- Replaces c-clamps
- Ergonomic wood grip handle
- Lighter duty clamp for delicate projects
- Protective cap prevents damage to material
-
T-Track Products (6)
-
Auto Adjust Toggle Clamps (5)
-
Bar Clamps (13)
-
Bench Clamping Systems (1)
-
Hold Downs (2)
-
Parallel Clamps (2)
-
Track Clamps (2)
-
Out of stock
The Mighty Mini is a general-purpose clamp that does the work of a 1", 2", or 3" C-Clamp, but nine times faster. Rail size: 19/32" x 3/16"; throat depth: 2"; capacity: 4"; and nominal clamping pressure: 330 lbs. The clamp is part of Bessey's Tradesman line that features a patented nonslip locking system, greater holding power than any other clutch-style clamp, corrugated cast jaws, high quality galvanized profiled rail, and glue-resistant non-marring plastic caps. -
The Bora Pistol Grip Clamp is made of lightweight composite material with a hardened steel bar. Leaf spring-style closing mechanism produces greater clamping pressure than other similar clamps.- Hi-Tech composite body allows "Best in Class" clamping pressure
- Large soft-grip ergonomically designed handles
- Reversible head for clamping or spreading
- V-Groove clamping pads for clamping around objects
-
These sturdy auxiliary clamps slide into the T-channel of the clamp track and lock into place, turning your clamp edge into a solid vise. This allows any material you are working on to be safely held in place as you glue, sand, finish, or even go to work with your router. -
Out of stock
-
If you're planning on making a sliding jig or fixture for your woodworking shop, the INCRA Miter Slider is exactly what you need. These inexpensive aluminum runners adjust for PERFECT sliding action in any standard (or near standard) 3/4" by 3/8" miter gauge slot with just a twist of the wrist. They lock firmly in place with another twist of the wrist. Won't warp, shrink or swell like wooden runners. Includes plans for a wide variety of shop-made jigs and fixtures. Anodized aluminum for durability and beauty. Available in 18" and 24" lengths. Eliminate the tedious process of making, fitting and adjusting the wooden runners on your sliding table saw jigs. Just screw these special extruded aluminum runners to your jigs and you're ready. Miter sliders have unique expansion mechanisms in their body that perfectly adjust to any standard 3/4" x 3/8" miter gauge slot. Each Slider includes plans for building a variety of table saw jigs. -
-
Why trust the operation of your Incra Miter Gauge or Miter Slider in just any miter track. The Miter Channel was designed with the same Incra quality and precision to act as the perfect guide for all of your miter needs. Each channel is constructed of hard anodized aluminum for durability with Incra's trademark gold finish. Mounting is easy with pre-drilled holes and included fasteners; simply cut a 1-1/8” wide, 1/2” deep groove in your table. Create a laminated fixture using 1/2” thick material on either side of the channel. The “T-Slot” design can be used in conjunction with hold-downs. Will work with any standard 3/8” x 3/4” miter bar. Now you can add an INCRA T-Slot Miter Channel to any router table or user-made fixture for use with your miter gauge, feather boards, hold-downs or sliding jigs. Works with INCRA Miter Sliders and INCRA Miter Gauges or any standard 3/8-inch by 3/4-inch miter bar. T-Slot design for hold down capability. Mounts easily with pre-drilled holes and included fasteners. Hard anodized aluminum for durability. -
-
-
Why trust the operation of your Incra Miter Gauge or Miter Slider in just any miter track. The Miter Channel was designed with the same Incra quality and precision to act as the perfect guide for all of your miter needs. Each channel is constructed of hard anodized aluminum for durability with Incra's trademark gold finish. Mounting is easy with pre-drilled holes and included fasteners; simply cut a 1-1/8” wide, 1/2” deep groove in your table. Create a laminated fixture using 1/2” thick material on either side of the channel. The “T-Slot” design can be used in conjunction with hold-downs. Will work with any standard 3/8” x 3/4” miter bar. Now you can add an INCRA T-Slot Miter Channel to any router table or user-made fixture for use with your miter gauge, feather boards, hold-downs or sliding jigs. Works with INCRA Miter Sliders and INCRA Miter Gauges or any standard 3/8-inch by 3/4-inch miter bar. T-Slot design for hold down capability. Mounts easily with pre-drilled holes and included fasteners. Hard anodized aluminum for durability.
-
If you're planning on making a sliding jig or fixture for your woodworking shop, the INCRA Miter Slider is exactly what you need. These inexpensive aluminum runners adjust for PERFECT sliding action in any standard (or near standard) 3/4" by 3/8" miter gauge slot with just a twist of the wrist. They lock firmly in place with another twist of the wrist. Won't warp, shrink or swell like wooden runners. Includes plans for a wide variety of shop-made jigs and fixtures. Anodized aluminum for durability and beauty. Available in 18" and 24" lengths. Eliminate the tedious process of making, fitting and adjusting the wooden runners on your sliding table saw jigs. Just screw these special extruded aluminum runners to your jigs and you're ready. Miter sliders have unique expansion mechanisms in their body that perfectly adjust to any standard 3/4" x 3/8" miter gauge slot. Each Slider includes plans for building a variety of table saw jigs.
-
-
-
- n the clamped position, the lever is horizontal
- Automatic and infinitely variable adjustment of the clamping height up to 35 mm while clamping force remains unchanged – without having to make manual changes to the position of the pressure screws
- Clamping force is variable up to 2,500 N depending on the adjustment of the set screw in the cantilevered joint
- Sturdy, tempered metal sheets for a long service life
- Hole pattern on the base plate designed to facilitate fast and secure clamping set-up for metric and imperial
- High-quality oil resistant two-component plastic handle
-
- Adjustable Clamping Force - the integrated clamping force adjustment screw can be used to create an actually applied clamping force from 25 to 250 lbs. (max holding capacity 450 lbs.)
- The BESSEY Auto-Adjust Toggle Clamp automatically adjusts to variations in work piece dimensions while maintaining constant clamping force
- No more time-consuming manual adjustment of the spindle height to maintain safe and correct clamping force
- One BESSEY Auto-Adjust Toggle Clamp can replace a range of competitive clamps
- A removable non-marring plastic cap is included on the steel pressure pads.
-
Out of stock
Long known for their premium full-sized K Body REVO parallel clamp; BESSEY set out to produce a more compact version of this industry icon. The result of this effort is the K Body REVO.- 900 lbs. of clamping force
- Lighter weight means less fatigue and greater productivity
- Quality construction
- High-end quality with a mid-sized price
- 3-1/4" throat depth
-
- Adjustable Clamping Force - the integrated clamping force adjustment screw can be used to create an actually applied clamping force from 25 to 550 lbs. (max holding capacity 700 lbs.)
- The BESSEY Auto-Adjust Toggle Clamp automatically adjusts to variations in work piece dimensions while maintaining constant clamping force
- No more time-consuming manual adjustment of the spindle height to maintain safe and correct clamping force
- One BESSEY Auto-Adjust Toggle Clamp can replace a range of competitive clamps
- A removable non-marring plastic cap is included on the steel pressure pads
- The large (2 1/4” by 2 1/2”) flanged base is designed for use with 1/4” or M6 fasteners
- Extra large 1” x 2 1/8” cushion grip handle offers greater user comfort and ease of op
-
-
-
-
- For use with the Triton Track Saw TTS1400
- Quick and effective clamping for Triton guide rails
- Clamps slot beneath rail without obstructing work piece
-
-
-
