.A great value for the price and an upgrade over any single-stage unit.
Replacement T30314 Filters are available. The upgraded T30489 HEPA Filters are also available for those wanting to capture particles down to 0.3 microns. Like all Grizzly machines, the G0860 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The G0860 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your two-stage dust collection system. The Grizzly Customer Service and Technical Support Teams are U.S. based. Made in an ISO 9001 factorySPECIFICATIONS
- Motor: 1-1/2 HP, 110V, single-phase, 15A
- Intake hole size: 6"
- Impeller: 12-3/4" aluminum
- Airflow capacity: 868 CFM @ 1.8" SP
- Max static pressure: 9.7"
- Filtration: 1-micron
- Filter surface area: 28.1 sq. ft.
- Collection size: 20-gallon drum
- Sound rating: 78dB
- Overall dimensions: 27-1/2" W x 44" L x 70" H
- Approximate shipping weight: 278 lbs.
FEATURES
- Collection drum with quick-release handle for easy disposal
- Two-stage operation for ultimate dust collection
- Swivel casters
- Lift handle and roll drum for easy sawdust disposal
- Pleated filter with paddle brushes and crank handle for max air flow efficiency
- Vacuum equalizer built into collection drum for use with disposable plastic bags
- Wireless remote control
Unit sold as is.
-
Out of stock
The 10” Left Tilt Contractor Table Saw 10-205 is a no-nonsense machine whose simplicity is the strength behind its popularity with home craftspeople and professional workshops. Operating this table saw is straight forward – blade controls are large and easy to access, box-type rip fence sets accurately,Dual table ‘T’ slots give great options for use of miter gauges and other jigs, blade changes are easy, blade guards and control switch with large ‘off’ paddle add excellent safety measures to the user, and the built-in mobile base allows moving the saw around the shop easy. Wired for use with 3-wire 120V receptacles.• Powerful 1-3/4 HP, 1Ph, 120/240V, 3450 RPM motor • Industrial quality, multi-ribbed flat J-belt for smooth power transfer • Precision machined cast iron table top and wings • Dual table ‘T’ slots for use with miter gauges and jigs • Magnetic table insert removes without tools • Clear blade guard with riving knife/splitter for extra user safety -
The 16-32 Drum Sander (#71632) is the newest member of SuperMax Tools drum sander family which was designed with new features to improve productivity.-
Exceptional SuperMax Features
Supermax has addressed issue common with other drum sanders by engineering features that are exclusive to their 16-32 machines. No other drum sander on the market has these features!- Patented “Quick Lever Adjustment” which allows height adjustments from 0″-3″ with one pull of a lever versus 48 revolutions of a hand wheel greatly reducing set-up time and increases productivity
- Includes build-in Digital Read Out which helps maintain consistent thicknesses to increase accuracy and quality.
- A newly designed Turbo Vented Dust Port increases CFM air-flow to dust collectors by 15%.
- Simple alignment feature – just one nut adjusts the conveyor to parallel the sanding head, making aligning the conveyor to the sanding head fast and easy
- Indexed alignment setting – the fast lever is an indexed alignment setting for narrow and wide stock. When sanding stock wider than 16″, the index lever will properly adjust the conveyor for flawless wide sanding.
- Drum will never go “out of alignment” – the drum carriage is bolted to the base, preventing any movement or alignment issues.
- INTELLISAND Technology
- CSA Certified
- Folding in feed/out feed tables sold separately
-